salix
A 2004 era x86 PC.
Specification
| Mainboard | ASUS A7N8X, Chipset: NVIDIA nForce2 (Wikipedia) |
|---|---|
| CPU | AMD Athlon XP 3000+, 2.167 GHz, "Barton", 333 MHz FSB |
| RAM | 2 GiB DDR, PC2700 (3 GiB max.) |
| Storage | PATA Contoller: integrated NVIDIA nForce2 IDE |
| Maxtor 6Y080L0, 80 GB, PATA UDMA/133 | |
| LITE-ON SHW-160P6S, DVD-RW, PATA | |
| SATA Controller: integrated Silicon Image, SiI 3112 with RAID support | |
| Floppy: 3.5" 1.44MB | |
| Video | ASUS N6800/TD/512M AGP, 512MB, NVIDIA (NV40) GeForce 6800 |
| Audio | integrated AC'97 (Wikipedia), NVIDIA Corporation nForce2 AC97 |
| Network | integrated 10/100 Mb/s ethernet, NVIDIA nForce2 Ethernet |
| integrated 10/100 Mb/s ethernet, 3Com 3C920B-EMB (Tornado) | |
| NE2k compatible 10 Mb/s ethernet, Realtek RTL-8029(AS) | |
| OS | Debian Linux 11 for i386 |
| Microsoft Windows XP for x86 |
This machine ran MS Windows 7 until an update in 2018 dropped support for non-SSE2 processors, including AMD Athlon XP and Intel Pentium III CPUs.
The CPU is the 333MHz front-side bus (FSB) version of the AMD Athlon XP 3000+, rather than its 400MHz FSB sibling. Thus the CPU is clocked at ~2,167MHz (166MHz * 13) rather than the ~2,100 MHz (200MHz * 10.5) used by the alternative version of the AMD Athlon XP 3000+. The 400MHz FSB version requires memory supporting DDR-400 (aka. PC-3200) rather than the DDR-333 used here.
Contents
- Specification
- Contents
- System Information - RedHat Linux 7.3 (Valhalla)
- System Information - Ubuntu 8.04 LTS (Hardy Heron)
- System Information - Ubuntu 14.04 LTS (Trusty Tahr)
- System Information - Debian Linux 11 (bullseye)
- Benchmark
- Further References
System Information - RedHat Linux 7.3 (Valhalla)
Released in 2002 RedHat Linux 7.3 uses a Linux 2.4 kernel and has limited support for the 2002/2003/2004 hardware in this system.
uname
Operating system release and version information:
$ uname -a Linux localhost.localdomain 2.4.18-3 #1 Thu Apr 18 07:32:41 EDT 2002 i686 unknown
So a "Linux" kernel, on a node named "localhost.localdomain", kernel release "2.4.18-3" (a patched 2.4.18 kernel), version "#1 Thu Apr 18 07:32:41 EDT 2002", machine type "i686".
/proc/cpuinfo
Processor information:
$ cat /proc/cpuinfo processor : 0 vendor_id : AuthenticAMD cpu family : 6 model : 10 model name : AMD Athlon(tm) XP 3000+ stepping : 0 cpu MHz : 2162.737 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow bogomips : 4312.26
So the expected AMD Athlon XP 3000+ with the reported frequency giving away that this is the 333 MHz FSB model.
/proc/meminfo
Memory information:
$ cat /proc/meminfo
total: used: free: shared: buffers: cached:
Mem: 2115125248 231948288 1883176960 0 39403520 97943552
Swap: 2090180608 0 2090180608
MemTotal: 2065552 kB
MemFree: 1839040 kB
MemShared: 0 kB
Buffers: 38480 kB
Cached: 95648 kB
SwapCached: 0 kB
Active: 124352 kB
Inact_dirty: 2792 kB
Inact_clean: 12172 kB
Inact_target: 27860 kB
HighTotal: 1179584 kB
HighFree: 1077092 kB
LowTotal: 885968 kB
LowFree: 761948 kB
SwapTotal: 2041192 kB
SwapFree: 2041192 kB
Committed_AS: 6400 kB
Shows the expected 2 GiB of installed memory.
lspci & /proc/bus/pci/devices
List PCI devices:
$ lspci 00:00.0 Host bridge: nVidia Corporation: Unknown device 01e0 (rev a2) 00:00.1 RAM memory: nVidia Corporation: Unknown device 01eb (rev a2) 00:00.2 RAM memory: nVidia Corporation: Unknown device 01ee (rev a2) 00:00.3 RAM memory: nVidia Corporation: Unknown device 01ed (rev a2) 00:00.4 RAM memory: nVidia Corporation: Unknown device 01ec (rev a2) 00:00.5 RAM memory: nVidia Corporation: Unknown device 01ef (rev a2) 00:01.0 ISA bridge: nVidia Corporation: Unknown device 0060 (rev a3) 00:01.1 SMBus: nVidia Corporation: Unknown device 0064 (rev a2) 00:02.0 USB Controller: nVidia Corporation: Unknown device 0067 (rev a3) 00:02.1 USB Controller: nVidia Corporation: Unknown device 0067 (rev a3) 00:02.2 USB Controller: nVidia Corporation: Unknown device 0068 (rev a3) 00:04.0 Ethernet controller: nVidia Corporation: Unknown device 0066 (rev a1) 00:05.0 Multimedia audio controller: nVidia Corporation: Unknown device 006b (rev a2) 00:06.0 Multimedia audio controller: nVidia Corporation: Unknown device 006a (rev a1) 00:08.0 PCI bridge: nVidia Corporation: Unknown device 006c (rev a3) 00:09.0 IDE interface: nVidia Corporation: Unknown device 0065 (rev a2) 00:0c.0 PCI bridge: nVidia Corporation: Unknown device 006d (rev a3) 00:0d.0 FireWire (IEEE 1394): nVidia Corporation: Unknown device 006e (rev a3) 00:1e.0 PCI bridge: nVidia Corporation: Unknown device 01e8 (rev a2) 01:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS) 01:0b.0 RAID bus controller: CMD Technology Inc: Unknown device 3112 (rev 02) 02:01.0 Ethernet controller: 3Com Corporation: Unknown device 9201 (rev 40) 03:00.0 VGA compatible controller: nVidia Corporation: Unknown device 0041 (rev a1)
Lots of devices here... the "nVidia" devices are mostly integrated on the mainboard chipset, with an additional 10 Mb/s ethernet card in a PCI slot, and an "nVidia" AGP graphics card in the AGP slot. The raw PCI bus devices list hints at the associated drivers:
$ cat /proc/bus/pci/devices 0000 10de01e0 0 e0000008 00000000 00000000 00000000 00000000 00000000 00000000 04000000 00000000 00000000 00000000 00000000 00000000 00000000 0001 10de01eb 0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 0002 10de01ee 0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 0003 10de01ed 0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 0004 10de01ec 0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 0005 10de01ef 0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 0008 10de0060 0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 0009 10de0064 b 0000e001 00000000 00000000 00000000 00000000 00000000 00000000 00000020 00000000 00000000 00000000 00000000 00000000 00000000 0010 10de0067 5 eb087000 00000000 00000000 00000000 00000000 00000000 00000000 00001000 00000000 00000000 00000000 00000000 00000000 00000000 usb-ohci 0011 10de0067 5 eb082000 00000000 00000000 00000000 00000000 00000000 00000000 00001000 00000000 00000000 00000000 00000000 00000000 00000000 usb-ohci 0012 10de0068 b eb083000 00000000 00000000 00000000 00000000 00000000 00000000 00000100 00000000 00000000 00000000 00000000 00000000 00000000 ehci-hcd 0020 10de0066 b eb086000 0000e401 00000000 00000000 00000000 00000000 00000000 00001000 00000008 00000000 00000000 00000000 00000000 00000000 0028 10de006b b eb000000 00000000 00000000 00000000 00000000 00000000 00000000 00080000 00000000 00000000 00000000 00000000 00000000 00000000 0030 10de006a 5 0000d001 0000d401 eb080000 00000000 00000000 00000000 00000000 00000100 00000080 00001000 00000000 00000000 00000000 00000000 0040 10de006c 0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 PCI Bridge 0048 10de0065 0 00000000 00000000 00000000 00000000 0000f001 00000000 00000000 00000000 00000000 00000000 00000000 00000010 00000000 00000000 0060 10de006d 0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 PCI Bridge 0068 10de006e 5 eb084000 eb085000 00000000 00000000 00000000 00000000 00000000 00000800 00000040 00000000 00000000 00000000 00000000 00000000 00f0 10de01e8 0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 PCI Bridge 0150 10ec8029 5 0000a001 00000000 00000000 00000000 00000000 00000000 00000000 00000020 00000000 00000000 00000000 00000000 00000000 00000000 ne2k-pci 0158 10953112 b 0000a401 0000a801 0000ac01 0000b001 0000b401 ea000000 00000000 00000008 00000004 00000008 00000004 00000010 00000200 00080000 0208 10b79201 5 0000c001 e5000000 00000000 00000000 00000000 00000000 00000000 00000080 00000080 00000000 00000000 00000000 00000000 00020000 0300 10de0041 b e6000000 c0000008 e7000000 00000000 00000000 00000000 00000000 01000000 20000000 01000000 00000000 00000000 00000000 00020000
For a more explicit connection between the cards and their drivers use lspci -v, although it has a lot more output.
This kernel also features the old /proc/pci interface:
$ cat /proc/pci
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: PCI device 10de:01e0 (nVidia Corporation) (rev 162).
Prefetchable 32 bit memory at 0xe0000000 [0xe3ffffff].
Bus 0, device 0, function 1:
RAM memory: PCI device 10de:01eb (nVidia Corporation) (rev 162).
Bus 0, device 0, function 2:
RAM memory: PCI device 10de:01ee (nVidia Corporation) (rev 162).
Bus 0, device 0, function 3:
RAM memory: PCI device 10de:01ed (nVidia Corporation) (rev 162).
Bus 0, device 0, function 4:
RAM memory: PCI device 10de:01ec (nVidia Corporation) (rev 162).
Bus 0, device 0, function 5:
RAM memory: PCI device 10de:01ef (nVidia Corporation) (rev 162).
Bus 0, device 1, function 0:
ISA bridge: PCI device 10de:0060 (nVidia Corporation) (rev 163).
Bus 0, device 1, function 1:
SMBus: PCI device 10de:0064 (nVidia Corporation) (rev 162).
IRQ 11.
Master Capable. No bursts. Min Gnt=3.Max Lat=1.
I/O at 0xe000 [0xe01f].
Bus 0, device 2, function 0:
USB Controller: PCI device 10de:0067 (nVidia Corporation) (rev 163).
IRQ 5.
Master Capable. No bursts. Min Gnt=3.Max Lat=1.
Non-prefetchable 32 bit memory at 0xeb087000 [0xeb087fff].
Bus 0, device 2, function 1:
USB Controller: PCI device 10de:0067 (nVidia Corporation) (rev 163).
IRQ 5.
Master Capable. No bursts. Min Gnt=3.Max Lat=1.
Non-prefetchable 32 bit memory at 0xeb082000 [0xeb082fff].
Bus 0, device 2, function 2:
USB Controller: PCI device 10de:0068 (nVidia Corporation) (rev 163).
IRQ 11.
Master Capable. No bursts. Min Gnt=3.Max Lat=1.
Non-prefetchable 32 bit memory at 0xeb083000 [0xeb0830ff].
Bus 0, device 4, function 0:
Ethernet controller: PCI device 10de:0066 (nVidia Corporation) (rev 161).
IRQ 11.
Master Capable. No bursts. Min Gnt=1.Max Lat=20.
Non-prefetchable 32 bit memory at 0xeb086000 [0xeb086fff].
I/O at 0xe400 [0xe407].
Bus 0, device 5, function 0:
Multimedia audio controller: PCI device 10de:006b (nVidia Corporation) (rev 162).
IRQ 11.
Master Capable. No bursts. Min Gnt=1.Max Lat=12.
Non-prefetchable 32 bit memory at 0xeb000000 [0xeb07ffff].
Bus 0, device 6, function 0:
Multimedia audio controller: PCI device 10de:006a (nVidia Corporation) (rev 161).
IRQ 5.
Master Capable. No bursts. Min Gnt=2.Max Lat=5.
I/O at 0xd000 [0xd0ff].
I/O at 0xd400 [0xd47f].
Non-prefetchable 32 bit memory at 0xeb080000 [0xeb080fff].
Bus 0, device 8, function 0:
PCI bridge: PCI device 10de:006c (nVidia Corporation) (rev 163).
Master Capable. No bursts. Min Gnt=2.
Bus 0, device 9, function 0:
IDE interface: PCI device 10de:0065 (nVidia Corporation) (rev 162).
Master Capable. No bursts. Min Gnt=3.Max Lat=1.
I/O at 0xf000 [0xf00f].
Bus 0, device 12, function 0:
PCI bridge: PCI device 10de:006d (nVidia Corporation) (rev 163).
Master Capable. No bursts. Min Gnt=2.
Bus 0, device 13, function 0:
FireWire (IEEE 1394): PCI device 10de:006e (nVidia Corporation) (rev 163).
IRQ 5.
Master Capable. No bursts. Min Gnt=3.Max Lat=1.
Non-prefetchable 32 bit memory at 0xeb084000 [0xeb0847ff].
Non-prefetchable 32 bit memory at 0xeb085000 [0xeb08503f].
Bus 0, device 30, function 0:
PCI bridge: PCI device 10de:01e8 (nVidia Corporation) (rev 162).
Master Capable. Latency=32. Min Gnt=10.
Bus 1, device 10, function 0:
Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS) (rev 0).
IRQ 5.
I/O at 0xa000 [0xa01f].
Bus 1, device 11, function 0:
RAID bus controller: PCI device 1095:3112 (CMD Technology Inc) (rev 2).
IRQ 11.
Master Capable. Latency=32.
I/O at 0xa400 [0xa407].
I/O at 0xa800 [0xa803].
I/O at 0xac00 [0xac07].
I/O at 0xb000 [0xb003].
I/O at 0xb400 [0xb40f].
Non-prefetchable 32 bit memory at 0xea000000 [0xea0001ff].
Bus 2, device 1, function 0:
Ethernet controller: PCI device 10b7:9201 (3Com Corporation) (rev 64).
IRQ 5.
Master Capable. Latency=32. Min Gnt=10.Max Lat=10.
I/O at 0xc000 [0xc07f].
Non-prefetchable 32 bit memory at 0xe5000000 [0xe500007f].
Bus 3, device 0, function 0:
VGA compatible controller: PCI device 10de:0041 (nVidia Corporation) (rev 161).
IRQ 11.
Master Capable. Latency=32. Min Gnt=5.Max Lat=1.
Non-prefetchable 32 bit memory at 0xe6000000 [0xe6ffffff].
Prefetchable 32 bit memory at 0xc0000000 [0xdfffffff].
Non-prefetchable 32 bit memory at 0xe7000000 [0xe7ffffff].
Unfortunately since so many of the devices are not identified, this isn't as informative as normal.
/proc/bus/usb/devices
List USB devices:
$ cat /proc/bus/usb/devices T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 6 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.40 S: Manufacturer=Linux 2.4.18-3 ehci-hcd S: Product=PCI device 10de:0068 (nVidia Corporation) S: SerialNumber=00:02.2 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl= 12ms T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 3 B: Alloc= 60/900 us ( 7%), #Int= 1, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB OHCI Root Hub S: SerialNumber=f8944000 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 5 Spd=12 MxCh= 2 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0d7e ProdID=2315 Rev= 0.01 S: Manufacturer=ACDC Inc. S: Product=USB Hub C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl= 15ms T: Bus=02 Lev=02 Prnt=05 Port=00 Cnt=01 Dev#= 6 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0d7e ProdID=2317 Rev= 0.01 S: Manufacturer=ACDC Inc. S: Product=USB Mass Storage C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms T: Bus=02 Lev=02 Prnt=05 Port=01 Cnt=02 Dev#= 7 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0d7e ProdID=2316 Rev= 0.01 S: Manufacturer=ACDC Inc. S: Product=Security Device C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 0 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 3 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB OHCI Root Hub S: SerialNumber=f8942000 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
As well as the root hubs, there is a USB drive plugged in that features a "security" device (the ACDC Inc. devices).
dmesg
System message log:
$ dmesg
Linux version 2.4.18-3 (bhcompile@porky.devel.redhat.com) (gcc version 2.96 20000731 (Red Hat Linux 7.3 2.96-110)) #1 Thu Apr 18 07:32:41 EDT 2002
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
1151MB HIGHMEM available.
On node 0 totalpages: 524272
zone(0): 4096 pages.
zone(1): 225280 pages.
zone(2): 294896 pages.
Kernel command line: ro root=/dev/hda2 hdd=ide-scsi
ide_setup: hdd=ide-scsi
Found and enabled local APIC!
Initializing CPU#0
Detected 2162.737 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 4312.26 BogoMIPS
Memory: 2065136k/2097088k available (1125k kernel code, 31564k reserved, 802k data, 296k init, 1179584k highmem)
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Buffer cache hash table entries: 131072 (order: 7, 524288 bytes)
Page-cache hash table entries: 524288 (order: 9, 2097152 bytes)
CPU: Before vendor init, caps: 0383fbff c1c3fbff 00000000, vendor = 2
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After vendor init, caps: 0383fbff c1c3fbff 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: Common caps: 0383fbff c1c3fbff 00000000 00000000
CPU: AMD Athlon(tm) XP 3000+ stepping 00
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfb4a0, last bus=3
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 2: assuming transparent
Unknown bridge resource 2: assuming transparent
Unknown bridge resource 0: assuming transparent
PCI: Using IRQ router default [10de/01e0] at 00:00.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
Starting kswapd
allocated 64 pages and 64 bhs reserved for the highmem bounces
VFS: Diskquotas version dquot_6.5.0 initialized
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
block: 1024 slots per queue, batch=256
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PCI_IDE: unknown IDE controller on PCI bus 00 device 48, VID=10de, DID=0065
PCI_IDE: chipset revision 162
PCI_IDE: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
hda: Maxtor 6Y080L0, ATA DISK drive
hdd: LITE-ON DVDRW SHW-160P6S, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: setmax LBA 160086528, native 160084415
hda: 160084415 sectors (81963 MB) w/2048KiB Cache, CHS=10587/240/63
ide-floppy driver 0.99.newide
Partition check:
hda: hda1 hda2 hda3
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
ide-floppy driver 0.99.newide
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 16384 buckets, 128Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 118k freed
VFS: Mounted root (ext2 filesystem).
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 296k freed
Adding Swap: 2041192k swap-space (priority -1)
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
PCI: Setting latency timer of device 00:02.0 to 64
usb-ohci.c: USB OHCI at membase 0xf8942000, IRQ 5
usb-ohci.c: usb-00:02.0, PCI device 10de:0067 (nVidia Corporation)
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 3 ports detected
PCI: Setting latency timer of device 00:02.1 to 64
usb-ohci.c: USB OHCI at membase 0xf8944000, IRQ 5
usb-ohci.c: usb-00:02.1, PCI device 10de:0067 (nVidia Corporation)
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 3 ports detected
ehci-hcd.c: $Revision: 1.1 $ USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-hcd.c: block sizes: qh 96 qtd 96 itd 160 sitd 64
PCI: Setting latency timer of device 00:02.2 to 64
hcd.c: ehci-hcd @ 00:02.2, PCI device 10de:0068 (nVidia Corporation)
hcd.c: irq 11, pci mem f894c000
usb.c: new USB bus registered, assigned bus number 3
ehci-dbg.c: ehci_start hcs_params 0x102486 dbg=1 cc=2 pcc=4 !ppc ports=6
ehci-dbg.c: 00:02.2: ehci_start portroute 0 0 1 1 1 0
ehci-dbg.c: ehci_start extended capabilities at pci 160
ehci-dbg.c: ehci_start hcc_params 0xa082 caching frame 256/512/1024
ehci-hcd.c: reset 80002 cmd (park)=0 ithresh=8 period=1024 Reset HALT
ehci-hcd.c: init 10000 cmd (park)=0 ithresh=1 period=1024 HALT
ehci-hcd.c: USB 2.0 support enabled, EHCI rev 1. 0
hcd.c: 00:02.2 root hub device address 1
hub.c: USB hub found
hub.c: 6 ports detected
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,2), internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: LITE-ON Model: DVDRW SHW-160P6S Rev: PS0B
Type: CD-ROM ANSI SCSI revision: 02
hdd: DMA disabled
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
ne2k-pci.c:v1.02 10/19/2000 D. Becker/P. Gortmaker
http://www.scyld.com/network/ne2k-pci.html
eth0: RealTek RTL-8029 found at 0xa000, IRQ 5, 00:10:A7:0E:38:A0.
ehci-hub.c: GetStatus port 4 status 0x1803 POWER speed=2 CSC CONNECT
ehci-hub.c: 00:02.2 port 4 high speed
ehci-hub.c: GetStatus port 4 status 0x1005 POWER speed=0 PE CONNECT
hub.c: USB new device connect on bus3/4, assigned device number 2
ehci-q.c: ep 0-out qtd token 00080248 --> status -32
hcd.c: giveback urb f728cdc0 status -32
usb.c: USB device not accepting new address=2 (error=-32)
ehci-hcd.c: 00:02.2: free_config devnum -1
ehci-hub.c: 00:02.2 port 4 high speed
ehci-hub.c: GetStatus port 4 status 0x1005 POWER speed=0 PE CONNECT
hub.c: USB new device connect on bus3/4, assigned device number 3
ehci-q.c: ep 0-out qtd token 00080248 --> status -32
hcd.c: giveback urb f75d3440 status -32
usb.c: USB device not accepting new address=3 (error=-32)
ehci-hcd.c: 00:02.2: free_config devnum -1
ehci-hub.c: GetStatus port 4 status 0x1002 POWER speed=0 CSC
ehci-hub.c: GetStatus port 4 status 0x1803 POWER speed=2 CSC CONNECT
ehci-hub.c: 00:02.2 port 4 high speed
ehci-hub.c: GetStatus port 4 status 0x1005 POWER speed=0 PE CONNECT
hub.c: USB new device connect on bus3/4, assigned device number 4
ehci-q.c: ep 0-out qtd token 00080248 --> status -32
hcd.c: giveback urb f728cdc0 status -32
usb.c: USB device not accepting new address=4 (error=-32)
ehci-hcd.c: 00:02.2: free_config devnum -1
ehci-hub.c: 00:02.2 port 4 high speed
ehci-hub.c: GetStatus port 4 status 0x1005 POWER speed=0 PE CONNECT
hub.c: USB new device connect on bus3/4, assigned device number 5
ehci-q.c: ep 0-out qtd token 00080248 --> status -32
hcd.c: giveback urb f75d3140 status -32
usb.c: USB device not accepting new address=5 (error=-32)
ehci-hcd.c: 00:02.2: free_config devnum -1
ehci-hub.c: GetStatus port 4 status 0x1002 POWER speed=0 CSC
ehci-hub.c: GetStatus port 4 status 0x1803 POWER speed=2 CSC CONNECT
ehci-hub.c: 00:02.2 port 4 full speed, give to companion, 0x1001
ehci-hub.c: GetStatus port 4 status 0x3001 OWNER POWER speed=0 CONNECT
ehci-hcd.c: 00:02.2: free_config devnum 0
hub.c: USB new device connect on bus2/2, assigned device number 2
hub.c: USB hub found
hub.c: 2 ports detected
hub.c: USB new device connect on bus2/2/1, assigned device number 3
usb.c: USB device 3 (vend/prod 0xd7e/0x2317) is not claimed by any active driver.
hub.c: USB new device connect on bus2/2/2, assigned device number 4
usb.c: USB device 4 (vend/prod 0xd7e/0x2316) is not claimed by any active driver.
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
scsi1 : SCSI emulation for USB Mass Storage devices
Vendor: Model: Rev:
Type: Direct-Access ANSI SCSI revision: 02
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 3
USB Mass Storage support registered.
ehci-hub.c: GetStatus port 4 status 0x1002 POWER speed=0 CSC
usb.c: USB disconnect on device 2
usb.c: USB disconnect on device 3
usb.c: USB disconnect on device 4
ehci-hub.c: GetStatus port 4 status 0x1803 POWER speed=2 CSC CONNECT
ehci-hub.c: 00:02.2 port 4 full speed, give to companion, 0x1001
ehci-hub.c: GetStatus port 4 status 0x3001 OWNER POWER speed=0 CONNECT
ehci-hcd.c: 00:02.2: free_config devnum 0
hub.c: USB new device connect on bus2/2, assigned device number 5
hub.c: USB hub found
hub.c: 2 ports detected
hub.c: USB new device connect on bus2/2/1, assigned device number 6
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 6
hub.c: USB new device connect on bus2/2/2, assigned device number 7
usb.c: USB device 7 (vend/prod 0xd7e/0x2316) is not claimed by any active driver.
Attached scsi disk sda at scsi1, channel 0, id 0, lun 0
SCSI device sda: 1015808 512-byte hdwr sectors (520 MB)
sda: sda1
Lots of information about the system and detection of the devices in here...
Unsurprisingly the USB support in this kernel is a bit finicky about devices, with some of the USB messages relating to a USB stick it didn't want to work with.
System Information - Ubuntu 8.04 LTS (Hardy Heron)
Released in 2008 this long term support (LTS) release of Ubuntu uses a Linux 2.6 kernel and provides a LiveCD for testing and installation. For simplicity I'm using the LiveCD get more information.
uname & lsb_release
Operating system release and version information:
$ uname -a Linux ubuntu 2.6.24-19-generic #1 SMP Wed Jun 18 14:43:41 UTC 2008 i686 GNU/Linux
So a "Linux" kernel, on a node named "ubuntu", kernel release "2.6.24-19-generic" (a patched 2.6.24 kernel), version "#1 SMP Wed Jun 18 14:43:41 UTC 2008", machine type "i686", for operating system "GNU/Linux".
$ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 8.04.1 Release: 8.04 Codename: hardy
For a Ubuntu 8.04 LTS (Hardy Heron) distribution.
/proc/cpuinfo
Processor information:
$ cat /proc/cpuinfo processor : 0 vendor_id : AuthenticAMD cpu family : 6 model : 10 model name : AMD Athlon(tm) XP 3000+ stepping : 0 cpu MHz : 2162.828 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow up ts bogomips : 4329.00 clflush size : 32
So the expected AMD Athlon XP 3000+.
/proc/meminfo
Memory information:
$ cat /proc/meminfo MemTotal: 2075736 kB MemFree: 1515848 kB Buffers: 78648 kB Cached: 323148 kB SwapCached: 0 kB Active: 217460 kB Inactive: 300156 kB HighTotal: 1179584 kB HighFree: 733472 kB LowTotal: 896152 kB LowFree: 782376 kB SwapTotal: 999416 kB SwapFree: 999416 kB Dirty: 0 kB Writeback: 0 kB AnonPages: 115820 kB Mapped: 38756 kB Slab: 30060 kB SReclaimable: 22336 kB SUnreclaim: 7724 kB PageTables: 1820 kB NFS_Unstable: 0 kB Bounce: 0 kB CommitLimit: 2037284 kB Committed_AS: 343568 kB VmallocTotal: 114680 kB VmallocUsed: 4932 kB VmallocChunk: 109284 kB
Shows the expected 2 GiB of installed memory.
lspci & /proc/bus/pci/devices
List PCI devices:
$ lspci 00:00.0 Host bridge: nVidia Corporation nForce2 IGP2 (rev a2) 00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1 (rev a2) 00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev a2) 00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev a2) 00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev a2) 00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev a2) 00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a3) 00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2) 00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev a3) 00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev a3) 00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev a3) 00:04.0 Ethernet controller: nVidia Corporation nForce2 Ethernet Controller (rev a1) 00:05.0 Multimedia audio controller: nVidia Corporation nForce Audio Processing Unit (rev a2) 00:06.0 Multimedia audio controller: nVidia Corporation nForce2 AC97 Audio Controler (MCP) (rev a1) 00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge (rev a3) 00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2) 00:0c.0 PCI bridge: nVidia Corporation nForce2 PCI Bridge (rev a3) 00:0d.0 FireWire (IEEE 1394): nVidia Corporation nForce2 FireWire (IEEE 1394) Controller (rev a3) 00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev a2) 01:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS) 01:0b.0 RAID bus controller: Silicon Image, Inc. SiI 3112 [SATALink/SATARaid] Serial ATA Controller (rev 02) 02:01.0 Ethernet controller: 3Com Corporation 3C920B-EMB Integrated Fast Ethernet Controller [Tornado] (rev 40) 03:00.0 VGA compatible controller: nVidia Corporation NV40 [GeForce 6800] (rev a1)
Lots of devices here... the nForce2 devices are integrated on the mainboard chipset, with an additional 10 Mb/s ethernet card in a PCI slots, and an AGP graphics card in the AGP slot. The raw PCI bus devices list hints at the associated drivers:
$ cat /proc/bus/pci/devices 0000 10de01e0 0 e0000008 0 0 0 0 0 0 4000000 0 0 0 0 0 0 agpgart-nvidia 0001 10de01eb 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0002 10de01ee 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0003 10de01ed 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0004 10de01ec 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0005 10de01ef 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0008 10de0060 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0009 10de0064 b e001 0 0 0 0 0 0 20 0 0 0 0 0 0 nForce2_smbus 0010 10de0067 11 eb087000 0 0 0 0 0 0 1000 0 0 0 0 0 0 ohci_hcd 0011 10de0067 12 eb082000 0 0 0 0 0 0 1000 0 0 0 0 0 0 ohci_hcd 0012 10de0068 10 eb083000 0 0 0 0 0 0 100 0 0 0 0 0 0 ehci_hcd 0020 10de0066 10 eb086000 e401 0 0 0 0 0 1000 8 0 0 0 0 0 forcedeth 0028 10de006b b eb000000 0 0 0 0 0 0 80000 0 0 0 0 0 0 0030 10de006a 10 d001 d401 eb080000 0 0 0 0 100 80 1000 0 0 0 0 Intel ICH 0040 10de006c 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0048 10de0065 0 1f0 3f6 170 376 f001 0 0 8 0 8 0 10 0 0 pata_amd 0060 10de006d 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0068 10de006e 12 eb084000 eb085000 0 0 0 0 0 800 40 0 0 0 0 0 ohci1394 00f0 10de01e8 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0150 10ec8029 13 a001 0 0 0 0 0 0 20 0 0 0 0 0 0 ne2k-pci 0158 10953112 14 a401 a801 ac01 b001 b401 ea000000 88000000 8 4 8 4 10 200 80000 sata_sil 0208 10b79201 11 c001 e5000000 0 0 0 0 88100000 80 80 0 0 0 0 20000 3c59x 0300 10de0041 b e6000000 c0000008 e7000000 0 0 0 e8000002 1000000 20000000 1000000 0 0 0 20000
For a more explicit connection between the cards and their drivers use lspci -v, although it has a lot more output.
lsusb
List USB devices:
$ lsusb Bus 003 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000
Although this basic output doesn't indicate what's going on, since there are no additional USB devices plugged into the system, the only devices are the root hubs. Using lsusb -v would give more details.
lshw
A hardware report:
$ sudo lshw
description: Desktop Computer
product: A7N8X
vendor: ASUSTeK Computer INC.
version: REV 1.xx
serial: xxxxxxxxxxx
width: 32 bits
capabilities: smbios-2.2 dmi-2.2 smp
configuration: boot=normal chassis=desktop
*-core
description: Motherboard
product: A7N8X
vendor: ASUSTeK Computer INC.
physical id: 0
version: REV 1.xx
serial: xxxxxxxxxxx
slot: Serial Port 1
*-firmware
description: BIOS
vendor: Phoenix Technologies, LTD
physical id: 0
version: ASUS A7N8X Deluxe ACPI BIOS Rev 1008 (03/29/2004)
size: 64KiB
capacity: 448KiB
capabilities: pci pnp apm upgrade shadowing cdboot bootselect socketedrom edd int13floppy360 int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb agp ls120boot zipboot
*-cpu
description: CPU
product: AMD Athlon(tm) XP 3000+
vendor: Advanced Micro Devices [AMD]
physical id: 4
bus info: cpu@0
version: 6.10.0
slot: Socket A
size: 2166MHz
capacity: 3GHz
width: 32 bits
clock: 166MHz
capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow up ts
*-cache:0
description: L1 cache
physical id: 9
slot: L1 Cache
size: 128KiB
capacity: 128KiB
capabilities: pipeline-burst synchronous internal write-back data
*-cache:1
description: L2 cache
physical id: a
slot: L2 Cache
size: 512KiB
capacity: 512KiB
capabilities: pipeline-burst synchronous external write-back data
*-memory
description: System Memory
physical id: 26
slot: System board or motherboard
size: 2GiB
*-bank:0
description: DIMM DRAM Synchronous [empty]
physical id: 0
slot: DDR1
width: 64 bits
*-bank:1
description: DIMM DRAM Synchronous
physical id: 1
slot: DDR2
size: 1GiB
width: 64 bits
*-bank:2
description: DIMM DRAM Synchronous
physical id: 2
slot: DDR3
size: 1GiB
width: 64 bits
*-pci
description: Host bridge
product: nForce2 IGP2
vendor: nVidia Corporation
physical id: 100
bus info: pci@0000:00:00.0
version: a2
width: 32 bits
clock: 66MHz
configuration: driver=agpgart-nvidia module=nvidia_agp
*-memory:0 UNCLAIMED
description: RAM memory
product: nForce2 Memory Controller 1
vendor: nVidia Corporation
physical id: 0.1
bus info: pci@0000:00:00.1
version: a2
width: 32 bits
clock: 66MHz (15.2ns)
configuration: latency=0
*-memory:1 UNCLAIMED
description: RAM memory
product: nForce2 Memory Controller 4
vendor: nVidia Corporation
physical id: 0.2
bus info: pci@0000:00:00.2
version: a2
width: 32 bits
clock: 66MHz (15.2ns)
configuration: latency=0
*-memory:2 UNCLAIMED
description: RAM memory
product: nForce2 Memory Controller 3
vendor: nVidia Corporation
physical id: 0.3
bus info: pci@0000:00:00.3
version: a2
width: 32 bits
clock: 66MHz (15.2ns)
configuration: latency=0
*-memory:3 UNCLAIMED
description: RAM memory
product: nForce2 Memory Controller 2
vendor: nVidia Corporation
physical id: 0.4
bus info: pci@0000:00:00.4
version: a2
width: 32 bits
clock: 66MHz (15.2ns)
configuration: latency=0
*-memory:4 UNCLAIMED
description: RAM memory
product: nForce2 Memory Controller 5
vendor: nVidia Corporation
physical id: 0.5
bus info: pci@0000:00:00.5
version: a2
width: 32 bits
clock: 66MHz (15.2ns)
configuration: latency=0
*-isa
description: ISA bridge
product: nForce2 ISA Bridge
vendor: nVidia Corporation
physical id: 1
bus info: pci@0000:00:01.0
version: a3
width: 32 bits
clock: 66MHz
capabilities: isa ht bus_master cap_list
configuration: latency=0
*-serial
description: SMBus
product: nForce2 SMBus (MCP)
vendor: nVidia Corporation
physical id: 1.1
bus info: pci@0000:00:01.1
version: a2
width: 32 bits
clock: 66MHz
capabilities: pm cap_list
configuration: driver=nForce2_smbus latency=0 maxlatency=1 mingnt=3 module=i2c_nforce2
*-usb:0
description: USB Controller
product: nForce2 USB Controller
vendor: nVidia Corporation
physical id: 2
bus info: pci@0000:00:02.0
version: a3
width: 32 bits
clock: 66MHz
capabilities: pm ohci bus_master cap_list
configuration: driver=ohci_hcd latency=0 maxlatency=1 mingnt=3 module=ohci_hcd
*-usb:1
description: USB Controller
product: nForce2 USB Controller
vendor: nVidia Corporation
physical id: 2.1
bus info: pci@0000:00:02.1
version: a3
width: 32 bits
clock: 66MHz
capabilities: pm ohci bus_master cap_list
configuration: driver=ohci_hcd latency=0 maxlatency=1 mingnt=3 module=ohci_hcd
*-usb:2
description: USB Controller
product: nForce2 USB Controller
vendor: nVidia Corporation
physical id: 2.2
bus info: pci@0000:00:02.2
version: a3
width: 32 bits
clock: 66MHz
capabilities: debug pm ehci bus_master cap_list
configuration: driver=ehci_hcd latency=0 maxlatency=1 mingnt=3 module=ehci_hcd
*-network
description: Ethernet interface
product: nForce2 Ethernet Controller
vendor: nVidia Corporation
physical id: 4
bus info: pci@0000:00:04.0
logical name: eth0
version: a1
serial: 00:0c:6e:06:31:18
size: 100MB/s
capacity: 100MB/s
width: 32 bits
clock: 66MHz
capabilities: pm bus_master cap_list ethernet physical mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=forcedeth driverversion=0.61 duplex=full ip=192.168.1.140 latency=0 link=yes maxlatency=20 mingnt=1 module=forcedeth multicast=yes port=MII speed=100MB/s
*-multimedia:0 UNCLAIMED
description: Multimedia audio controller
product: nForce Audio Processing Unit
vendor: nVidia Corporation
physical id: 5
bus info: pci@0000:00:05.0
version: a2
width: 32 bits
clock: 66MHz
capabilities: pm bus_master cap_list
configuration: latency=0 maxlatency=12 mingnt=1
*-multimedia:1
description: Multimedia audio controller
product: nForce2 AC97 Audio Controler (MCP)
vendor: nVidia Corporation
physical id: 6
bus info: pci@0000:00:06.0
version: a1
width: 32 bits
clock: 66MHz
capabilities: pm bus_master cap_list
configuration: driver=Intel ICH latency=0 maxlatency=5 mingnt=2 module=snd_intel8x0
*-pci:0
description: PCI bridge
product: nForce2 External PCI Bridge
vendor: nVidia Corporation
physical id: 8
bus info: pci@0000:00:08.0
version: a3
width: 32 bits
clock: 66MHz
capabilities: pci normal_decode bus_master
*-network
description: Ethernet interface
product: RTL-8029(AS)
vendor: Realtek Semiconductor Co., Ltd.
physical id: a
bus info: pci@0000:01:0a.0
logical name: eth1
version: 00
serial: 00:10:a7:0e:38:a0
width: 32 bits
clock: 33MHz
capabilities: ethernet physical
configuration: broadcast=yes driver=ne2k-pci driverversion=1.03 latency=0 module=ne2k_pci multicast=yes
*-storage
description: RAID bus controller
product: SiI 3112 [SATALink/SATARaid] Serial ATA Controller
vendor: Silicon Image, Inc.
physical id: b
bus info: pci@0000:01:0b.0
version: 02
width: 32 bits
clock: 66MHz
capabilities: storage pm bus_master cap_list
configuration: driver=sata_sil latency=32 module=sata_sil
*-ide
description: IDE interface
product: nForce2 IDE
vendor: nVidia Corporation
physical id: 9
bus info: pci@0000:00:09.0
logical name: scsi2
logical name: scsi3
version: a2
width: 32 bits
clock: 66MHz
capabilities: ide pm bus_master cap_list emulated
configuration: driver=pata_amd latency=0 maxlatency=1 mingnt=3 module=pata_amd
*-disk
description: ATA Disk
product: Maxtor 6Y080L0
vendor: Maxtor
physical id: 0.0.0
bus info: scsi@2:0.0.0
logical name: /dev/sda
version: YAR4
serial: Y2VEK20E
size: 76GiB (81GB)
capabilities: partitioned partitioned:dos
configuration: ansiversion=5 signature=9021df6f
*-volume:0
description: EXT3 volume
vendor: Linux
physical id: 1
bus info: scsi@2:0.0.0,1
logical name: /dev/sda1
version: 1.0
serial: 83736664-029b-4caa-ab96-122c9ed260dc
size: 75GiB
capacity: 75GiB
capabilities: primary bootable journaled extended_attributes large_files huge_files recover ext3 ext2 initialized
configuration: created=2022-03-26 14:48:16 filesystem=ext3 lastmountpoint=/ modified=2022-03-27 08:42:06 mounted=2022-03-27 08:42:14 state=clean
*-volume:1
description: Extended partition
physical id: 2
bus info: scsi@2:0.0.0,2
logical name: /dev/sda2
size: 976MiB
capacity: 976MiB
capabilities: primary extended partitioned partitioned:extended
*-logicalvolume
description: Linux swap / Solaris partition
physical id: 5
logical name: /dev/sda5
capacity: 976MiB
capabilities: nofs
*-cdrom
description: DVD writer
product: DVDRW SHW-160P6S
vendor: LITE-ON
physical id: 0.1.0
bus info: scsi@3:0.1.0
logical name: /dev/cdrom
logical name: /dev/dvd
logical name: /dev/scd0
logical name: /dev/sr0
logical name: /cdrom
version: PS0B
capabilities: removable audio cd-r cd-rw dvd dvd-r
configuration: ansiversion=5 mount.fstype=iso9660 mount.options=ro,noatime,relatime state=mounted status=ready
*-medium
physical id: 0
logical name: /dev/cdrom
logical name: /cdrom
configuration: mount.fstype=iso9660 mount.options=ro,noatime,relatime state=mounted
*-pci:1
description: PCI bridge
product: nForce2 PCI Bridge
vendor: nVidia Corporation
physical id: c
bus info: pci@0000:00:0c.0
version: a3
width: 32 bits
clock: 66MHz
capabilities: pci normal_decode bus_master
*-network
description: Ethernet interface
product: 3C920B-EMB Integrated Fast Ethernet Controller [Tornado]
vendor: 3Com Corporation
physical id: 1
bus info: pci@0000:02:01.0
logical name: eth2
version: 40
serial: 00:e0:18:f1:e6:3b
size: 10MB/s
capacity: 100MB/s
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=3c59x duplex=half latency=32 link=no maxlatency=10 mingnt=10 module=3c59x multicast=yes port=MII speed=10MB/s
*-firewire
description: FireWire (IEEE 1394)
product: nForce2 FireWire (IEEE 1394) Controller
vendor: nVidia Corporation
physical id: d
bus info: pci@0000:00:0d.0
version: a3
width: 32 bits
clock: 66MHz
capabilities: pm ohci bus_master cap_list
configuration: driver=ohci1394 latency=0 maxlatency=1 mingnt=3 module=ohci1394
*-pci:2
description: PCI bridge
product: nForce2 AGP
vendor: nVidia Corporation
physical id: 1e
bus info: pci@0000:00:1e.0
version: a2
width: 32 bits
clock: 66MHz
capabilities: pci normal_decode bus_master
*-display UNCLAIMED
description: VGA compatible controller
product: NV40 [GeForce 6800]
vendor: nVidia Corporation
physical id: 0
bus info: pci@0000:03:00.0
version: a1
width: 32 bits
clock: 66MHz
capabilities: pm agp agp-3.0 vga_controller bus_master cap_list
configuration: latency=32 maxlatency=1 mingnt=5
Lots of detail here that's helpful for diagnosing issues, which is likely why it is included on the installation LiveCD.
dmesg
System message log:
$ dmesg [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.24-19-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed Jun 18 14:43:41 UTC 2008 (Ubuntu 2.6.24-19.34-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fff0000 (usable) [ 0.000000] BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] 1151MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 524272) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 524272 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 524272 [ 0.000000] On node 0 totalpages: 524272 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2303 pages used for memmap [ 0.000000] HighMem zone: 292593 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.2 present. [ 0.000000] ACPI: RSDP signature @ 0xC00F6D60 checksum 0 [ 0.000000] ACPI: RSDP 000F6D60, 0014 (r0 Nvidia) [ 0.000000] ACPI: RSDT 7FFF3000, 002C (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: FACP 7FFF3040, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: DSDT 7FFF30C0, 43F8 (r1 NVIDIA AWRDACPI 1000 MSFT 100000E) [ 0.000000] ACPI: FACS 7FFF0000, 0040 [ 0.000000] ACPI: APIC 7FFF74C0, 005A (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:10 APIC version 16 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520177 [ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash -- console-setup/layoutcode=gb [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 2162.828 MHz processor. [ 53.251316] Console: colour VGA+ 80x25 [ 53.251320] console [tty0] enabled [ 53.251882] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 53.252352] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 53.344608] Memory: 2066936k/2097088k available (2177k kernel code, 29012k reserved, 1006k data, 368k init, 1179584k highmem) [ 53.344616] virtual kernel memory layout: [ 53.344617] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 53.344618] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 53.344620] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 53.344621] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 53.344622] .init : 0xc0421000 - 0xc047d000 ( 368 kB) [ 53.344623] .data : 0xc0320434 - 0xc041bdc4 (1006 kB) [ 53.344624] .text : 0xc0100000 - 0xc0320434 (2177 kB) [ 53.344627] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 53.344673] SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 53.424621] Calibrating delay using timer specific routine.. 4329.00 BogoMIPS (lpj=8658001) [ 53.424655] Security Framework initialized [ 53.424662] SELinux: Disabled at boot. [ 53.424682] AppArmor: AppArmor initialized [ 53.424686] Failure registering capabilities with primary security module. [ 53.424696] Mount-cache hash table entries: 512 [ 53.424838] Initializing cgroup subsys ns [ 53.424843] Initializing cgroup subsys cpuacct [ 53.424854] CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000 00000000 [ 53.424863] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 53.424865] CPU: L2 Cache: 512K (64 bytes/line) [ 53.424868] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000 00000000 [ 53.424879] Compat vDSO mapped to ffffe000. [ 53.424892] Checking 'hlt' instruction... OK. [ 53.440847] SMP alternatives: switching to UP code [ 53.441913] Freeing SMP alternatives: 11k freed [ 53.442032] Early unpacking initramfs... done [ 53.755558] ACPI: Core revision 20070126 [ 53.755640] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 53.758155] CPU0: AMD Athlon(tm) XP 3000+ stepping 00 [ 53.758178] Total of 1 processors activated (4329.00 BogoMIPS). [ 53.758376] ENABLING IO-APIC IRQs [ 53.758576] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 53.900173] APIC calibration not consistent with PM Timer: 96ms instead of 100ms [ 53.900175] APIC delta adjusted to PM-Timer: 2079546 (1996470) [ 53.900245] Brought up 1 CPUs [ 53.900275] CPU0 attaching sched-domain: [ 53.900277] domain 0: span 01 [ 53.900279] groups: 01 [ 53.900474] net_namespace: 64 bytes [ 53.900482] Booting paravirtualized kernel on bare hardware [ 53.900923] Time: 14:39:26 Date: 03/29/22 [ 53.900952] NET: Registered protocol family 16 [ 53.901164] EISA bus registered [ 53.901191] ACPI: bus type pci registered [ 53.933395] PCI: PCI BIOS revision 2.10 entry at 0xfb4a0, last bus=3 [ 53.933397] PCI: Using configuration type 1 [ 53.933406] Setting up standard PCI resources [ 53.938004] ACPI: EC: Look up EC in DSDT [ 53.942218] ACPI: Interpreter enabled [ 53.942221] ACPI: (supports S0 S1 S4 S5) [ 53.942234] ACPI: Using IOAPIC for interrupt routing [ 53.949824] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 53.949900] PCI: nForce2 C1 Halt Disconnect fixup [ 53.950932] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 53.951073] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 53.951264] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] [ 53.951357] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB1._PRT] [ 53.997389] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 53.997517] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 53.997645] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 53.997770] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 53.997895] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 53.998021] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 53.998146] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 53.998271] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 53.998397] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 53.998522] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 53.998647] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 53.998773] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 53.998898] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 53.999028] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 53.999154] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 53.999282] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 53.999394] ACPI: PCI Interrupt Link [APC1] (IRQs *16) [ 53.999492] ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled. [ 53.999589] ACPI: PCI Interrupt Link [APC3] (IRQs *18) [ 53.999686] ACPI: PCI Interrupt Link [APC4] (IRQs *19) [ 53.999782] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. [ 53.999925] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0 [ 54.000067] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0 [ 54.000214] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0 [ 54.000355] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0 [ 54.000496] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0 [ 54.000635] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled. [ 54.000735] ACPI: PCI Interrupt Link [APCS] (IRQs *23) [ 54.000874] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0 [ 54.001014] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0 [ 54.001157] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0 [ 54.001297] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled. [ 54.001424] Linux Plug and Play Support v0.97 (c) Adam Belay [ 54.001457] pnp: PnP ACPI init [ 54.001465] ACPI: bus type pnp registered [ 54.005936] pnp: PnP ACPI: found 17 devices [ 54.005938] ACPI: ACPI bus type pnp unregistered [ 54.005942] PnPBIOS: Disabled by ACPI PNP [ 54.006183] PCI: Using ACPI for IRQ routing [ 54.006188] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 54.084016] NET: Registered protocol family 8 [ 54.084018] NET: Registered protocol family 20 [ 54.084098] AppArmor: AppArmor Filesystem Enabled [ 54.088003] Time: tsc clocksource has been installed. [ 54.096031] system 00:00: ioport range 0x4000-0x407f has been reserved [ 54.096034] system 00:00: ioport range 0x4080-0x40ff has been reserved [ 54.096037] system 00:00: ioport range 0x4400-0x447f has been reserved [ 54.096039] system 00:00: ioport range 0x4480-0x44ff has been reserved [ 54.096042] system 00:00: ioport range 0x4200-0x427f has been reserved [ 54.096044] system 00:00: ioport range 0x4280-0x42ff has been reserved [ 54.096049] system 00:01: ioport range 0x5000-0x503f has been reserved [ 54.096052] system 00:01: ioport range 0x5500-0x553f has been reserved [ 54.096058] system 00:02: iomem range 0xd2800-0xd3fff has been reserved [ 54.096061] system 00:02: iomem range 0xf0000-0xf7fff could not be reserved [ 54.096064] system 00:02: iomem range 0xf8000-0xfbfff could not be reserved [ 54.096066] system 00:02: iomem range 0xfc000-0xfffff could not be reserved [ 54.096069] system 00:02: iomem range 0x7fff0000-0x7fffffff could not be reserved [ 54.096072] system 00:02: iomem range 0xffff0000-0xffffffff could not be reserved [ 54.096075] system 00:02: iomem range 0x0-0x9ffff could not be reserved [ 54.096077] system 00:02: iomem range 0x100000-0x7ffeffff could not be reserved [ 54.096080] system 00:02: iomem range 0xfec00000-0xfec00fff could not be reserved [ 54.096083] system 00:02: iomem range 0xfee00000-0xfee00fff could not be reserved [ 54.096088] system 00:04: ioport range 0x4d0-0x4d1 has been reserved [ 54.126485] PCI: Bridge: 0000:00:08.0 [ 54.126488] IO window: a000-bfff [ 54.126493] MEM window: e9000000-eaffffff [ 54.126497] PREFETCH window: 88000000-880fffff [ 54.126502] PCI: Bridge: 0000:00:0c.0 [ 54.126504] IO window: c000-cfff [ 54.126508] MEM window: e4000000-e5ffffff [ 54.126512] PREFETCH window: 88100000-881fffff [ 54.126517] PCI: Bridge: 0000:00:1e.0 [ 54.126518] IO window: disabled. [ 54.126522] MEM window: e6000000-e8ffffff [ 54.126525] PREFETCH window: c0000000-dfffffff [ 54.126536] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 54.126542] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 54.126556] NET: Registered protocol family 2 [ 54.164017] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 54.164361] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 54.165792] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 54.166524] TCP: Hash tables configured (established 131072 bind 65536) [ 54.166527] TCP reno registered [ 54.176071] checking if image is initramfs... it is [ 54.627472] Switched to high resolution mode on CPU 0 [ 54.768159] Freeing initrd memory: 7667k freed [ 54.768865] audit: initializing netlink socket (disabled) [ 54.768881] audit(1648564767.324:1): initialized [ 54.769068] highmem bounce pool size: 64 pages [ 54.770939] VFS: Disk quotas dquot_6.5.1 [ 54.771012] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 54.771141] io scheduler noop registered [ 54.771144] io scheduler anticipatory registered [ 54.771146] io scheduler deadline registered [ 54.771156] io scheduler cfq registered (default) [ 54.771330] Boot video device is 0000:03:00.0 [ 54.771633] isapnp: Scanning for PnP cards... [ 55.125791] isapnp: No Plug & Play device found [ 55.154004] Real Time Clock Driver v1.12ac [ 55.154121] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 55.154255] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 55.154397] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 55.154997] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 55.155547] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 55.156336] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 55.156404] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 55.156504] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 55.159174] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 55.159179] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 55.166986] mice: PS/2 mouse device common for all mice [ 55.167098] EISA: Probing bus 0 at eisa.0 [ 55.167118] Cannot allocate resource for EISA slot 4 [ 55.167121] Cannot allocate resource for EISA slot 5 [ 55.167136] EISA: Detected 0 cards. [ 55.167139] cpuidle: using governor ladder [ 55.167141] cpuidle: using governor menu [ 55.167274] NET: Registered protocol family 1 [ 55.167301] Using IPI No-Shortcut mode [ 55.167332] registered taskstats version 1 [ 55.167445] Magic number: 14:777:688 [ 55.167616] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 55.167618] EDD information not available. [ 55.168013] Freeing unused kernel memory: 368k freed [ 55.198885] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 56.379173] fuse init (API version 7.9) [ 57.276868] usbcore: registered new interface driver usbfs [ 57.276894] usbcore: registered new interface driver hub [ 57.292807] usbcore: registered new device driver usb [ 57.302152] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. [ 57.302447] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22 [ 57.302455] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCH] -> GSI 22 (level, high) -> IRQ 16 [ 57.302463] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 57.312790] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 57.366760] SCSI subsystem initialized [ 57.426294] libata version 3.00 loaded. [ 57.435484] ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker [ 57.580074] Floppy drive(s): fd0 is 1.44M [ 57.600311] FDC 0 is a post-1991 82077 [ 57.820615] forcedeth 0000:00:04.0: ifname eth0, PHY OUI 0x20 @ 1, addr 00:0c:6e:06:31:18 [ 57.820621] forcedeth 0000:00:04.0: timirq lnktim desc-v1 [ 57.821041] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21 [ 57.821050] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 21 (level, high) -> IRQ 17 [ 57.821066] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 57.821070] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 57.821353] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [ 57.821371] ohci_hcd 0000:00:02.0: irq 17, io mem 0xeb087000 [ 57.878317] usb usb1: configuration #1 chosen from 1 choice [ 57.878349] hub 1-0:1.0: USB hub found [ 57.878358] hub 1-0:1.0: 3 ports detected [ 57.980434] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 20 [ 57.980444] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 20 (level, high) -> IRQ 18 [ 57.980462] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 57.980466] ohci_hcd 0000:00:02.1: OHCI Host Controller [ 57.980491] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 [ 57.980510] ohci_hcd 0000:00:02.1: irq 18, io mem 0xeb082000 [ 58.038150] usb usb2: configuration #1 chosen from 1 choice [ 58.038177] hub 2-0:1.0: USB hub found [ 58.038186] hub 2-0:1.0: 3 ports detected [ 58.140386] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 [ 58.140392] ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 22 (level, high) -> IRQ 16 [ 58.140405] PCI: Setting latency timer of device 0000:00:02.2 to 64 [ 58.140409] ehci_hcd 0000:00:02.2: EHCI Host Controller [ 58.140434] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3 [ 58.140465] ehci_hcd 0000:00:02.2: selective suspend/wakeup unavailable [ 58.140472] ehci_hcd 0000:00:02.2: debug port 1 [ 58.140477] PCI: cache line size of 64 is not supported by device 0000:00:02.2 [ 58.140488] ehci_hcd 0000:00:02.2: irq 16, io mem 0xeb083000 [ 58.151907] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 58.152041] usb usb3: configuration #1 chosen from 1 choice [ 58.152066] hub 3-0:1.0: USB hub found [ 58.152074] hub 3-0:1.0: 6 ports detected [ 58.256385] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 [ 58.256395] ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [APC1] -> GSI 16 (level, high) -> IRQ 19 [ 58.256747] eth1: RealTek RTL-8029 found at 0xa000, IRQ 19, 00:10:a7:0e:38:a0. [ 58.257054] ACPI: PCI Interrupt Link [AP3C] enabled at IRQ 21 [ 58.257056] ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [AP3C] -> GSI 21 (level, high) -> IRQ 17 [ 58.257063] 3c59x: Donald Becker and others. [ 58.257068] 0000:02:01.0: 3Com PCI 3c920 Tornado at f883c000. [ 58.283553] sata_sil 0000:01:0b.0: version 2.3 [ 58.283820] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 [ 58.283828] ACPI: PCI Interrupt 0000:01:0b.0[A] -> Link [APC3] -> GSI 18 (level, high) -> IRQ 20 [ 58.284871] scsi0 : sata_sil [ 58.285243] scsi1 : sata_sil [ 58.285275] ata1: SATA max UDMA/100 mmio m512@0xea000000 tf 0xea000080 irq 20 [ 58.285279] ata2: SATA max UDMA/100 mmio m512@0xea000000 tf 0xea0000c0 irq 20 [ 58.323707] end_request: I/O error, dev fd0, sector 0 [ 58.595425] ata1: SATA link down (SStatus 0 SControl 310) [ 58.907104] ata2: SATA link down (SStatus 0 SControl 310) [ 58.907545] ACPI: PCI Interrupt Link [APCM] enabled at IRQ 20 [ 58.907549] ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [APCM] -> GSI 20 (level, high) -> IRQ 18 [ 58.907556] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 58.959297] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[eb084000-eb0847ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 58.966543] PCI: Setting latency timer of device 0000:00:09.0 to 64 [ 58.970032] pata_amd 0000:00:09.0: version 0.3.10 [ 58.970099] PCI: Setting latency timer of device 0000:00:09.0 to 64 [ 58.970907] scsi2 : pata_amd [ 58.971261] scsi3 : pata_amd [ 58.971896] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 58.971899] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 59.159158] ata3.00: HPA unlocked: 160084415 -> 160086528, native 160086528 [ 59.159165] ata3.00: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133 [ 59.159168] ata3.00: 160086528 sectors, multi 16: LBA [ 59.175227] ata3.00: configured for UDMA/133 [ 59.358654] end_request: I/O error, dev fd0, sector 0 [ 59.698632] ata4.01: ATAPI: LITE-ON DVDRW SHW-160P6S, PS0B, max UDMA/66 [ 59.698646] ata4.01: limited to UDMA/33 due to 40-wire cable [ 59.886350] ata4.01: configured for UDMA/33 [ 59.886476] scsi 2:0:0:0: Direct-Access ATA Maxtor 6Y080L0 YAR4 PQ: 0 ANSI: 5 [ 59.887671] scsi 3:0:1:0: CD-ROM LITE-ON DVDRW SHW-160P6S PS0B PQ: 0 ANSI: 5 [ 59.896460] Driver 'sd' needs updating - please use bus_type methods [ 59.897352] sd 2:0:0:0: [sda] 160086528 512-byte hardware sectors (81964 MB) [ 59.897367] sd 2:0:0:0: [sda] Write Protect is off [ 59.897370] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 59.897388] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 59.897437] sd 2:0:0:0: [sda] 160086528 512-byte hardware sectors (81964 MB) [ 59.897447] sd 2:0:0:0: [sda] Write Protect is off [ 59.897449] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 59.897465] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 59.897469] sda:<4>Driver 'sr' needs updating - please use bus_type methods [ 59.916407] sda1 sda2 < sda5 > [ 59.935199] sd 2:0:0:0: [sda] Attached SCSI disk [ 59.941470] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 59.941489] sr 3:0:1:0: Attached scsi generic sg1 type 5 [ 59.943772] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 59.943779] Uniform CD-ROM driver Revision: 3.20 [ 59.943842] sr 3:0:1:0: Attached scsi CD-ROM sr0 [ 60.393602] end_request: I/O error, dev fd0, sector 0 [ 61.007363] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 61.023661] ISO 9660 Extensions: RRIP_1991A [ 61.272817] Registering unionfs 1.4 [ 61.272822] unionfs: debugging is not enabled [ 61.282923] loop: module loaded [ 61.577502] squashfs: version 3.3 (2007/10/31) Phillip Lougher [ 104.318279] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 104.574544] IBM TrackPoint firmware: 0x0b, buttons: 3/3 [ 104.587396] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input3 [ 104.705647] Linux agpgart interface v0.102 [ 104.882605] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 105.210525] agpgart: Detected NVIDIA nForce2 chipset [ 105.214654] agpgart: AGP aperture is 64M @ 0xe0000000 [ 105.517780] input: Power Button (FF) as /devices/virtual/input/input4 [ 105.543710] ACPI: Power Button (FF) [PWRF] [ 105.543774] input: Power Button (CM) as /devices/virtual/input/input5 [ 105.571688] ACPI: Power Button (CM) [PWRB] [ 105.599722] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 105.663660] parport_pc 00:0c: reported by Plug and Play ACPI [ 105.663722] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 105.690071] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x5000 [ 105.690089] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x5500 [ 106.449556] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22 [ 106.449562] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 22 (level, high) -> IRQ 16 [ 106.449590] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 106.770424] intel8x0_measure_ac97_clock: measured 52783 usecs [ 106.770430] intel8x0: clocking to 48000 [ 110.998884] Adding 999416k swap on /dev/sda5. Priority:-1 extents:1 across:999416k [ 111.542369] ip_tables: (C) 2000-2006 Netfilter Core Team [ 113.226116] No dock devices found. [ 117.349087] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) [ 117.349094] apm: overridden by ACPI. [ 117.461765] lp0: using parport0 (interrupt-driven). [ 117.505364] ppdev: user-space parallel port driver [ 122.696561] eth2: setting half-duplex. [ 122.967110] Bluetooth: Core ver 2.11 [ 122.972436] NET: Registered protocol family 31 [ 122.972442] Bluetooth: HCI device and connection manager initialized [ 122.972447] Bluetooth: HCI socket layer initialized [ 123.021942] Bluetooth: L2CAP ver 2.9 [ 123.021948] Bluetooth: L2CAP socket layer initialized [ 123.150164] Bluetooth: RFCOMM socket layer initialized [ 123.150185] Bluetooth: RFCOMM TTY layer initialized [ 123.150187] Bluetooth: RFCOMM ver 1.8 [ 126.470798] NET: Registered protocol family 17 [ 133.344071] NET: Registered protocol family 10 [ 133.344291] lo: Disabled Privacy Extensions [ 133.345384] ADDRCONF(NETDEV_UP): eth2: link is not ready [ 143.948600] eth1: no IPv6 routers present
Lots of information about the system and detection of the devices in here...
System Information - Ubuntu 14.04 LTS (Trusty Tahr)
Released in 2014 this long term support (LTS) release of Ubuntu uses a Linux 3.19.0 kernel and provides a LiveCD for testing and installation. For simplicity I'm using the LiveCD get more information.
uname & lsb_release
Operating system release and version information:
$ uname -a Linux ubuntu 3.19.0-25-generic #26~14.04.1-Ubuntu SMP Fri Jul 24 21:18:00 UTC 2015 i686 athlon i686 GNU/Linux
So a "Linux" kernel, on a node named "ubuntu", kernel release "3.19.0-25-generic" (a patched 2.6.24 kernel), version "#26~14.04.1-Ubuntu SMP Fri Jul 24 21:18:00 UTC 2015", machine type "i686", for operating system "GNU/Linux".
$ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 14.04.3 LTS Release: 14.04 Codename: trusty
For a Ubuntu 14.04 LTS (Trusty Tahr) distribution.
lscpu & /proc/cpuinfo
Processor information:
$ lscpu Architecture: i686 CPU op-mode(s): 32-bit Byte Order: Little Endian CPU(s): 1 On-line CPU(s) list: 0 Thread(s) per core: 1 Core(s) per socket: 1 Socket(s): 1 Vendor ID: AuthenticAMD CPU family: 6 Model: 10 Stepping: 0 CPU MHz: 2171.000 BogoMIPS: 4377.93 L1d cache: 64K L1i cache: 64K L2 cache: 512K
This seems oddly truncated, with the CPU identification string not being reported.
$ cat /proc/cpuinfo processor : 0 vendor_id : AuthenticAMD cpu family : 6 model : 10 model name : AMD Athlon(tm) XP 3000+ stepping : 0 cpu MHz : 2171.000 cache size : 512 KB physical id : 0 siblings : 1 core id : 0 cpu cores : 1 apicid : 0 initial apicid : 0 fdiv_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow vmmcall bugs : fxsave_leak bogomips : 4377.93 clflush size : 32 cache_alignment : 32 address sizes : 34 bits physical, 32 bits virtual power management: ts
So the expected AMD Athlon XP 3000+.
/proc/meminfo
Memory information:
$ cat /proc/meminfo MemTotal: 2063628 kB MemFree: 959872 kB MemAvailable: 1537924 kB Buffers: 146780 kB Cached: 602436 kB SwapCached: 0 kB Active: 584740 kB Inactive: 443768 kB Active(anon): 315876 kB Inactive(anon): 7772 kB Active(file): 268864 kB Inactive(file): 435996 kB Unevictable: 0 kB Mlocked: 0 kB HighTotal: 1183688 kB HighFree: 630892 kB LowTotal: 879940 kB LowFree: 328980 kB SwapTotal: 999420 kB SwapFree: 999420 kB Dirty: 0 kB Writeback: 0 kB AnonPages: 279364 kB Mapped: 144000 kB Shmem: 44292 kB Slab: 38244 kB SReclaimable: 26124 kB SUnreclaim: 12120 kB KernelStack: 2544 kB PageTables: 6152 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 2031232 kB Committed_AS: 2342660 kB VmallocTotal: 122880 kB VmallocUsed: 60608 kB VmallocChunk: 59824 kB AnonHugePages: 75776 kB CmaTotal: 0 kB CmaFree: 0 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB DirectMap4k: 49144 kB DirectMap2M: 864256 kB
Shows the expected 2 GiB of installed memory.
lspci & /proc/bus/pci/devices
List PCI devices:
$ lspci 00:00.0 Host bridge: NVIDIA Corporation nForce2 IGP2 (rev a2) 00:00.1 RAM memory: NVIDIA Corporation nForce2 Memory Controller 1 (rev a2) 00:00.2 RAM memory: NVIDIA Corporation nForce2 Memory Controller 4 (rev a2) 00:00.3 RAM memory: NVIDIA Corporation nForce2 Memory Controller 3 (rev a2) 00:00.4 RAM memory: NVIDIA Corporation nForce2 Memory Controller 2 (rev a2) 00:00.5 RAM memory: NVIDIA Corporation nForce2 Memory Controller 5 (rev a2) 00:01.0 ISA bridge: NVIDIA Corporation nForce2 ISA Bridge (rev a3) 00:01.1 SMBus: NVIDIA Corporation nForce2 SMBus (MCP) (rev a2) 00:02.0 USB controller: NVIDIA Corporation nForce2 USB Controller (rev a3) 00:02.1 USB controller: NVIDIA Corporation nForce2 USB Controller (rev a3) 00:02.2 USB controller: NVIDIA Corporation nForce2 USB Controller (rev a3) 00:04.0 Ethernet controller: NVIDIA Corporation nForce2 Ethernet Controller (rev a1) 00:05.0 Multimedia audio controller: NVIDIA Corporation nForce Audio Processing Unit (rev a2) 00:06.0 Multimedia audio controller: NVIDIA Corporation nForce2 AC97 Audio Controler (MCP) (rev a1) 00:08.0 PCI bridge: NVIDIA Corporation nForce2 External PCI Bridge (rev a3) 00:09.0 IDE interface: NVIDIA Corporation nForce2 IDE (rev a2) 00:0c.0 PCI bridge: NVIDIA Corporation nForce2 PCI Bridge (rev a3) 00:0d.0 FireWire (IEEE 1394): NVIDIA Corporation nForce2 FireWire (IEEE 1394) Controller (rev a3) 00:1e.0 PCI bridge: NVIDIA Corporation nForce2 AGP (rev a2) 01:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS) 01:0b.0 RAID bus controller: Silicon Image, Inc. SiI 3112 [SATALink/SATARaid] Serial ATA Controller (rev 02) 02:01.0 Ethernet controller: 3Com Corporation 3C920B-EMB Integrated Fast Ethernet Controller [Tornado] (rev 40) 03:00.0 VGA compatible controller: NVIDIA Corporation NV40 [GeForce 6800] (rev a1)
Lots of devices here... the nForce2 devices are integrated on the mainboard chipset, with an additional 10 Mb/s ethernet card in a PCI slots, and an AGP graphics card in the AGP slot. The raw PCI bus devices list hints at the associated drivers:
$ cat /proc/bus/pci/devices 0000 10de01e0 0 e0000008 0 0 0 0 0 0 4000000 0 0 0 0 0 0 agpgart-nvidia 0001 10de01eb 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0002 10de01ee 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0003 10de01ed 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0004 10de01ec 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0005 10de01ef 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0008 10de0060 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0009 10de0064 b e001 0 0 0 0 0 0 20 0 0 0 0 0 0 nForce2_smbus 0010 10de0067 16 eb087000 0 0 0 0 0 0 1000 0 0 0 0 0 0 ohci-pci 0011 10de0067 15 eb082000 0 0 0 0 0 0 1000 0 0 0 0 0 0 ohci-pci 0012 10de0068 14 eb083000 0 0 0 0 0 0 100 0 0 0 0 0 0 ehci-pci 0020 10de0066 16 eb086000 e401 0 0 0 0 0 1000 8 0 0 0 0 0 forcedeth 0028 10de006b b eb000000 0 0 0 0 0 0 80000 0 0 0 0 0 0 0030 10de006a 16 d001 d401 eb080000 0 0 0 0 100 80 1000 0 0 0 0 snd_intel8x0 0040 10de006c 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0048 10de0065 0 1f0 3f6 170 376 f001 0 0 8 0 8 0 10 0 0 pata_amd 0060 10de006d 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0068 10de006e 14 eb084000 eb085000 0 0 0 0 0 800 40 0 0 0 0 0 firewire_ohci 00f0 10de01e8 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0150 10ec8029 10 a001 0 0 0 0 0 0 20 0 0 0 0 0 0 ne2k-pci 0158 10953112 12 a401 a801 ac01 b001 b401 ea000000 80000000 8 4 8 4 10 200 80000 sata_sil 0208 10b79201 15 c001 e5000000 0 0 0 0 80100000 80 80 0 0 0 0 20000 3c59x 0300 10de0041 13 e6000000 c0000008 e7000000 0 0 0 e8000002 1000000 20000000 1000000 0 0 0 20000 nouveau
For a more explicit connection between the cards and their drivers use lspci -v, although it has a lot more output.
lsusb
List USB devices:
$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Since there are no additional USB devices plugged into the system, the only devices are the root hubs. Using lsusb -v would give more details.
lshw
A hardware report:
$ sudo lshw
description: Desktop Computer
product: A7N8X
vendor: ASUSTeK Computer INC.
version: REV 1.xx
serial: xxxxxxxxxxx
width: 32 bits
capabilities: smbios-2.2 dmi-2.2 smp
configuration: boot=normal chassis=desktop
*-core
description: Motherboard
product: A7N8X
vendor: ASUSTeK Computer INC.
physical id: 0
version: REV 1.xx
serial: xxxxxxxxxxx
*-firmware
description: BIOS
vendor: Phoenix Technologies, LTD
physical id: 0
version: ASUS A7N8X Deluxe ACPI BIOS Rev 1008
date: 03/29/2004
size: 64KiB
capacity: 448KiB
capabilities: pci pnp apm upgrade shadowing cdboot bootselect socketedrom edd int13floppy360 int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb agp ls120boot zipboot virtualmachine
*-cpu
description: CPU
product: AMD Athlon(tm) XP 3000+
vendor: Advanced Micro Devices [AMD]
physical id: 4
bus info: cpu@0
version: 6.10.0
slot: Socket A
size: 2171MHz
capacity: 3GHz
width: 32 bits
clock: 166MHz
capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow vmmcall cpufreq
*-cache:0
description: L1 cache
physical id: 9
slot: L1 Cache
size: 128KiB
capacity: 128KiB
capabilities: pipeline-burst synchronous internal write-back data
*-cache:1
description: L2 cache
physical id: a
slot: L2 Cache
size: 512KiB
capacity: 512KiB
capabilities: pipeline-burst synchronous external write-back data
*-memory
description: System Memory
physical id: 26
slot: System board or motherboard
size: 2GiB
*-bank:0
description: DIMM DRAM Synchronous [empty]
physical id: 0
slot: DDR1
width: 64 bits
*-bank:1
description: DIMM DRAM Synchronous
physical id: 1
slot: DDR2
size: 1GiB
width: 64 bits
*-bank:2
description: DIMM DRAM Synchronous
physical id: 2
slot: DDR3
size: 1GiB
width: 64 bits
*-pci
description: Host bridge
product: nForce2 IGP2
vendor: NVIDIA Corporation
physical id: 100
bus info: pci@0000:00:00.0
version: a2
width: 32 bits
clock: 66MHz
configuration: driver=agpgart-nvidia
resources: irq:0 memory:e0000000-e3ffffff
*-memory:0 UNCLAIMED
description: RAM memory
product: nForce2 Memory Controller 1
vendor: NVIDIA Corporation
physical id: 0.1
bus info: pci@0000:00:00.1
version: a2
width: 32 bits
clock: 66MHz (15.2ns)
configuration: latency=0
*-memory:1 UNCLAIMED
description: RAM memory
product: nForce2 Memory Controller 4
vendor: NVIDIA Corporation
physical id: 0.2
bus info: pci@0000:00:00.2
version: a2
width: 32 bits
clock: 66MHz (15.2ns)
configuration: latency=0
*-memory:2 UNCLAIMED
description: RAM memory
product: nForce2 Memory Controller 3
vendor: NVIDIA Corporation
physical id: 0.3
bus info: pci@0000:00:00.3
version: a2
width: 32 bits
clock: 66MHz (15.2ns)
configuration: latency=0
*-memory:3 UNCLAIMED
description: RAM memory
product: nForce2 Memory Controller 2
vendor: NVIDIA Corporation
physical id: 0.4
bus info: pci@0000:00:00.4
version: a2
width: 32 bits
clock: 66MHz (15.2ns)
configuration: latency=0
*-memory:4 UNCLAIMED
description: RAM memory
product: nForce2 Memory Controller 5
vendor: NVIDIA Corporation
physical id: 0.5
bus info: pci@0000:00:00.5
version: a2
width: 32 bits
clock: 66MHz (15.2ns)
configuration: latency=0
*-isa
description: ISA bridge
product: nForce2 ISA Bridge
vendor: NVIDIA Corporation
physical id: 1
bus info: pci@0000:00:01.0
version: a3
width: 32 bits
clock: 66MHz
capabilities: isa ht bus_master cap_list
configuration: latency=0
*-serial
description: SMBus
product: nForce2 SMBus (MCP)
vendor: NVIDIA Corporation
physical id: 1.1
bus info: pci@0000:00:01.1
version: a2
width: 32 bits
clock: 66MHz
capabilities: pm cap_list
configuration: driver=nForce2_smbus latency=0 maxlatency=1 mingnt=3
resources: irq:11 ioport:e000(size=32)
*-usb:0
description: USB controller
product: nForce2 USB Controller
vendor: NVIDIA Corporation
physical id: 2
bus info: pci@0000:00:02.0
version: a3
width: 32 bits
clock: 66MHz
capabilities: pm ohci bus_master cap_list
configuration: driver=ohci-pci latency=0 maxlatency=1 mingnt=3
resources: irq:22 memory:eb087000-eb087fff
*-usb:1
description: USB controller
product: nForce2 USB Controller
vendor: NVIDIA Corporation
physical id: 2.1
bus info: pci@0000:00:02.1
version: a3
width: 32 bits
clock: 66MHz
capabilities: pm ohci bus_master cap_list
configuration: driver=ohci-pci latency=0 maxlatency=1 mingnt=3
resources: irq:21 memory:eb082000-eb082fff
*-usb:2
description: USB controller
product: nForce2 USB Controller
vendor: NVIDIA Corporation
physical id: 2.2
bus info: pci@0000:00:02.2
version: a3
width: 32 bits
clock: 66MHz
capabilities: debug pm ehci bus_master cap_list
configuration: driver=ehci-pci latency=0 maxlatency=1 mingnt=3
resources: irq:20 memory:eb083000-eb0830ff
*-network
description: Ethernet interface
product: nForce2 Ethernet Controller
vendor: NVIDIA Corporation
physical id: 4
bus info: pci@0000:00:04.0
logical name: eth2
version: a1
serial: 00:0c:6e:06:31:18
size: 100Mbit/s
capacity: 100Mbit/s
width: 32 bits
clock: 66MHz
capabilities: pm bus_master cap_list ethernet physical mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=forcedeth driverversion=0.64 duplex=full ip=192.168.1.140 latency=0 link=yes maxlatency=20 mingnt=1 multicast=yes port=MII speed=100Mbit/s
resources: irq:22 memory:eb086000-eb086fff ioport:e400(size=8)
*-multimedia:0 UNCLAIMED
description: Multimedia audio controller
product: nForce Audio Processing Unit
vendor: NVIDIA Corporation
physical id: 5
bus info: pci@0000:00:05.0
version: a2
width: 32 bits
clock: 66MHz
capabilities: pm bus_master cap_list
configuration: latency=0 maxlatency=12 mingnt=1
resources: memory:eb000000-eb07ffff
*-multimedia:1
description: Multimedia audio controller
product: nForce2 AC97 Audio Controler (MCP)
vendor: NVIDIA Corporation
physical id: 6
bus info: pci@0000:00:06.0
version: a1
width: 32 bits
clock: 66MHz
capabilities: pm bus_master cap_list
configuration: driver=snd_intel8x0 latency=0 maxlatency=5 mingnt=2
resources: irq:22 ioport:d000(size=256) ioport:d400(size=128) memory:eb080000-eb080fff
*-pci:0
description: PCI bridge
product: nForce2 External PCI Bridge
vendor: NVIDIA Corporation
physical id: 8
bus info: pci@0000:00:08.0
version: a3
width: 32 bits
clock: 66MHz
capabilities: pci normal_decode bus_master
resources: ioport:a000(size=8192) memory:e9000000-eaffffff memory:80000000-800fffff
*-network
description: Ethernet interface
product: RTL-8029(AS)
vendor: Realtek Semiconductor Co., Ltd.
physical id: a
bus info: pci@0000:01:0a.0
logical name: eth0
version: 00
serial: 00:10:a7:0e:38:a0
width: 32 bits
clock: 33MHz
capabilities: ethernet physical
configuration: broadcast=yes driver=ne2k-pci driverversion=1.03 latency=0 multicast=yes
resources: irq:16 ioport:a000(size=32)
*-storage
description: RAID bus controller
product: SiI 3112 [SATALink/SATARaid] Serial ATA Controller
vendor: Silicon Image, Inc.
physical id: b
bus info: pci@0000:01:0b.0
version: 02
width: 32 bits
clock: 66MHz
capabilities: storage pm bus_master cap_list rom
configuration: driver=sata_sil latency=32
resources: irq:18 ioport:a400(size=8) ioport:a800(size=4) ioport:ac00(size=8) ioport:b000(size=4) ioport:b400(size=16) memory:ea000000-ea0001ff memory:80000000-8007ffff
*-ide
description: IDE interface
product: nForce2 IDE
vendor: NVIDIA Corporation
physical id: 9
bus info: pci@0000:00:09.0
version: a2
width: 32 bits
clock: 66MHz
capabilities: ide pm bus_master cap_list
configuration: driver=pata_amd latency=0 maxlatency=1 mingnt=3
resources: irq:0 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8) ioport:376 ioport:f000(size=16)
*-pci:1
description: PCI bridge
product: nForce2 PCI Bridge
vendor: NVIDIA Corporation
physical id: c
bus info: pci@0000:00:0c.0
version: a3
width: 32 bits
clock: 66MHz
capabilities: pci normal_decode bus_master
resources: ioport:c000(size=4096) memory:e4000000-e5ffffff memory:80100000-801fffff
*-network
description: Ethernet interface
product: 3C920B-EMB Integrated Fast Ethernet Controller [Tornado]
vendor: 3Com Corporation
physical id: 1
bus info: pci@0000:02:01.0
logical name: eth1
version: 40
serial: 00:e0:18:f1:e6:3b
size: 10Mbit/s
capacity: 100Mbit/s
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=3c59x duplex=half latency=32 link=no maxlatency=10 mingnt=10 multicast=yes port=MII speed=10Mbit/s
resources: irq:21 ioport:c000(size=128) memory:e5000000-e500007f memory:80100000-8011ffff
*-firewire
description: FireWire (IEEE 1394)
product: nForce2 FireWire (IEEE 1394) Controller
vendor: NVIDIA Corporation
physical id: d
bus info: pci@0000:00:0d.0
version: a3
width: 32 bits
clock: 66MHz
capabilities: pm ohci bus_master cap_list
configuration: driver=firewire_ohci latency=0 maxlatency=1 mingnt=3
resources: irq:20 memory:eb084000-eb0847ff memory:eb085000-eb08503f
*-pci:2
description: PCI bridge
product: nForce2 AGP
vendor: NVIDIA Corporation
physical id: 1e
bus info: pci@0000:00:1e.0
version: a2
width: 32 bits
clock: 66MHz
capabilities: pci normal_decode bus_master
resources: memory:e6000000-e8ffffff memory:c0000000-dfffffff
*-display
description: VGA compatible controller
product: NV40 [GeForce 6800]
vendor: NVIDIA Corporation
physical id: 0
bus info: pci@0000:03:00.0
version: a1
width: 32 bits
clock: 66MHz
capabilities: pm agp agp-3.0 vga_controller bus_master cap_list rom
configuration: driver=nouveau latency=32 maxlatency=1 mingnt=5
resources: irq:19 memory:e6000000-e6ffffff memory:c0000000-dfffffff memory:e7000000-e7ffffff memory:e8000000-e801ffff
*-scsi:0
physical id: 1
logical name: scsi2
capabilities: emulated
*-disk
description: ATA Disk
product: Maxtor 6Y080L0
vendor: Maxtor
physical id: 0.0.0
bus info: scsi@2:0.0.0
logical name: /dev/sda
version: 1BW0
serial: Y2VEK20E
size: 76GiB (81GB)
capabilities: partitioned partitioned:dos
configuration: ansiversion=5 sectorsize=512 signature=9021df6f
*-volume:0
description: EXT4 volume
vendor: Linux
physical id: 1
bus info: scsi@2:0.0.0,1
logical name: /dev/sda1
version: 1.0
serial: 83736664-029b-4caa-ab96-122c9ed260dc
size: 75GiB
capacity: 75GiB
capabilities: primary bootable journaled extended_attributes large_files huge_files dir_nlink 64bit extents ext4 ext2 initialized
configuration: created=2022-03-26 14:48:16 filesystem=ext4 lastmountpoint=/ modified=2022-03-27 08:42:06 mounted=2022-03-27 08:42:14 state=clean
*-volume:1
description: Extended partition
physical id: 2
bus info: scsi@2:0.0.0,2
logical name: /dev/sda2
size: 976MiB
capacity: 976MiB
capabilities: primary extended partitioned partitioned:extended
*-logicalvolume
description: Linux swap / Solaris partition
physical id: 5
logical name: /dev/sda5
capacity: 976MiB
capabilities: nofs
*-scsi:1
physical id: 2
logical name: scsi3
capabilities: emulated
*-cdrom
description: DVD writer
product: DVDRW SHW-160P6S
vendor: LITE-ON
physical id: 0.1.0
bus info: scsi@3:0.1.0
logical name: /dev/cdrom
logical name: /dev/sr0
logical name: /cdrom
version: PS0B
capabilities: removable audio cd-r cd-rw dvd dvd-r
configuration: ansiversion=5 mount.fstype=iso9660 mount.options=ro,noatime state=mounted status=ready
*-medium
physical id: 0
logical name: /dev/cdrom
logical name: /cdrom
capabilities: partitioned partitioned:dos
configuration: mount.fstype=iso9660 mount.options=ro,noatime signature=0ceae12e state=mounted
*-volume UNCLAIMED
description: Hidden HPFS/NTFS partition
physical id: 1
capacity: 1014MiB
capabilities: primary bootable hidden
Lots of detail here that's helpful for diagnosing issues, which is likely why it is included on the installation LiveCD.
dmesg
System message log:
$ dmesg [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.19.0-25-generic (buildd@lgw01-57) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #26~14.04.1-Ubuntu SMP Fri Jul 24 21:18:00 UTC 2015 (Ubuntu 3.19.0-25.26~14.04.1-generic 3.19.8-ckt2) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffeffff] usable [ 0.000000] BIOS-e820: [mem 0x000000007fff0000-0x000000007fff2fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007fff3000-0x000000007fffffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffff0000-0x00000000ffffffff] reserved [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU! [ 0.000000] SMBIOS 2.2 present. [ 0.000000] DMI: ASUSTeK Computer INC. A7N8X/A7N8X, BIOS ASUS A7N8X Deluxe ACPI BIOS Rev 1008 03/29/2004 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x7fff0 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 0E0000000 mask FFC000000 write-combining [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] initial memory mapped: [mem 0x00000000-0x021fffff] [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x37800000-0x379fffff] [ 0.000000] [mem 0x37800000-0x379fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x20000000-0x377fffff] [ 0.000000] [mem 0x20000000-0x377fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x37a00000-0x37bfdfff] [ 0.000000] [mem 0x37a00000-0x37bfdfff] page 4k [ 0.000000] BRK [0x01c28000, 0x01c28fff] PGTABLE [ 0.000000] BRK [0x01c29000, 0x01c29fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x7eba5000-0x7ffeffff] [ 0.000000] Allocated new RAMDISK: [mem 0x367b3000-0x37bfd80d] [ 0.000000] Move RAMDISK from [mem 0x7eba5000-0x7ffef80d] to [mem 0x367b3000-0x37bfd80d] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x000F6D60 000014 (v00 Nvidia) [ 0.000000] ACPI: RSDT 0x7FFF3000 00002C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 0x7FFF3040 000074 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 0x7FFF30C0 0043F8 (v01 NVIDIA AWRDACPI 00001000 MSFT 0100000E) [ 0.000000] ACPI: FACS 0x7FFF0000 000040 [ 0.000000] ACPI: APIC 0x7FFF74C0 00005A (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1155MB HIGHMEM available. [ 0.000000] 891MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 37bfe000 [ 0.000000] low ram: 0 - 37bfe000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] Normal [mem 0x01000000-0x37bfdfff] [ 0.000000] HighMem [mem 0x37bfe000-0x7ffeffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x7ffeffff] [ 0.000000] Initmem setup node 0 [mem 0x00001000-0x7ffeffff] [ 0.000000] On node 0 totalpages: 524174 [ 0.000000] DMA zone: 40 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] Normal zone: 2190 pages used for memmap [ 0.000000] Normal zone: 224254 pages, LIFO batch:31 [ 0.000000] HighMem zone: 295922 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: BIOS IRQ0 override ignored. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] e820: [mem 0x80000000-0xfebfffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 17 pages/cpu @f537b000 s39360 r0 d30272 u69632 [ 0.000000] pcpu-alloc: s39360 r0 d30272 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 521944 [ 0.000000] Kernel command line: file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (00037bfe:0007fff0) [ 0.000000] Initializing Movable for node 0 (00000000:00000000) [ 0.000000] Memory: 2041884K/2096696K available (6949K kernel code, 665K rwdata, 2996K rodata, 932K init, 788K bss, 54812K reserved, 0K cma-reserved, 1183688K highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff15000 - 0xfffff000 ( 936 kB) [ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB) [ 0.000000] .init : 0xc1a60000 - 0xc1b49000 ( 932 kB) [ 0.000000] .data : 0xc16c9a04 - 0xc1a5e780 (3667 kB) [ 0.000000] .text : 0xc1000000 - 0xc16c9a04 (6950 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS:2304 nr_irqs:256 16 [ 0.000000] CPU 0 irqstacks, hard=f4c30000 soft=f4c32000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2162.754 MHz processor [ 0.004015] Calibrating delay loop (skipped), value calculated using timer frequency.. 4325.50 BogoMIPS (lpj=8651016) [ 0.004020] pid_max: default: 32768 minimum: 301 [ 0.004034] ACPI: Core revision 20141107 [ 0.012835] ACPI: All ACPI Tables successfully acquired [ 0.013520] Security Framework initialized [ 0.013553] AppArmor: AppArmor initialized [ 0.013555] Yama: becoming mindful. [ 0.013627] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.013631] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.014049] Initializing cgroup subsys memory [ 0.014063] Initializing cgroup subsys devices [ 0.014071] Initializing cgroup subsys freezer [ 0.014077] Initializing cgroup subsys net_cls [ 0.014083] Initializing cgroup subsys blkio [ 0.014088] Initializing cgroup subsys perf_event [ 0.014094] Initializing cgroup subsys net_prio [ 0.014100] Initializing cgroup subsys hugetlb [ 0.014133] mce: CPU supports 4 MCE banks [ 0.014150] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.014150] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.023009] Freeing SMP alternatives memory: 32K (c1b49000 - c1b51000) [ 0.024365] ftrace: allocating 29288 entries in 58 pages [ 0.036166] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.036627] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.079696] smpboot: CPU0: AMD Athlon(tm) XP 3000+ (fam: 06, model: 0a, stepping: 00) [ 0.080000] Performance Events: AMD PMU driver. [ 0.080000] ... version: 0 [ 0.080000] ... bit width: 48 [ 0.080000] ... generic registers: 4 [ 0.080000] ... value mask: 0000ffffffffffff [ 0.080000] ... max period: 00007fffffffffff [ 0.080000] ... fixed-purpose events: 0 [ 0.080000] ... event mask: 000000000000000f [ 0.080000] x86: Booted up 1 node, 1 CPUs [ 0.080000] smpboot: Total of 1 processors activated (4325.50 BogoMIPS) [ 0.080000] devtmpfs: initialized [ 0.080000] evm: security.selinux [ 0.080000] evm: security.SMACK64 [ 0.080000] evm: security.SMACK64EXEC [ 0.080000] evm: security.SMACK64TRANSMUTE [ 0.080000] evm: security.SMACK64MMAP [ 0.080000] evm: security.ima [ 0.080000] evm: security.capability [ 0.080000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.080000] PM: Registering ACPI NVS region [mem 0x7fff0000-0x7fff2fff] (12288 bytes) [ 0.080000] pinctrl core: initialized pinctrl subsystem [ 0.080000] RTC time: 14:50:41, date: 03/29/22 [ 0.080000] NET: Registered protocol family 16 [ 0.080000] EISA bus registered [ 0.080000] cpuidle: using governor ladder [ 0.080000] cpuidle: using governor menu [ 0.080000] ACPI: bus type PCI registered [ 0.080000] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.111624] PCI: PCI BIOS revision 2.10 entry at 0xfb4a0, last bus=3 [ 0.111627] PCI: Using configuration type 1 for base access [ 0.114899] ACPI: Added _OSI(Module Device) [ 0.114904] ACPI: Added _OSI(Processor Device) [ 0.114906] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.114908] ACPI: Added _OSI(Processor Aggregator Device) [ 0.119296] ACPI: Interpreter enabled [ 0.119317] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580) [ 0.119323] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20141107/hwxface-580) [ 0.119337] ACPI: (supports S0 S1 S4 S5) [ 0.119339] ACPI: Using IOAPIC for interrupt routing [ 0.119382] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.127101] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.127112] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI] [ 0.127119] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.127207] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.127211] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.127214] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.127217] acpi PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored) [ 0.127221] acpi PNP0A03:00: host bridge window [mem 0x80000000-0xfebfffff] (ignored) [ 0.127224] PCI: root bus 00: using default resources [ 0.127228] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.127488] PCI host bridge to bus 0000:00 [ 0.127493] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.127497] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.127500] pci_bus 0000:00: root bus resource [mem 0x00000000-0x3ffffffff] [ 0.127516] pci 0000:00:00.0: [10de:01e0] type 00 class 0x060000 [ 0.127527] pci 0000:00:00.0: reg 0x10: [mem 0xe0000000-0xe3ffffff pref] [ 0.127549] pci 0000:00:00.0: nForce2 C1 Halt Disconnect fixup [ 0.127691] pci 0000:00:00.1: [10de:01eb] type 00 class 0x050000 [ 0.127827] pci 0000:00:00.2: [10de:01ee] type 00 class 0x050000 [ 0.127964] pci 0000:00:00.3: [10de:01ed] type 00 class 0x050000 [ 0.128111] pci 0000:00:00.4: [10de:01ec] type 00 class 0x050000 [ 0.128250] pci 0000:00:00.5: [10de:01ef] type 00 class 0x050000 [ 0.128394] pci 0000:00:01.0: [10de:0060] type 00 class 0x060100 [ 0.128591] pci 0000:00:01.1: [10de:0064] type 00 class 0x0c0500 [ 0.128607] pci 0000:00:01.1: reg 0x10: [io 0xe000-0xe01f] [ 0.128670] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.128817] pci 0000:00:02.0: [10de:0067] type 00 class 0x0c0310 [ 0.128833] pci 0000:00:02.0: reg 0x10: [mem 0xeb087000-0xeb087fff] [ 0.128896] pci 0000:00:02.0: supports D1 D2 [ 0.128899] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.128965] pci 0000:00:02.0: System wakeup disabled by ACPI [ 0.129048] pci 0000:00:02.1: [10de:0067] type 00 class 0x0c0310 [ 0.129064] pci 0000:00:02.1: reg 0x10: [mem 0xeb082000-0xeb082fff] [ 0.129126] pci 0000:00:02.1: supports D1 D2 [ 0.129129] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.129194] pci 0000:00:02.1: System wakeup disabled by ACPI [ 0.129280] pci 0000:00:02.2: [10de:0068] type 00 class 0x0c0320 [ 0.129297] pci 0000:00:02.2: reg 0x10: [mem 0xeb083000-0xeb0830ff] [ 0.129370] pci 0000:00:02.2: supports D1 D2 [ 0.129373] pci 0000:00:02.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.129467] pci 0000:00:02.2: System wakeup disabled by ACPI [ 0.129554] pci 0000:00:04.0: [10de:0066] type 00 class 0x020000 [ 0.129570] pci 0000:00:04.0: reg 0x10: [mem 0xeb086000-0xeb086fff] [ 0.129579] pci 0000:00:04.0: reg 0x14: [io 0xe400-0xe407] [ 0.129636] pci 0000:00:04.0: supports D1 D2 [ 0.129639] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.129705] pci 0000:00:04.0: System wakeup disabled by ACPI [ 0.129789] pci 0000:00:05.0: [10de:006b] type 00 class 0x040100 [ 0.129805] pci 0000:00:05.0: reg 0x10: [mem 0xeb000000-0xeb07ffff] [ 0.129867] pci 0000:00:05.0: supports D1 D2 [ 0.129992] pci 0000:00:06.0: [10de:006a] type 00 class 0x040100 [ 0.130008] pci 0000:00:06.0: reg 0x10: [io 0xd000-0xd0ff] [ 0.130017] pci 0000:00:06.0: reg 0x14: [io 0xd400-0xd47f] [ 0.130026] pci 0000:00:06.0: reg 0x18: [mem 0xeb080000-0xeb080fff] [ 0.130076] pci 0000:00:06.0: supports D1 D2 [ 0.130195] pci 0000:00:08.0: [10de:006c] type 01 class 0x060400 [ 0.130285] pci 0000:00:08.0: System wakeup disabled by ACPI [ 0.130365] pci 0000:00:09.0: [10de:0065] type 00 class 0x01018a [ 0.130405] pci 0000:00:09.0: reg 0x20: [io 0xf000-0xf00f] [ 0.130423] pci 0000:00:09.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.130426] pci 0000:00:09.0: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.130429] pci 0000:00:09.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.130432] pci 0000:00:09.0: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.130576] pci 0000:00:0c.0: [10de:006d] type 01 class 0x060400 [ 0.130673] pci 0000:00:0c.0: System wakeup disabled by ACPI [ 0.130754] pci 0000:00:0d.0: [10de:006e] type 00 class 0x0c0010 [ 0.130769] pci 0000:00:0d.0: reg 0x10: [mem 0xeb084000-0xeb0847ff] [ 0.130779] pci 0000:00:0d.0: reg 0x14: [mem 0xeb085000-0xeb08503f] [ 0.130835] pci 0000:00:0d.0: supports D1 D2 [ 0.130838] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.130904] pci 0000:00:0d.0: System wakeup disabled by ACPI [ 0.130999] pci 0000:00:1e.0: [10de:01e8] type 01 class 0x060400 [ 0.131206] pci 0000:01:0a.0: [10ec:8029] type 00 class 0x020000 [ 0.131224] pci 0000:01:0a.0: reg 0x10: [io 0xa000-0xa01f] [ 0.131371] pci 0000:01:0b.0: [1095:3112] type 00 class 0x010400 [ 0.131391] pci 0000:01:0b.0: reg 0x10: [io 0xa400-0xa407] [ 0.131404] pci 0000:01:0b.0: reg 0x14: [io 0xa800-0xa803] [ 0.131416] pci 0000:01:0b.0: reg 0x18: [io 0xac00-0xac07] [ 0.131428] pci 0000:01:0b.0: reg 0x1c: [io 0xb000-0xb003] [ 0.131440] pci 0000:01:0b.0: reg 0x20: [io 0xb400-0xb40f] [ 0.131452] pci 0000:01:0b.0: reg 0x24: [mem 0xea000000-0xea0001ff] [ 0.131464] pci 0000:01:0b.0: reg 0x30: [mem 0x00000000-0x0007ffff pref] [ 0.131499] pci 0000:01:0b.0: supports D1 D2 [ 0.131591] pci 0000:00:08.0: PCI bridge to [bus 01] [ 0.131597] pci 0000:00:08.0: bridge window [io 0xa000-0xbfff] [ 0.131602] pci 0000:00:08.0: bridge window [mem 0xe9000000-0xeaffffff] [ 0.131668] pci 0000:02:01.0: [10b7:9201] type 00 class 0x020000 [ 0.131688] pci 0000:02:01.0: reg 0x10: [io 0xc000-0xc07f] [ 0.131700] pci 0000:02:01.0: reg 0x14: [mem 0xe5000000-0xe500007f] [ 0.131746] pci 0000:02:01.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 0.131779] pci 0000:02:01.0: supports D1 D2 [ 0.131782] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.131901] pci 0000:00:0c.0: PCI bridge to [bus 02] [ 0.131906] pci 0000:00:0c.0: bridge window [io 0xc000-0xcfff] [ 0.131911] pci 0000:00:0c.0: bridge window [mem 0xe4000000-0xe5ffffff] [ 0.131981] pci 0000:03:00.0: [10de:0041] type 00 class 0x030000 [ 0.132008] pci 0000:03:00.0: reg 0x10: [mem 0xe6000000-0xe6ffffff] [ 0.132018] pci 0000:03:00.0: reg 0x14: [mem 0xc0000000-0xdfffffff pref] [ 0.132028] pci 0000:03:00.0: reg 0x18: [mem 0xe7000000-0xe7ffffff] [ 0.132055] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 0.132192] pci 0000:00:1e.0: PCI bridge to [bus 03] [ 0.132199] pci 0000:00:1e.0: bridge window [mem 0xe6000000-0xe8ffffff] [ 0.132204] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff pref] [ 0.132219] pci_bus 0000:00: on NUMA node 0 [ 0.132328] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.132401] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.132473] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.132544] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.132612] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.132683] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.132752] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.132821] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.132890] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.132959] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.133028] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.133097] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.133166] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.133242] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.133311] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.133385] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.133458] ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled. [ 0.133518] ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled. [ 0.133577] ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled. [ 0.133636] ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled. [ 0.133695] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. [ 0.133785] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled. [ 0.133875] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled. [ 0.133964] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled. [ 0.134053] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled. [ 0.134141] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled. [ 0.134229] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled. [ 0.134290] ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled. [ 0.134377] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled. [ 0.134465] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled. [ 0.134553] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled. [ 0.134641] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled. [ 0.135658] vgaarb: setting as boot device: PCI:0000:03:00.0 [ 0.135663] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.135664] vgaarb: loaded [ 0.135666] vgaarb: bridge control possible 0000:03:00.0 [ 0.136219] SCSI subsystem initialized [ 0.136319] libata version 3.00 loaded. [ 0.136387] ACPI: bus type USB registered [ 0.136434] usbcore: registered new interface driver usbfs [ 0.136455] usbcore: registered new interface driver hub [ 0.136479] usbcore: registered new device driver usb [ 0.136748] PCI: Using ACPI for IRQ routing [ 0.136755] PCI: pci_cache_line_size set to 32 bytes [ 0.136817] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.136821] e820: reserve RAM buffer [mem 0x7fff0000-0x7fffffff] [ 0.137066] NetLabel: Initializing [ 0.137069] NetLabel: domain hash size = 128 [ 0.137071] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.137093] NetLabel: unlabeled traffic allowed by default [ 0.137283] Switched to clocksource refined-jiffies [ 0.149368] AppArmor: AppArmor Filesystem Enabled [ 0.149532] pnp: PnP ACPI init [ 0.149933] system 00:00: [io 0x4000-0x407f] could not be reserved [ 0.149938] system 00:00: [io 0x4080-0x40ff] has been reserved [ 0.149942] system 00:00: [io 0x4400-0x447f] has been reserved [ 0.149946] system 00:00: [io 0x4480-0x44ff] could not be reserved [ 0.149949] system 00:00: [io 0x4200-0x427f] has been reserved [ 0.149952] system 00:00: [io 0x4280-0x42ff] has been reserved [ 0.149958] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.150026] system 00:01: [io 0x5000-0x503f] has been reserved [ 0.150030] system 00:01: [io 0x5500-0x553f] has been reserved [ 0.150035] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.150258] system 00:02: [mem 0x000d2800-0x000d3fff] has been reserved [ 0.150263] system 00:02: [mem 0x000f0000-0x000f7fff] could not be reserved [ 0.150267] system 00:02: [mem 0x000f8000-0x000fbfff] could not be reserved [ 0.150270] system 00:02: [mem 0x000fc000-0x000fffff] could not be reserved [ 0.150274] system 00:02: [mem 0x7fff0000-0x7fffffff] could not be reserved [ 0.150277] system 00:02: [mem 0xffff0000-0xffffffff] has been reserved [ 0.150281] system 00:02: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.150285] system 00:02: [mem 0x00100000-0x7ffeffff] could not be reserved [ 0.150288] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.150292] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.150296] system 00:02: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.150887] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 0.150892] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.150964] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.151117] pnp 00:05: [dma 2] [ 0.151178] pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.151439] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.151724] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.152157] pnp 00:08: [dma 3] [ 0.152232] pnp 00:08: Plug and Play ACPI device, IDs PNP0401 (active) [ 0.152328] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.152401] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.152655] pnp 00:0b: Plug and Play ACPI device, IDs PNPb006 (active) [ 0.152878] pnp 00:0c: Plug and Play ACPI device, IDs PNPb02f (active) [ 0.152891] pnp: PnP ACPI: found 13 devices [ 0.152898] PnPBIOS: Disabled by ACPI PNP [ 0.190872] Switched to clocksource acpi_pm [ 0.190923] pci 0000:00:08.0: BAR 15: assigned [mem 0x80000000-0x800fffff pref] [ 0.190929] pci 0000:00:0c.0: BAR 15: assigned [mem 0x80100000-0x801fffff pref] [ 0.190934] pci 0000:01:0b.0: BAR 6: assigned [mem 0x80000000-0x8007ffff pref] [ 0.190938] pci 0000:00:08.0: PCI bridge to [bus 01] [ 0.190943] pci 0000:00:08.0: bridge window [io 0xa000-0xbfff] [ 0.190950] pci 0000:00:08.0: bridge window [mem 0xe9000000-0xeaffffff] [ 0.190955] pci 0000:00:08.0: bridge window [mem 0x80000000-0x800fffff pref] [ 0.190963] pci 0000:02:01.0: BAR 6: assigned [mem 0x80100000-0x8011ffff pref] [ 0.190966] pci 0000:00:0c.0: PCI bridge to [bus 02] [ 0.190970] pci 0000:00:0c.0: bridge window [io 0xc000-0xcfff] [ 0.190976] pci 0000:00:0c.0: bridge window [mem 0xe4000000-0xe5ffffff] [ 0.190980] pci 0000:00:0c.0: bridge window [mem 0x80100000-0x801fffff pref] [ 0.190989] pci 0000:03:00.0: BAR 6: assigned [mem 0xe8000000-0xe801ffff pref] [ 0.190992] pci 0000:00:1e.0: PCI bridge to [bus 03] [ 0.190997] pci 0000:00:1e.0: bridge window [mem 0xe6000000-0xe8ffffff] [ 0.191002] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff pref] [ 0.191009] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.191012] pci_bus 0000:00: resource 5 [mem 0x00000000-0x3ffffffff] [ 0.191016] pci_bus 0000:01: resource 0 [io 0xa000-0xbfff] [ 0.191019] pci_bus 0000:01: resource 1 [mem 0xe9000000-0xeaffffff] [ 0.191023] pci_bus 0000:01: resource 2 [mem 0x80000000-0x800fffff pref] [ 0.191026] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff] [ 0.191029] pci_bus 0000:02: resource 1 [mem 0xe4000000-0xe5ffffff] [ 0.191032] pci_bus 0000:02: resource 2 [mem 0x80100000-0x801fffff pref] [ 0.191036] pci_bus 0000:03: resource 1 [mem 0xe6000000-0xe8ffffff] [ 0.191039] pci_bus 0000:03: resource 2 [mem 0xc0000000-0xdfffffff pref] [ 0.191095] NET: Registered protocol family 2 [ 0.191419] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.191470] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.191559] TCP: Hash tables configured (established 8192 bind 8192) [ 0.191636] TCP: reno registered [ 0.191640] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.191659] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.191744] NET: Registered protocol family 1 [ 0.191744] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22 [ 0.191744] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21 [ 0.191744] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20 [ 0.191744] pci 0000:03:00.0: Video device with shadowed ROM [ 0.191744] PCI: CLS 32 bytes, default 32 [ 0.191744] Trying to unpack rootfs image as initramfs... [ 6.027642] Freeing initrd memory: 20780K (f67b3000 - f7bfe000) [ 6.027844] microcode: AMD CPU family 0x6 not supported [ 6.027929] Scanning for low memory corruption every 60 seconds [ 6.028462] futex hash table entries: 256 (order: 2, 16384 bytes) [ 6.028493] Initialise system trusted keyring [ 6.028535] audit: initializing netlink subsys (disabled) [ 6.028580] audit: type=2000 audit(1648565447.027:1): initialized [ 6.029037] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 6.032630] zpool: loaded [ 6.032634] zbud: loaded [ 6.032752] VFS: Disk quotas dquot_6.5.2 [ 6.032825] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 6.033776] fuse init (API version 7.23) [ 6.034066] Key type big_key registered [ 6.034528] Key type asymmetric registered [ 6.034533] Asymmetric key parser 'x509' registered [ 6.034566] bounce: pool size: 64 pages [ 6.034637] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 6.034682] io scheduler noop registered [ 6.034686] io scheduler deadline registered (default) [ 6.034755] io scheduler cfq registered [ 6.035007] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 6.035041] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 6.035257] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 6.035266] ACPI: Power Button [PWRB] [ 6.035361] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 6.035365] ACPI: Power Button [PWRF] [ 6.035584] GHES: HEST is not enabled! [ 6.035770] isapnp: Scanning for PnP cards... [ 6.041351] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 6.061854] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 6.125974] 00:07: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 6.128738] Linux agpgart interface v0.103 [ 6.128844] agpgart: Detected NVIDIA nForce2 chipset [ 6.133167] agpgart-nvidia 0000:00:00.0: AGP aperture is 64M @ 0xe0000000 [ 6.179388] brd: module loaded [ 6.180675] loop: module loaded [ 6.181155] libphy: Fixed MDIO Bus: probed [ 6.181160] tun: Universal TUN/TAP device driver, 1.6 [ 6.181162] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 6.181236] PPP generic driver version 2.4.2 [ 6.181372] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 6.181382] ehci-pci: EHCI PCI platform driver [ 6.181604] ehci-pci 0000:00:02.2: EHCI Host Controller [ 6.181616] ehci-pci 0000:00:02.2: new USB bus registered, assigned bus number 1 [ 6.181631] ehci-pci 0000:00:02.2: debug port 1 [ 6.181676] ehci-pci 0000:00:02.2: selective suspend/wakeup unavailable [ 6.181683] ehci-pci 0000:00:02.2: cache line size of 32 is not supported [ 6.181713] ehci-pci 0000:00:02.2: irq 20, io mem 0xeb083000 [ 6.225334] ehci-pci 0000:00:02.2: USB 2.0 started, EHCI 1.00 [ 6.269076] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 6.269080] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.269083] usb usb1: Product: EHCI Host Controller [ 6.269086] usb usb1: Manufacturer: Linux 3.19.0-25-generic ehci_hcd [ 6.269088] usb usb1: SerialNumber: 0000:00:02.2 [ 6.269295] hub 1-0:1.0: USB hub found [ 6.269309] hub 1-0:1.0: 6 ports detected [ 6.269595] ehci-platform: EHCI generic platform driver [ 6.269614] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 6.269622] ohci-pci: OHCI PCI platform driver [ 6.269727] ohci-pci 0000:00:02.0: OHCI PCI host controller [ 6.269736] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 6.269771] ohci-pci 0000:00:02.0: irq 22, io mem 0xeb087000 [ 6.446175] isapnp: No Plug & Play device found [ 6.446214] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 6.446218] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.446221] usb usb2: Product: OHCI PCI host controller [ 6.446223] usb usb2: Manufacturer: Linux 3.19.0-25-generic ohci_hcd [ 6.446226] usb usb2: SerialNumber: 0000:00:02.0 [ 6.446423] hub 2-0:1.0: USB hub found [ 6.446436] hub 2-0:1.0: 3 ports detected [ 6.446707] ohci-pci 0000:00:02.1: OHCI PCI host controller [ 6.446716] ohci-pci 0000:00:02.1: new USB bus registered, assigned bus number 3 [ 6.446750] ohci-pci 0000:00:02.1: irq 21, io mem 0xeb082000 [ 6.502071] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 6.502076] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.502079] usb usb3: Product: OHCI PCI host controller [ 6.502082] usb usb3: Manufacturer: Linux 3.19.0-25-generic ohci_hcd [ 6.502084] usb usb3: SerialNumber: 0000:00:02.1 [ 6.502322] hub 3-0:1.0: USB hub found [ 6.502337] hub 3-0:1.0: 3 ports detected [ 6.502564] ohci-platform: OHCI generic platform driver [ 6.502592] uhci_hcd: USB Universal Host Controller Interface driver [ 6.502723] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 6.505982] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 6.505990] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 6.506219] mousedev: PS/2 mouse device common for all mice [ 6.506456] rtc_cmos 00:04: RTC can wake from S4 [ 6.506632] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 6.506662] rtc_cmos 00:04: alarms up to one year, y3k, 242 bytes nvram [ 6.506679] i2c /dev entries driver [ 6.506780] device-mapper: uevent: version 1.0.3 [ 6.506906] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com [ 6.506949] platform eisa.0: Probing EISA bus 0 [ 6.506976] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 6.506980] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 6.506998] platform eisa.0: EISA: Detected 0 cards [ 6.507018] cpufreq-nforce2: Detected nForce2 chipset revision A2 [ 6.507020] cpufreq-nforce2: FSB changing is maybe unstable and can lead to crashes and data loss. [ 6.507029] cpufreq-nforce2: FSB currently at 166 MHz, FID 13.0 [ 6.507071] tsc: Marking TSC unstable due to cpufreq changes [ 6.508768] ledtrig-cpu: registered to indicate activity on CPUs [ 6.508784] PCCT header not found. [ 6.508785] ACPI PCC probe failed. [ 6.509008] TCP: cubic registered [ 6.509286] NET: Registered protocol family 10 [ 6.509581] NET: Registered protocol family 17 [ 6.509601] Key type dns_resolver registered [ 6.509835] Using IPI No-Shortcut mode [ 6.510070] Loading compiled-in X.509 certificates [ 6.515409] Loaded X.509 cert 'Magrathea: Glacier signing key: bb268d6deecbed52273475f8cb661bd2ca208a1b' [ 6.515439] registered taskstats version 1 [ 6.518869] Key type trusted registered [ 6.525214] Key type encrypted registered [ 6.525234] AppArmor: AppArmor sha1 policy hashing enabled [ 6.525240] ima: No TPM chip found, activating TPM-bypass! [ 6.525282] evm: HMAC attrs: 0x1 [ 6.525691] Magic number: 14:433:840 [ 6.525857] rtc_cmos 00:04: setting system clock to 2022-03-29 14:50:48 UTC (1648565448) [ 6.525944] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 6.525946] EDD information not available. [ 6.526050] PM: Hibernation image not present or could not be loaded. [ 6.527153] Freeing unused kernel memory: 932K (c1a60000 - c1b49000) [ 6.527254] Write protecting the kernel text: 6952k [ 6.527357] Write protecting the kernel read-only data: 3000k [ 6.536558] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 6.552265] systemd-udevd[92]: starting version 204 [ 6.648632] sata_sil 0000:01:0b.0: version 2.4 [ 6.648912] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 [ 6.651807] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 6.672523] scsi host0: sata_sil [ 6.688691] scsi host1: sata_sil [ 6.688820] ata1: SATA max UDMA/100 mmio m512@0xea000000 tf 0xea000080 irq 18 [ 6.688825] ata2: SATA max UDMA/100 mmio m512@0xea000000 tf 0xea0000c0 irq 18 [ 6.712028] Floppy drive(s): fd0 is 1.44M [ 6.714549] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22 [ 6.720670] ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker [ 6.720901] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 [ 6.721308] ne2k-pci 0000:01:0a.0 eth0: RealTek RTL-8029 found at 0xa000, IRQ 16, 00:10:a7:0e:38:a0. [ 6.734567] ACPI: PCI Interrupt Link [AP3C] enabled at IRQ 21 [ 6.734606] 3c59x: Donald Becker and others. [ 6.734621] 0000:02:01.0: 3Com PCI 3c920 Tornado at f841a000. [ 6.758269] FDC 0 is a post-1991 82077 [ 6.766983] [drm] Initialized drm 1.1.0 20060810 [ 6.928503] wmi: Mapper loaded [ 7.016762] ata1: SATA link down (SStatus 0 SControl 310) [ 7.061799] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 [ 7.062301] nouveau [ DEVICE][0000:03:00.0] BOOT0 : 0x440100a1 [ 7.062305] nouveau [ DEVICE][0000:03:00.0] Chipset: NV40 (NV40) [ 7.062308] nouveau [ DEVICE][0000:03:00.0] Family : NV40 [ 7.155712] nouveau [ VBIOS][0000:03:00.0] using image from PROM [ 7.155910] nouveau [ VBIOS][0000:03:00.0] BIT signature found [ 7.155914] nouveau [ VBIOS][0000:03:00.0] version 05.40.02.41.00 [ 7.157001] nouveau W[ PTIMER][0000:03:00.0] unknown input clock freq [ 7.157016] nouveau [ PFB][0000:03:00.0] RAM type: DDR1 [ 7.157019] nouveau [ PFB][0000:03:00.0] RAM size: 512 MiB [ 7.157022] nouveau [ PFB][0000:03:00.0] ZCOMP: 189440 tags [ 7.204507] nouveau [ PTHERM][0000:03:00.0] FAN control: PWM [ 7.204528] nouveau [ PTHERM][0000:03:00.0] internal sensor: no [ 7.204544] nouveau [ CLK][0000:03:00.0] 20: core 325 MHz shader 325 MHz memory 540 MHz [ 7.204560] nouveau [ CLK][0000:03:00.0] --: core 200 MHz shader 200 MHz memory 401 MHz [ 7.204647] agpgart-nvidia 0000:00:00.0: AGP 3.0 bridge [ 7.204663] agpgart: systemd-udevd tried to set rate=x12. Setting to AGP3 x8 mode. [ 7.204669] agpgart-nvidia 0000:00:00.0: putting AGP V3 device into 8x mode [ 7.204736] nouveau 0000:03:00.0: putting AGP V3 device into 8x mode [ 7.204834] [TTM] Zone kernel: Available graphics memory: 439970 kiB [ 7.204837] [TTM] Zone highmem: Available graphics memory: 1031814 kiB [ 7.204839] [TTM] Initializing pool allocator [ 7.204848] [TTM] Initializing DMA pool allocator [ 7.204874] nouveau [ DRM] VRAM: 506 MiB [ 7.204876] nouveau [ DRM] GART: 64 MiB [ 7.204883] nouveau [ DRM] TMDS table version 1.1 [ 7.204886] nouveau [ DRM] DCB version 3.0 [ 7.204890] nouveau [ DRM] DCB outp 00: 01000300 00000028 [ 7.204894] nouveau [ DRM] DCB outp 01: 02011310 00000028 [ 7.204896] nouveau [ DRM] DCB outp 02: 01011312 00000000 [ 7.204899] nouveau [ DRM] DCB outp 03: 020223f1 0080c030 [ 7.204902] nouveau [ DRM] DCB conn 00: 1000 [ 7.204905] nouveau [ DRM] DCB conn 01: 1130 [ 7.204908] nouveau [ DRM] DCB conn 02: 0212 [ 7.205584] nouveau [ DRM] Saving VGA fonts [ 7.279220] nouveau W[ DRM] unknown connector type 12 [ 7.281280] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 7.281283] [drm] Driver supports precise vblank timestamp query. [ 7.281290] nouveau [ DRM] 0xD260: Parsing digital output script table [ 7.332457] forcedeth 0000:00:04.0: ifname eth2, PHY OUI 0x732 @ 1, addr 00:0c:6e:06:31:18 [ 7.332462] forcedeth 0000:00:04.0: timirq lnktim desc-v1 [ 7.332869] pata_amd 0000:00:09.0: version 0.4.1 [ 7.341632] scsi host2: pata_amd [ 7.341990] nouveau [ DRM] MM: using M2MF for buffer copies [ 7.342009] nouveau [ DRM] Setting dpms mode 3 on TV encoder (output 3) [ 7.374457] scsi host3: pata_amd [ 7.374561] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 7.374565] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 7.375090] ACPI: PCI Interrupt Link [APCM] enabled at IRQ 20 [ 7.384043] ata2: SATA link down (SStatus 0 SControl 310) [ 7.428054] firewire_ohci 0000:00:0d.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x0 [ 7.432226] nouveau [ DRM] allocated 1280x1024 fb: 0x9000, bo f7616c00 [ 7.432423] fbcon: nouveaufb (fb0) is primary device [ 7.456038] Console: switching to colour frame buffer device 160x64 [ 7.457031] nouveau 0000:03:00.0: fb0: nouveaufb frame buffer device [ 7.457034] nouveau 0000:03:00.0: registered panic notifier [ 7.457042] [drm] Initialized nouveau 1.2.1 20120801 for 0000:03:00.0 on minor 0 [ 7.536542] ata3.00: HPA detected: current 160084415, native 160086528 [ 7.536552] ata3.00: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133 [ 7.536555] ata3.00: 160084415 sectors, multi 16: LBA [ 7.536566] ata3: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f, BIOS=0x7f000 (0xc70000c5) ACPI=0x7f01f (15:600:0x13) [ 7.552425] ata3.00: configured for UDMA/133 [ 7.552596] scsi 2:0:0:0: Direct-Access ATA Maxtor 6Y080L0 1BW0 PQ: 0 ANSI: 5 [ 7.553029] sd 2:0:0:0: [sda] 160084415 512-byte logical blocks: (81.9 GB/76.3 GiB) [ 7.553110] sd 2:0:0:0: [sda] Write Protect is off [ 7.553114] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 7.553150] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7.553596] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 7.593522] sda: sda1 sda2 < sda5 > [ 7.594062] sd 2:0:0:0: [sda] Attached SCSI disk [ 7.736780] psmouse serio1: trackpoint: IBM TrackPoint firmware: 0x0b, buttons: 3/3 [ 7.749676] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input4 [ 7.908353] ata4.01: ATAPI: LITE-ON DVDRW SHW-160P6S, PS0B, max UDMA/66 [ 7.908366] ata4: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc70000c5) ACPI=0x1f01f (600:30:0x1c) [ 7.908369] ata4.01: limited to UDMA/33 due to 40-wire cable [ 7.940258] ata4.01: configured for UDMA/33 [ 7.941718] scsi 3:0:1:0: CD-ROM LITE-ON DVDRW SHW-160P6S PS0B PQ: 0 ANSI: 5 [ 7.951220] sr 3:0:1:0: [sr0] scsi3-mmc drive: 47x/125x writer cd/rw xa/form2 cdda tray [ 7.951224] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 7.951777] sr 3:0:1:0: Attached scsi CD-ROM sr0 [ 7.952064] sr 3:0:1:0: Attached scsi generic sg1 type 5 [ 12.978253] random: nonblocking pool is initialized [ 13.249992] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 13.948109] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 13.957398] ISO 9660 Extensions: RRIP_1991A [ 14.326421] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 52.120079] Adding 999420k swap on /dev/sda5. Priority:-1 extents:1 across:999420k FS [ 53.622511] systemd-udevd[1065]: starting version 204 [ 60.164587] lp: driver loaded but no devices found [ 61.309799] ppdev: user-space parallel port driver [ 61.332120] parport_pc 00:08: reported by Plug and Play ACPI [ 61.332183] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] [ 61.428388] lp0: using parport0 (interrupt-driven). [ 62.619350] init: cups main process (1125) killed by HUP signal [ 62.619376] init: cups main process ended, respawning [ 62.952542] Bluetooth: Core ver 2.20 [ 62.952644] NET: Registered protocol family 31 [ 62.952647] Bluetooth: HCI device and connection manager initialized [ 62.952656] Bluetooth: HCI socket layer initialized [ 62.952661] Bluetooth: L2CAP socket layer initialized [ 62.952671] Bluetooth: SCO socket layer initialized [ 63.542705] Bluetooth: RFCOMM TTY layer initialized [ 63.542727] Bluetooth: RFCOMM socket layer initialized [ 63.542736] Bluetooth: RFCOMM ver 1.11 [ 63.803350] i2c i2c-3: nForce2 SMBus adapter at 0x5000 [ 63.803523] i2c i2c-4: nForce2 SMBus adapter at 0x5500 [ 63.995397] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 63.995405] Bluetooth: BNEP filters: protocol multicast [ 63.995414] Bluetooth: BNEP socket layer initialized [ 64.280274] gameport gameport0: NS558 PnP Gameport is pnp00:0c/gameport0, io 0x201, speed 691kHz [ 65.047970] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 66.157195] device-mapper: multipath: version 1.7.0 loaded [ 67.700831] init: failsafe main process (1305) killed by TERM signal [ 68.522391] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22 [ 68.852028] snd_intel8x0 0000:00:06.0: intel8x0_measure_ac97_clock: measured 53045 usecs (2576 samples) [ 68.852036] snd_intel8x0 0000:00:06.0: clocking to 47444 [ 85.524922] init: alsa-restore main process (1668) terminated with status 99 [ 87.840721] eth1: setting half-duplex. [ 87.840843] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 92.016016] ------------[ cut here ]------------ [ 92.016042] WARNING: CPU: 0 PID: 0 at /build/linux-lts-vivid-nmIDaB/linux-lts-vivid-3.19.0/net/sched/sch_generic.c:303 dev_watchdog+0x1f3/0x200() [ 92.016045] NETDEV WATCHDOG: eth0 (ne2k-pci): transmit queue 0 timed out [ 92.016047] Modules linked in: dm_crypt snd_intel8x0 snd_wavefront snd_cs4236 snd_ac97_codec snd_opl3_lib snd_hwdep snd_wss_lib ac97_bus snd_pcm snd_mpu401 snd_mpu401_uart snd_seq_midi dm_multipath snd_seq_midi_event snd_rawmidi snd_seq scsi_dh snd_seq_device shpchp serio_raw snd_timer 8250_fintek ns558 bnep gameport i2c_nforce2 rfcomm snd bluetooth soundcore parport_pc ppdev mac_hid lp parport squashfs overlay nls_utf8 isofs dm_mirror dm_region_hash dm_log pata_acpi nouveau mxm_wmi wmi video i2c_algo_bit ttm firewire_ohci drm_kms_helper firewire_core psmouse drm 3c59x ne2k_pci pata_amd 8390 crc_itu_t mii forcedeth floppy sata_sil [ 92.016102] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.19.0-25-generic #26~14.04.1-Ubuntu [ 92.016104] Hardware name: ASUSTeK Computer INC. A7N8X/A7N8X, BIOS ASUS A7N8X Deluxe ACPI BIOS Rev 1008 03/29/2004 [ 92.016107] 00000000 00000000 f4c33ec0 c16c1244 f4c33f00 f4c33ef0 c105f267 c1968444 [ 92.016112] f4c33f1c 00000000 c1968480 0000012f c15f5dc3 c15f5dc3 00000000 f7594000 [ 92.016117] fffffff1 f4c33f08 c105f2d3 00000009 f4c33f00 c1968444 f4c33f1c f4c33f40 [ 92.016122] Call Trace: [ 92.016133] [<c16c1244>] dump_stack+0x41/0x52 [ 92.016140] [<c105f267>] warn_slowpath_common+0x87/0xc0 [ 92.016144] [<c15f5dc3>] ? dev_watchdog+0x1f3/0x200 [ 92.016148] [<c15f5dc3>] ? dev_watchdog+0x1f3/0x200 [ 92.016152] [<c105f2d3>] warn_slowpath_fmt+0x33/0x40 [ 92.016155] [<c15f5dc3>] dev_watchdog+0x1f3/0x200 [ 92.016164] [<c10b9ad0>] call_timer_fn+0x30/0xf0 [ 92.016168] [<c15f5bd0>] ? dev_graft_qdisc+0x70/0x70 [ 92.016172] [<c10baf04>] run_timer_softirq+0x174/0x290 [ 92.016175] [<c15f5bd0>] ? dev_graft_qdisc+0x70/0x70 [ 92.016180] [<c1062e53>] __do_softirq+0xc3/0x230 [ 92.016184] [<c1062d90>] ? cpu_callback+0x160/0x160 [ 92.016191] [<c1012c02>] do_softirq_own_stack+0x22/0x30 [ 92.016193] <IRQ> [<c10631d5>] irq_exit+0x95/0xa0 [ 92.016203] [<c16c8b38>] smp_apic_timer_interrupt+0x38/0x50 [ 92.016207] [<c16c827c>] apic_timer_interrupt+0x34/0x3c [ 92.016215] [<c104f095>] ? native_safe_halt+0x5/0x10 [ 92.016220] [<c101982c>] default_idle+0x1c/0xa0 [ 92.016224] [<c1019ffe>] arch_cpu_idle+0xe/0x10 [ 92.016230] [<c1096ff9>] cpu_startup_entry+0x319/0x350 [ 92.016238] [<c16b5182>] rest_init+0x62/0x70 [ 92.016244] [<c1a60c9a>] start_kernel+0x420/0x426 [ 92.016248] [<c1a6060c>] ? repair_env_string+0x51/0x51 [ 92.016251] [<c1a6039c>] i386_start_kernel+0x137/0x13a [ 92.016254] ---[ end trace 3c2e1c5c4510cd6e ]--- [ 101.378383] init: plymouth-upstart-bridge main process ended, respawning [ 101.422834] init: plymouth-upstart-bridge main process ended, respawning [ 115.249763] pci 0000:00:0c.0: System wakeup enabled by ACPI [ 140.282202] cpufreq: ondemand governor failed, too long transition latency of HW, fallback to performance governor
Lots of information about the system and detection of the devices in here... The warning triggered by the ne2k-pci card appears to be due to it not being physically connected to the network. Not sure why that appears as a scary looking warning though.
System Information - Debian Linux 11 (bullseye)
Debian Linux 11 (bullseye), released 14-Aug-2021, supports 32-bit i686 systems on a modern kernel (Linux 5.10.0), including older CPUs without PAE and SSE2. So let's see what this modern Linux has to say about this system...
uname & lsb_release
Operating system release and version information:
$ uname -a Linux salix 5.10.0-13-686-pae #1 SMP Debian 5.10.106-1 (2022-03-17) i686 GNU/Linux
So a "Linux" kernel, on a node named "salix", kernel release "5.10.0-13-686-pae" (a patched 5.10.0 kernel for i686 with PAE support), version "#1 SMP Debian 5.10.106-1 (2022-03-17)", machine type "i686", for operating system "GNU/Linux".
$ lsb_release -a No LSB modules are available. Distributor ID: Debian Description: Debian GNU/Linux 11 (bullseye) Release: 11 Codename: bullseye
And the Linux operating system is a Debian Linux 11 (bullseye) distribution.
lscpu & /proc/cpuinfo
Processor information:
$ lscpu Architecture: i686 CPU op-mode(s): 32-bit Byte Order: Little Endian Address sizes: 34 bits physical, 32 bits virtual CPU(s): 1 On-line CPU(s) list: 0 Thread(s) per core: 1 Core(s) per socket: 1 Socket(s): 1 Vendor ID: AuthenticAMD CPU family: 6 Model: 10 Model name: AMD Athlon(tm) XP 3000+ Stepping: 0 CPU MHz: 2162.773 BogoMIPS: 4325.54 L1d cache: 64 KiB L1i cache: 64 KiB L2 cache: 512 KiB Vulnerability Itlb multihit: Not affected Vulnerability L1tf: Not affected Vulnerability Mds: Not affected Vulnerability Meltdown: Not affected Vulnerability Spec store bypass: Vulnerable Vulnerability Spectre v1: Mitigation; usercopy/swapgs barriers and __user pointer sanitization Vulnerability Spectre v2: Mitigation; Retpolines, STIBP disabled, RSB filling Vulnerability Srbds: Not affected Vulnerability Tsx async abort: Not affected Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow cpuid 3dnowprefetch vmmcall
The expected details for the AMD Athlon XP 3000+. Since this is a single core processor the /proc/cpuinfo is not much different:
$ cat /proc/cpuinfo processor : 0 vendor_id : AuthenticAMD cpu family : 6 model : 10 model name : AMD Athlon(tm) XP 3000+ stepping : 0 cpu MHz : 2162.773 cache size : 512 KB physical id : 0 siblings : 1 core id : 0 cpu cores : 1 apicid : 0 initial apicid : 0 fdiv_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow cpuid 3dnowprefetch vmmcall bugs : fxsave_leak sysret_ss_attrs spectre_v1 spectre_v2 spec_store_bypass bogomips : 4325.54 clflush size : 32 cache_alignment : 32 address sizes : 34 bits physical, 32 bits virtual power management: ts
Still the Linux 5.10.0 kernel reports more CPU details than seen in earlier kernel versions.
/proc/meminfo
Memory information:
$ cat /proc/meminfo MemTotal: 2061768 kB MemFree: 1702720 kB MemAvailable: 1709048 kB Buffers: 23288 kB Cached: 183424 kB SwapCached: 0 kB Active: 64200 kB Inactive: 234004 kB Active(anon): 808 kB Inactive(anon): 95432 kB Active(file): 63392 kB Inactive(file): 138572 kB Unevictable: 0 kB Mlocked: 0 kB HighTotal: 1195976 kB HighFree: 907964 kB LowTotal: 865792 kB LowFree: 794756 kB SwapTotal: 999420 kB SwapFree: 999420 kB Dirty: 12 kB Writeback: 0 kB AnonPages: 87424 kB Mapped: 102956 kB Shmem: 4740 kB KReclaimable: 17320 kB Slab: 32564 kB SReclaimable: 17320 kB SUnreclaim: 15244 kB KernelStack: 1672 kB PageTables: 3760 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 2030304 kB Committed_AS: 1112620 kB VmallocTotal: 122880 kB VmallocUsed: 6896 kB VmallocChunk: 0 kB Percpu: 316 kB HardwareCorrupted: 0 kB AnonHugePages: 20480 kB ShmemHugePages: 0 kB ShmemPmdMapped: 0 kB FileHugePages: 0 kB FilePmdMapped: 0 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB Hugetlb: 0 kB DirectMap4k: 28664 kB DirectMap2M: 872448 kB
Shows the expected 2 GiB of installed memory.
lspci & /proc/bus/pci/devices
List PCI devices:
$ lspci 00:00.0 Host bridge: NVIDIA Corporation nForce2 IGP2 (rev a2) 00:00.1 RAM memory: NVIDIA Corporation nForce2 Memory Controller 1 (rev a2) 00:00.2 RAM memory: NVIDIA Corporation nForce2 Memory Controller 4 (rev a2) 00:00.3 RAM memory: NVIDIA Corporation nForce2 Memory Controller 3 (rev a2) 00:00.4 RAM memory: NVIDIA Corporation nForce2 Memory Controller 2 (rev a2) 00:00.5 RAM memory: NVIDIA Corporation nForce2 Memory Controller 5 (rev a2) 00:01.0 ISA bridge: NVIDIA Corporation nForce2 ISA Bridge (rev a3) 00:01.1 SMBus: NVIDIA Corporation nForce2 SMBus (MCP) (rev a2) 00:02.0 USB controller: NVIDIA Corporation nForce2 USB Controller (rev a3) 00:02.1 USB controller: NVIDIA Corporation nForce2 USB Controller (rev a3) 00:02.2 USB controller: NVIDIA Corporation nForce2 USB Controller (rev a3) 00:04.0 Ethernet controller: NVIDIA Corporation nForce2 Ethernet Controller (rev a1) 00:05.0 Multimedia audio controller: NVIDIA Corporation nForce Audio Processing Unit (rev a2) 00:06.0 Multimedia audio controller: NVIDIA Corporation nForce2 AC97 Audio Controler (MCP) (rev a1) 00:08.0 PCI bridge: NVIDIA Corporation nForce2 External PCI Bridge (rev a3) 00:09.0 IDE interface: NVIDIA Corporation nForce2 IDE (rev a2) 00:0c.0 PCI bridge: NVIDIA Corporation nForce2 PCI Bridge (rev a3) 00:0d.0 FireWire (IEEE 1394): NVIDIA Corporation nForce2 FireWire (IEEE 1394) Controller (rev a3) 00:1e.0 PCI bridge: NVIDIA Corporation nForce2 AGP (rev a2) 01:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS) 01:0b.0 RAID bus controller: Silicon Image, Inc. SiI 3112 [SATALink/SATARaid] Serial ATA Controller (rev 02) 02:01.0 Ethernet controller: 3Com Corporation 3C920B-EMB Integrated Fast Ethernet Controller [Tornado] (rev 40) 03:00.0 VGA compatible controller: NVIDIA Corporation NV40 [GeForce 6800] (rev a1)
Lots of devices here... the NVIDIA nForce & nForce2 devices are provided by the mainboard chipset, with an additional 10 Mb/s ethernet card (Realtek) in a PCI slots, and an NVIDIA GeForce graphics card in the AGP slot. The raw PCI bus devices list hints at the associated drivers:
$ cat /proc/bus/pci/devices 0000 10de01e0 0 e0000008 0 0 0 0 0 0 4000000 0 0 0 0 0 0 agpgart-nvidia 0001 10de01eb 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0002 10de01ee 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0003 10de01ed 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0004 10de01ec 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0005 10de01ef 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0008 10de0060 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0009 10de0064 b e001 0 0 0 0 0 0 20 0 0 0 0 0 0 nForce2_smbus 0010 10de0067 16 eb087000 0 0 0 0 0 0 1000 0 0 0 0 0 0 ohci-pci 0011 10de0067 15 eb082000 0 0 0 0 0 0 1000 0 0 0 0 0 0 ohci-pci 0012 10de0068 14 eb083000 0 0 0 0 0 0 100 0 0 0 0 0 0 ehci-pci 0020 10de0066 16 eb086000 e401 0 0 0 0 0 1000 8 0 0 0 0 0 forcedeth 0028 10de006b b eb000000 0 0 0 0 0 0 80000 0 0 0 0 0 0 0030 10de006a 16 d001 d401 eb080000 0 0 0 0 100 80 1000 0 0 0 0 snd_intel8x0 0040 10de006c 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0048 10de0065 0 1f0 3f6 170 376 f001 0 0 8 0 8 0 10 0 0 pata_amd 0060 10de006d 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0068 10de006e 14 eb084000 eb085000 0 0 0 0 0 800 40 0 0 0 0 0 firewire_ohci 00f0 10de01e8 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0150 10ec8029 10 a001 0 0 0 0 0 0 20 0 0 0 0 0 0 ne2k-pci 0158 10953112 12 a401 a801 ac01 b001 b401 ea000000 80000000 8 4 8 4 10 200 80000 sata_sil 0208 10b79201 15 c001 e5000000 0 0 0 0 80100000 80 80 0 0 0 0 20000 3c59x 0300 10de0041 13 e6000000 c0000008 e7000000 0 0 0 c0002 1000000 20000000 1000000 0 0 0 20000 nouveau
For a more explicit connection between the cards and their drivers use lspci -v, although it has a lot more output.
lsusb
List USB devices:
$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Since there are no additional USB devices plugged into the system, the only visible devices are the root hubs.
lshw
A hardware report can be obtained using lshw from the "lshw" package (not installed by default):
$ sudo lshw
salix
description: Desktop Computer
product: A7N8X
vendor: ASUSTeK Computer INC.
version: REV 1.xx
serial: xxxxxxxxxxx
width: 32 bits
capabilities: smbios-2.2 dmi-2.2 smp
configuration: boot=normal chassis=desktop
*-core
description: Motherboard
product: A7N8X
vendor: ASUSTeK Computer INC.
physical id: 0
version: REV 1.xx
serial: xxxxxxxxxxx
*-firmware
description: BIOS
vendor: Phoenix Technologies, LTD
physical id: 0
version: ASUS A7N8X Deluxe ACPI BIOS Rev 1008
date: 03/29/2004
size: 64KiB
capacity: 512KiB
capabilities: pci pnp apm upgrade shadowing cdboot bootselect socketedrom edd int13floppy360 int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb agp ls120boot zipboot virtualmachine
*-cpu
description: CPU
product: AMD Athlon(tm) XP 3000+
vendor: Advanced Micro Devices [AMD]
physical id: 4
bus info: cpu@0
version: 6.10.0
slot: Socket A
size: 2166MHz
capacity: 3GHz
width: 32 bits
clock: 166MHz
capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow cpuid 3dnowprefetch vmmcall
*-cache:0
description: L1 cache
physical id: 9
slot: L1 Cache
size: 128KiB
capacity: 128KiB
capabilities: pipeline-burst synchronous internal write-back data
configuration: level=1
*-cache:1
description: L2 cache
physical id: a
slot: L2 Cache
size: 512KiB
capacity: 512KiB
capabilities: pipeline-burst synchronous external write-back data
configuration: level=2
*-memory
description: System Memory
physical id: 26
slot: System board or motherboard
size: 2GiB
*-bank:0
description: DIMM DRAM Synchronous [empty]
physical id: 0
slot: DDR1
width: 64 bits
*-bank:1
description: DIMM DRAM Synchronous
physical id: 1
slot: DDR2
size: 1GiB
width: 64 bits
*-bank:2
description: DIMM DRAM Synchronous
physical id: 2
slot: DDR3
size: 1GiB
width: 64 bits
*-pci
description: Host bridge
product: nForce2 IGP2
vendor: NVIDIA Corporation
physical id: 100
bus info: pci@0000:00:00.0
version: a2
width: 32 bits
clock: 66MHz
configuration: driver=agpgart-nvidia
resources: irq:0 memory:e0000000-e3ffffff
*-memory:0 UNCLAIMED
description: RAM memory
product: nForce2 Memory Controller 1
vendor: NVIDIA Corporation
physical id: 0.1
bus info: pci@0000:00:00.1
version: a2
width: 32 bits
clock: 66MHz (15.2ns)
configuration: latency=0
*-memory:1 UNCLAIMED
description: RAM memory
product: nForce2 Memory Controller 4
vendor: NVIDIA Corporation
physical id: 0.2
bus info: pci@0000:00:00.2
version: a2
width: 32 bits
clock: 66MHz (15.2ns)
configuration: latency=0
*-memory:2 UNCLAIMED
description: RAM memory
product: nForce2 Memory Controller 3
vendor: NVIDIA Corporation
physical id: 0.3
bus info: pci@0000:00:00.3
version: a2
width: 32 bits
clock: 66MHz (15.2ns)
configuration: latency=0
*-memory:3 UNCLAIMED
description: RAM memory
product: nForce2 Memory Controller 2
vendor: NVIDIA Corporation
physical id: 0.4
bus info: pci@0000:00:00.4
version: a2
width: 32 bits
clock: 66MHz (15.2ns)
configuration: latency=0
*-memory:4 UNCLAIMED
description: RAM memory
product: nForce2 Memory Controller 5
vendor: NVIDIA Corporation
physical id: 0.5
bus info: pci@0000:00:00.5
version: a2
width: 32 bits
clock: 66MHz (15.2ns)
configuration: latency=0
*-isa
description: ISA bridge
product: nForce2 ISA Bridge
vendor: NVIDIA Corporation
physical id: 1
bus info: pci@0000:00:01.0
version: a3
width: 32 bits
clock: 66MHz
capabilities: isa ht bus_master cap_list
configuration: latency=0
*-serial
description: SMBus
product: nForce2 SMBus (MCP)
vendor: NVIDIA Corporation
physical id: 1.1
bus info: pci@0000:00:01.1
version: a2
width: 32 bits
clock: 66MHz
capabilities: pm cap_list
configuration: driver=nForce2_smbus latency=0 maxlatency=1 mingnt=3
resources: irq:11 ioport:e000(size=32)
*-usb:0
description: USB controller
product: nForce2 USB Controller
vendor: NVIDIA Corporation
physical id: 2
bus info: pci@0000:00:02.0
version: a3
width: 32 bits
clock: 66MHz
capabilities: pm ohci bus_master cap_list
configuration: driver=ohci-pci latency=0 maxlatency=1 mingnt=3
resources: irq:22 memory:eb087000-eb087fff
*-usbhost
product: OHCI PCI host controller
vendor: Linux 5.10.0-13-686-pae ohci_hcd
physical id: 1
bus info: usb@2
logical name: usb2
version: 5.10
capabilities: usb-1.10
configuration: driver=hub slots=3 speed=12Mbit/s
*-usb:1
description: USB controller
product: nForce2 USB Controller
vendor: NVIDIA Corporation
physical id: 2.1
bus info: pci@0000:00:02.1
version: a3
width: 32 bits
clock: 66MHz
capabilities: pm ohci bus_master cap_list
configuration: driver=ohci-pci latency=0 maxlatency=1 mingnt=3
resources: irq:21 memory:eb082000-eb082fff
*-usbhost
product: OHCI PCI host controller
vendor: Linux 5.10.0-13-686-pae ohci_hcd
physical id: 1
bus info: usb@3
logical name: usb3
version: 5.10
capabilities: usb-1.10
configuration: driver=hub slots=3 speed=12Mbit/s
*-usb:2
description: USB controller
product: nForce2 USB Controller
vendor: NVIDIA Corporation
physical id: 2.2
bus info: pci@0000:00:02.2
version: a3
width: 32 bits
clock: 66MHz
capabilities: debug pm ehci bus_master cap_list
configuration: driver=ehci-pci latency=0 maxlatency=1 mingnt=3
resources: irq:20 memory:eb083000-eb0830ff
*-usbhost
product: EHCI Host Controller
vendor: Linux 5.10.0-13-686-pae ehci_hcd
physical id: 1
bus info: usb@1
logical name: usb1
version: 5.10
capabilities: usb-2.00
configuration: driver=hub slots=6 speed=480Mbit/s
*-usb
description: Mass storage device
product: Flash Disk
vendor: USB
physical id: 4
bus info: usb@1:4
logical name: scsi4
version: 11.00
serial: AA04012700043674
capabilities: usb-2.00 scsi emulated
configuration: driver=usb-storage maxpower=100mA speed=480Mbit/s
*-disk
description: SCSI Disk
product: Flash Disk
vendor: USB
physical id: 0.0.0
bus info: scsi@4:0.0.0
logical name: /dev/sdb
version: 1100
size: 478MiB (501MB)
capabilities: partitioned partitioned:dos
configuration: logicalsectorsize=512 sectorsize=512 signature=2a6b8479
*-volume
description: Windows FAT volume
vendor: MSDOS5.0
physical id: 1
bus info: scsi@4:0.0.0,1
logical name: /dev/sdb1
version: FAT16
serial: 7478-b8b8
size: 474MiB
capacity: 475MiB
capabilities: primary fat initialized
configuration: FATs=2 filesystem=fat label=USB_512M
*-network
description: Ethernet interface
product: nForce2 Ethernet Controller
vendor: NVIDIA Corporation
physical id: 4
bus info: pci@0000:00:04.0
logical name: enp0s4
version: a1
serial: 00:0c:6e:06:31:18
size: 100Mbit/s
capacity: 100Mbit/s
width: 32 bits
clock: 66MHz
capabilities: pm bus_master cap_list ethernet physical mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=forcedeth driverversion=0.64 duplex=full ip=192.168.1.138 latency=0 link=yes maxlatency=20 mingnt=1 multicast=yes port=MII speed=100Mbit/s
resources: irq:22 memory:eb086000-eb086fff ioport:e400(size=8)
*-multimedia:0 UNCLAIMED
description: Multimedia audio controller
product: nForce Audio Processing Unit
vendor: NVIDIA Corporation
physical id: 5
bus info: pci@0000:00:05.0
version: a2
width: 32 bits
clock: 66MHz
capabilities: pm bus_master cap_list
configuration: latency=0 maxlatency=12 mingnt=1
resources: memory:eb000000-eb07ffff
*-multimedia:1
description: Multimedia audio controller
product: nForce2 AC97 Audio Controler (MCP)
vendor: NVIDIA Corporation
physical id: 6
bus info: pci@0000:00:06.0
version: a1
width: 32 bits
clock: 66MHz
capabilities: pm bus_master cap_list
configuration: driver=snd_intel8x0 latency=0 maxlatency=5 mingnt=2
resources: irq:22 ioport:d000(size=256) ioport:d400(size=128) memory:eb080000-eb080fff
*-pci:0
description: PCI bridge
product: nForce2 External PCI Bridge
vendor: NVIDIA Corporation
physical id: 8
bus info: pci@0000:00:08.0
version: a3
width: 32 bits
clock: 66MHz
capabilities: pci normal_decode bus_master
resources: ioport:a000(size=8192) memory:e9000000-eaffffff memory:80000000-800fffff
*-network
description: Ethernet interface
product: RTL-8029(AS)
vendor: Realtek Semiconductor Co., Ltd.
physical id: a
bus info: pci@0000:01:0a.0
logical name: enp1s10
version: 00
serial: 00:10:a7:0e:38:a0
width: 32 bits
clock: 33MHz
capabilities: ethernet physical
configuration: broadcast=yes driver=ne2k-pci driverversion=1.03 latency=0 multicast=yes
resources: irq:16 ioport:a000(size=32)
*-raid
description: RAID bus controller
product: SiI 3112 [SATALink/SATARaid] Serial ATA Controller
vendor: Silicon Image, Inc.
physical id: b
bus info: pci@0000:01:0b.0
version: 02
width: 32 bits
clock: 66MHz
capabilities: raid pm bus_master cap_list rom
configuration: driver=sata_sil latency=32
resources: irq:18 ioport:a400(size=8) ioport:a800(size=4) ioport:ac00(size=8) ioport:b000(size=4) ioport:b400(size=16) memory:ea000000-ea0001ff memory:80000000-8007ffff
*-ide
description: IDE interface
product: nForce2 IDE
vendor: NVIDIA Corporation
physical id: 9
bus info: pci@0000:00:09.0
logical name: scsi0
logical name: scsi3
version: a2
width: 32 bits
clock: 66MHz
capabilities: ide pm isa_compat_mode pci_native_mode bus_master cap_list emulated
configuration: driver=pata_amd latency=0 maxlatency=1 mingnt=3
resources: irq:0 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8) ioport:376 ioport:f000(size=16)
*-disk
description: ATA Disk
product: Maxtor 6Y080L0
vendor: Maxtor
physical id: 0.0.0
bus info: scsi@0:0.0.0
logical name: /dev/sda
version: 1BW0
serial: Y2VEK20E
size: 76GiB (81GB)
capabilities: partitioned partitioned:dos
configuration: ansiversion=5 logicalsectorsize=512 sectorsize=512 signature=9021df6f
*-volume:0
description: EXT4 volume
vendor: Linux
physical id: 1
bus info: scsi@0:0.0.0,1
logical name: /dev/sda1
logical name: /
version: 1.0
serial: 83736664-029b-4caa-ab96-122c9ed260dc
size: 75GiB
capacity: 75GiB
capabilities: primary bootable journaled extended_attributes large_files huge_files dir_nlink 64bit extents ext4 ext2 initialized
configuration: created=2022-03-26 14:48:16 filesystem=ext4 lastmountpoint=/ modified=2022-03-27 09:42:06 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro mounted=2022-03-26 15:28:53 state=mounted
*-volume:1
description: Extended partition
physical id: 2
bus info: scsi@0:0.0.0,2
logical name: /dev/sda2
size: 976MiB
capacity: 976MiB
capabilities: primary extended partitioned partitioned:extended
*-logicalvolume
description: Linux swap volume
physical id: 5
logical name: /dev/sda5
version: 1
serial: 2cdb3f94-77f9-46c2-844b-d404b201f53d
size: 976MiB
capacity: 976MiB
capabilities: nofs swap initialized
configuration: filesystem=swap pagesize=4096
*-cdrom
description: DVD writer
product: DVDRW SHW-160P6S
vendor: LITE-ON
physical id: 0.1.0
bus info: scsi@3:0.1.0
logical name: /dev/cdrom
logical name: /dev/cdrw
logical name: /dev/dvd
logical name: /dev/dvdrw
logical name: /dev/sr0
version: PS0B
capabilities: removable audio cd-r cd-rw dvd dvd-r
configuration: ansiversion=5 status=nodisc
*-pci:1
description: PCI bridge
product: nForce2 PCI Bridge
vendor: NVIDIA Corporation
physical id: c
bus info: pci@0000:00:0c.0
version: a3
width: 32 bits
clock: 66MHz
capabilities: pci normal_decode bus_master
resources: ioport:c000(size=4096) memory:e4000000-e5ffffff memory:80100000-801fffff
*-network
description: Ethernet interface
product: 3C920B-EMB Integrated Fast Ethernet Controller [Tornado]
vendor: 3Com Corporation
physical id: 1
bus info: pci@0000:02:01.0
logical name: enp2s1
version: 40
serial: 00:e0:18:f1:e6:3b
size: 10Mbit/s
capacity: 100Mbit/s
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=3c59x driverversion=5.10.0-13-686-pae duplex=half latency=32 link=no maxlatency=10 mingnt=10 multicast=yes port=MII speed=10Mbit/s
resources: irq:21 ioport:c000(size=128) memory:e5000000-e500007f memory:80100000-8011ffff
*-firewire
description: FireWire (IEEE 1394)
product: nForce2 FireWire (IEEE 1394) Controller
vendor: NVIDIA Corporation
physical id: d
bus info: pci@0000:00:0d.0
version: a3
width: 32 bits
clock: 66MHz
capabilities: pm ohci bus_master cap_list
configuration: driver=firewire_ohci latency=0 maxlatency=1 mingnt=3
resources: irq:20 memory:eb084000-eb0847ff memory:eb085000-eb08503f
*-pci:2
description: PCI bridge
product: nForce2 AGP
vendor: NVIDIA Corporation
physical id: 1e
bus info: pci@0000:00:1e.0
version: a2
width: 32 bits
clock: 66MHz
capabilities: pci normal_decode bus_master
resources: memory:e6000000-e8ffffff memory:c0000000-dfffffff
*-display
description: VGA compatible controller
product: NV40 [GeForce 6800]
vendor: NVIDIA Corporation
physical id: 0
bus info: pci@0000:03:00.0
version: a1
width: 32 bits
clock: 66MHz
capabilities: pm agp agp-3.0 vga_controller bus_master cap_list rom
configuration: driver=nouveau latency=32 maxlatency=1 mingnt=5
resources: irq:19 memory:e6000000-e6ffffff memory:c0000000-dfffffff memory:e7000000-e7ffffff memory:c0000-dffff
*-pnp00:00
product: PnP device PNP0c02
physical id: 1
capabilities: pnp
configuration: driver=system
*-pnp00:01
product: PnP device PNP0c02
physical id: 2
capabilities: pnp
configuration: driver=system
*-pnp00:02
product: PnP device PNP0c01
physical id: 3
capabilities: pnp
configuration: driver=system
*-pnp00:03
product: PnP device PNP0c02
physical id: 5
capabilities: pnp
configuration: driver=system
*-pnp00:04
product: PnP device PNP0b00
physical id: 6
capabilities: pnp
configuration: driver=rtc_cmos
*-pnp00:05
product: PnP device PNP0700
physical id: 7
capabilities: pnp
*-pnp00:06
product: PnP device PNP0501
physical id: 8
capabilities: pnp
configuration: driver=serial
*-pnp00:07
product: PnP device PNP0501
physical id: 9
capabilities: pnp
configuration: driver=serial
*-pnp00:08
product: PnP device PNP0401
physical id: a
capabilities: pnp
configuration: driver=parport_pc
*-pnp00:09
product: PnP device PNP0f13
physical id: b
capabilities: pnp
configuration: driver=i8042 aux
*-pnp00:0a
product: PnP device PNP0303
physical id: c
capabilities: pnp
configuration: driver=i8042 kbd
*-pnp00:0b
product: PnP device PNPb006
physical id: d
capabilities: pnp
configuration: driver=mpu401
*-pnp00:0c
product: PnP device PNPb02f
physical id: e
capabilities: pnp
configuration: driver=ns558
Lots of detail here about the various components present in the system presented in a tree describing the relationships.
dmesg
System message log:
$ sudo dmesg | cat [ 0.000000] Linux version 5.10.0-13-686-pae (debian-kernel@lists.debian.org) (gcc-10 (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Debian 5.10.106-1 (2022-03-17) [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffeffff] usable [ 0.000000] BIOS-e820: [mem 0x000000007fff0000-0x000000007fff2fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007fff3000-0x000000007fffffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffff0000-0x00000000ffffffff] reserved [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU! [ 0.000000] SMBIOS 2.2 present. [ 0.000000] DMI: ASUSTeK Computer INC. A7N8X/A7N8X, BIOS ASUS A7N8X Deluxe ACPI BIOS Rev 1008 03/29/2004 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2162.773 MHz processor [ 0.005101] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.005108] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.005119] last_pfn = 0x7fff0 max_arch_pfn = 0x1000000 [ 0.005128] MTRR default type: uncachable [ 0.005130] MTRR fixed ranges enabled: [ 0.005134] 00000-9FFFF write-back [ 0.005136] A0000-BFFFF uncachable [ 0.005139] C0000-C7FFF write-protect [ 0.005142] C8000-FFFFF uncachable [ 0.005144] MTRR variable ranges enabled: [ 0.005147] 0 base 000000000 mask F80000000 write-back [ 0.005150] 1 base 0E0000000 mask FFC000000 write-combining [ 0.005152] 2 disabled [ 0.005154] 3 disabled [ 0.005156] 4 disabled [ 0.005158] 5 disabled [ 0.005160] 6 disabled [ 0.005161] 7 disabled [ 0.005502] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.051152] initial memory mapped: [mem 0x00000000-0x1b1fffff] [ 0.051260] RAMDISK: [mem 0x33c25000-0x35e09fff] [ 0.051267] ACPI: Early table checksum verification disabled [ 0.051279] ACPI: RSDP 0x00000000000F6D60 000014 (v00 Nvidia) [ 0.051288] ACPI: RSDT 0x000000007FFF3000 00002C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000) [ 0.051300] ACPI: FACP 0x000000007FFF3040 000074 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000) [ 0.051312] ACPI: DSDT 0x000000007FFF30C0 0043F8 (v01 NVIDIA AWRDACPI 00001000 MSFT 0100000E) [ 0.051320] ACPI: FACS 0x000000007FFF0000 000040 [ 0.051327] ACPI: APIC 0x000000007FFF74C0 00005A (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000) [ 0.051335] ACPI: Reserving FACP table memory at [mem 0x7fff3040-0x7fff30b3] [ 0.051338] ACPI: Reserving DSDT table memory at [mem 0x7fff30c0-0x7fff74b7] [ 0.051340] ACPI: Reserving FACS table memory at [mem 0x7fff0000-0x7fff003f] [ 0.051343] ACPI: Reserving APIC table memory at [mem 0x7fff74c0-0x7fff7519] [ 0.051364] ACPI: Local APIC address 0xfee00000 [ 0.051371] 1167MB HIGHMEM available. [ 0.051372] 879MB LOWMEM available. [ 0.051375] mapped low ram: 0 - 36ffe000 [ 0.051376] low ram: 0 - 36ffe000 [ 0.051385] Zone ranges: [ 0.051387] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.051391] Normal [mem 0x0000000001000000-0x0000000036ffdfff] [ 0.051394] HighMem [mem 0x0000000036ffe000-0x000000007ffeffff] [ 0.051398] Movable zone start for each node [ 0.051399] Early memory node ranges [ 0.051401] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.051404] node 0: [mem 0x0000000000100000-0x000000007ffeffff] [ 0.051407] Initmem setup node 0 [mem 0x0000000000001000-0x000000007ffeffff] [ 0.051411] On node 0 totalpages: 524174 [ 0.081095] DMA zone: 40 pages used for memmap [ 0.081099] DMA zone: 0 pages reserved [ 0.081101] DMA zone: 3998 pages, LIFO batch:0 [ 0.081107] Normal zone: 2160 pages used for memmap [ 0.081110] Normal zone: 221182 pages, LIFO batch:63 [ 0.081114] HighMem zone: 298994 pages, LIFO batch:63 [ 0.110764] Using APIC driver default [ 0.110809] Nvidia board detected. Ignoring ACPI timer override. [ 0.110811] If you got timer trouble try acpi_use_timer_override [ 0.110958] ACPI: PM-Timer IO Port: 0x4008 [ 0.110962] ACPI: Local APIC address 0xfee00000 [ 0.110973] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.110987] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.110992] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.110994] ACPI: BIOS IRQ0 override ignored. [ 0.110996] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.111002] ACPI: IRQ9 used by override. [ 0.111006] Using ACPI (MADT) for SMP configuration information [ 0.111012] smpboot: Allowing 1 CPUs, 0 hotplug CPUs [ 0.111039] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.111043] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.111045] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.111047] PM: hibernation: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.111052] [mem 0x80000000-0xfebfffff] available for PCI devices [ 0.111054] Booting paravirtualized kernel on bare hardware [ 0.111061] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.111072] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1 [ 0.111498] percpu: Embedded 36 pages/cpu s116300 r0 d31156 u147456 [ 0.111509] pcpu-alloc: s116300 r0 d31156 u147456 alloc=36*4096 [ 0.111513] pcpu-alloc: [0] 0 [ 0.111549] Built 1 zonelists, mobility grouping on. Total pages: 521974 [ 0.111553] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.10.0-13-686-pae root=UUID=83736664-029b-4caa-ab96-122c9ed260dc ro quiet [ 0.112380] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.112754] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.112797] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.112804] Initializing HighMem for node 0 (00036ffe:0007fff0) [ 0.223621] Initializing Movable for node 0 (00000000:00000000) [ 0.233888] Memory: 2026144K/2096696K available (8288K kernel code, 1187K rwdata, 2496K rodata, 884K init, 488K bss, 70552K reserved, 0K cma-reserved, 1195976K highmem) [ 0.233891] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.233918] random: get_random_u32 called from __kmem_cache_create+0x23/0x440 with crng_init=0 [ 0.234272] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.234298] ftrace: allocating 33752 entries in 66 pages [ 0.251969] ftrace: allocated 66 pages with 2 groups [ 0.252521] rcu: Hierarchical RCU implementation. [ 0.252524] rcu: RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=1. [ 0.252527] Rude variant of Tasks RCU enabled. [ 0.252528] Tracing variant of Tasks RCU enabled. [ 0.252531] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.252533] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.267458] NR_IRQS: 2304, nr_irqs: 256, preallocated irqs: 16 [ 0.272246] Console: colour VGA+ 80x25 [ 0.272277] printk: console [tty0] enabled [ 0.272291] ACPI: Core revision 20200925 [ 0.272466] APIC: Switch to symmetric I/O mode setup [ 0.272471] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.273029] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.292439] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1f2cd3ed07e, max_idle_ns: 440795295307 ns [ 0.292451] Calibrating delay loop (skipped), value calculated using timer frequency.. 4325.54 BogoMIPS (lpj=8651092) [ 0.292457] pid_max: default: 32768 minimum: 301 [ 0.292534] LSM: Security Framework initializing [ 0.292560] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.292686] AppArmor: AppArmor initialized [ 0.292690] TOMOYO Linux initialized [ 0.292730] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.292742] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.293288] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.293291] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.293297] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.293300] Spectre V2 : Mitigation: Retpolines [ 0.293302] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.293304] Speculative Store Bypass: Vulnerable [ 0.305308] Freeing SMP alternatives memory: 32K [ 0.415039] smpboot: CPU0: AMD Athlon(tm) XP 3000+ (family: 0x6, model: 0xa, stepping: 0x0) [ 0.415381] Performance Events: AMD PMU driver. [ 0.415391] ... version: 0 [ 0.415392] ... bit width: 48 [ 0.415393] ... generic registers: 4 [ 0.415395] ... value mask: 0000ffffffffffff [ 0.415396] ... max period: 00007fffffffffff [ 0.415397] ... fixed-purpose events: 0 [ 0.415399] ... event mask: 000000000000000f [ 0.415546] rcu: Hierarchical SRCU implementation. [ 0.416179] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.416241] smp: Bringing up secondary CPUs ... [ 0.416244] smp: Brought up 1 node, 1 CPU [ 0.416246] smpboot: Max logical packages: 1 [ 0.416248] smpboot: Total of 1 processors activated (4325.54 BogoMIPS) [ 0.416444] devtmpfs: initialized [ 0.416444] PM: Registering ACPI NVS region [mem 0x7fff0000-0x7fff2fff] (12288 bytes) [ 0.416444] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.416444] futex hash table entries: 256 (order: 2, 16384 bytes, linear) [ 0.416444] pinctrl core: initialized pinctrl subsystem [ 0.416444] NET: Registered protocol family 16 [ 0.416444] audit: initializing netlink subsys (disabled) [ 0.416444] thermal_sys: Registered thermal governor 'fair_share' [ 0.416444] thermal_sys: Registered thermal governor 'bang_bang' [ 0.416444] thermal_sys: Registered thermal governor 'step_wise' [ 0.416444] thermal_sys: Registered thermal governor 'user_space' [ 0.416444] thermal_sys: Registered thermal governor 'power_allocator' [ 0.416444] cpuidle: using governor ladder [ 0.416444] cpuidle: using governor menu [ 0.416444] ACPI: bus type PCI registered [ 0.416444] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.416444] PCI: Using configuration type 1 for base access [ 0.417835] Kprobes globally optimized [ 0.417899] audit: type=2000 audit(1648370520.144:1): state=initialized audit_enabled=0 res=1 [ 0.418097] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 1.538023] ACPI: Added _OSI(Module Device) [ 1.538027] ACPI: Added _OSI(Processor Device) [ 1.538028] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.538030] ACPI: Added _OSI(Processor Aggregator Device) [ 1.538032] ACPI: Added _OSI(Linux-Dell-Video) [ 1.538034] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 1.538036] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 1.542212] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 1.544564] ACPI: Interpreter enabled [ 1.544600] ACPI: (supports S0 S1 S4 S5) [ 1.544604] ACPI: Using IOAPIC for interrupt routing [ 1.544653] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.545029] ACPI: Enabled 9 GPEs in block 00 to 1F [ 1.555750] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 1.555763] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI HPX-Type3] [ 1.555776] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 1.556154] PCI host bridge to bus 0000:00 [ 1.556159] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 1.556161] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.556164] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 1.556167] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 1.556169] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window] [ 1.556172] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.556213] pci 0000:00:00.0: [10de:01e0] type 00 class 0x060000 [ 1.556224] pci 0000:00:00.0: reg 0x10: [mem 0xe0000000-0xe3ffffff pref] [ 1.556248] pci 0000:00:00.0: nForce2 C1 Halt Disconnect fixup [ 1.556415] pci 0000:00:00.1: [10de:01eb] type 00 class 0x050000 [ 1.556572] pci 0000:00:00.2: [10de:01ee] type 00 class 0x050000 [ 1.556712] pci 0000:00:00.3: [10de:01ed] type 00 class 0x050000 [ 1.556854] pci 0000:00:00.4: [10de:01ec] type 00 class 0x050000 [ 1.556997] pci 0000:00:00.5: [10de:01ef] type 00 class 0x050000 [ 1.557149] pci 0000:00:01.0: [10de:0060] type 00 class 0x060100 [ 1.557378] pci 0000:00:01.1: [10de:0064] type 00 class 0x0c0500 [ 1.557393] pci 0000:00:01.1: reg 0x10: [io 0xe000-0xe01f] [ 1.557456] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 1.557644] pci 0000:00:02.0: [10de:0067] type 00 class 0x0c0310 [ 1.557659] pci 0000:00:02.0: reg 0x10: [mem 0xeb087000-0xeb087fff] [ 1.557722] pci 0000:00:02.0: supports D1 D2 [ 1.557725] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.557901] pci 0000:00:02.1: [10de:0067] type 00 class 0x0c0310 [ 1.557916] pci 0000:00:02.1: reg 0x10: [mem 0xeb082000-0xeb082fff] [ 1.557979] pci 0000:00:02.1: supports D1 D2 [ 1.557981] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 1.558146] pci 0000:00:02.2: [10de:0068] type 00 class 0x0c0320 [ 1.558161] pci 0000:00:02.2: reg 0x10: [mem 0xeb083000-0xeb0830ff] [ 1.558230] pci 0000:00:02.2: supports D1 D2 [ 1.558232] pci 0000:00:02.2: PME# supported from D0 D1 D2 D3hot D3cold [ 1.558415] pci 0000:00:04.0: [10de:0066] type 00 class 0x020000 [ 1.558430] pci 0000:00:04.0: reg 0x10: [mem 0xeb086000-0xeb086fff] [ 1.558439] pci 0000:00:04.0: reg 0x14: [io 0xe400-0xe407] [ 1.558495] pci 0000:00:04.0: supports D1 D2 [ 1.558497] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.558661] pci 0000:00:05.0: [10de:006b] type 00 class 0x040100 [ 1.558676] pci 0000:00:05.0: reg 0x10: [mem 0xeb000000-0xeb07ffff] [ 1.558737] pci 0000:00:05.0: supports D1 D2 [ 1.558895] pci 0000:00:06.0: [10de:006a] type 00 class 0x040100 [ 1.558910] pci 0000:00:06.0: reg 0x10: [io 0xd000-0xd0ff] [ 1.558919] pci 0000:00:06.0: reg 0x14: [io 0xd400-0xd47f] [ 1.558927] pci 0000:00:06.0: reg 0x18: [mem 0xeb080000-0xeb080fff] [ 1.558977] pci 0000:00:06.0: supports D1 D2 [ 1.559130] pci 0000:00:08.0: [10de:006c] type 01 class 0x060400 [ 1.559325] pci 0000:00:09.0: [10de:0065] type 00 class 0x01018a [ 1.559363] pci 0000:00:09.0: reg 0x20: [io 0xf000-0xf00f] [ 1.559381] pci 0000:00:09.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 1.559383] pci 0000:00:09.0: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 1.559385] pci 0000:00:09.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 1.559387] pci 0000:00:09.0: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 1.559579] pci 0000:00:0c.0: [10de:006d] type 01 class 0x060400 [ 1.559783] pci 0000:00:0d.0: [10de:006e] type 00 class 0x0c0010 [ 1.559798] pci 0000:00:0d.0: reg 0x10: [mem 0xeb084000-0xeb0847ff] [ 1.559807] pci 0000:00:0d.0: reg 0x14: [mem 0xeb085000-0xeb08503f] [ 1.559864] pci 0000:00:0d.0: supports D1 D2 [ 1.559866] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.560041] pci 0000:00:1e.0: [10de:01e8] type 01 class 0x060400 [ 1.560225] pci_bus 0000:01: extended config space not accessible [ 1.560280] pci 0000:01:0a.0: [10ec:8029] type 00 class 0x020000 [ 1.560300] pci 0000:01:0a.0: reg 0x10: [io 0xa000-0xa01f] [ 1.560431] pci 0000:01:0b.0: [1095:3112] type 00 class 0x010400 [ 1.560459] pci 0000:01:0b.0: reg 0x10: [io 0xa400-0xa407] [ 1.560470] pci 0000:01:0b.0: reg 0x14: [io 0xa800-0xa803] [ 1.560482] pci 0000:01:0b.0: reg 0x18: [io 0xac00-0xac07] [ 1.560493] pci 0000:01:0b.0: reg 0x1c: [io 0xb000-0xb003] [ 1.560504] pci 0000:01:0b.0: reg 0x20: [io 0xb400-0xb40f] [ 1.560516] pci 0000:01:0b.0: reg 0x24: [mem 0xea000000-0xea0001ff] [ 1.560528] pci 0000:01:0b.0: reg 0x30: [mem 0x00000000-0x0007ffff pref] [ 1.560563] pci 0000:01:0b.0: supports D1 D2 [ 1.560644] pci 0000:00:08.0: PCI bridge to [bus 01] [ 1.560649] pci 0000:00:08.0: bridge window [io 0xa000-0xbfff] [ 1.560654] pci 0000:00:08.0: bridge window [mem 0xe9000000-0xeaffffff] [ 1.560668] pci_bus 0000:02: extended config space not accessible [ 1.560705] pci 0000:02:01.0: [10b7:9201] type 00 class 0x020000 [ 1.560723] pci 0000:02:01.0: reg 0x10: [io 0xc000-0xc07f] [ 1.560735] pci 0000:02:01.0: reg 0x14: [mem 0xe5000000-0xe500007f] [ 1.560779] pci 0000:02:01.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 1.560820] pci 0000:02:01.0: supports D1 D2 [ 1.560822] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.560922] pci 0000:00:0c.0: PCI bridge to [bus 02] [ 1.560927] pci 0000:00:0c.0: bridge window [io 0xc000-0xcfff] [ 1.560931] pci 0000:00:0c.0: bridge window [mem 0xe4000000-0xe5ffffff] [ 1.560953] pci_bus 0000:03: extended config space not accessible [ 1.561004] pci 0000:03:00.0: [10de:0041] type 00 class 0x030000 [ 1.561019] pci 0000:03:00.0: reg 0x10: [mem 0xe6000000-0xe6ffffff] [ 1.561028] pci 0000:03:00.0: reg 0x14: [mem 0xc0000000-0xdfffffff pref] [ 1.561037] pci 0000:03:00.0: reg 0x18: [mem 0xe7000000-0xe7ffffff] [ 1.561063] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 1.561208] pci 0000:00:1e.0: PCI bridge to [bus 03] [ 1.561214] pci 0000:00:1e.0: bridge window [mem 0xe6000000-0xe8ffffff] [ 1.561218] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff pref] [ 1.561232] pci_bus 0000:00: on NUMA node 0 [ 1.561428] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 1.561530] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 1.561630] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 1.561728] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 1.561824] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 1.561924] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 1.562021] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 1.562118] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 1.562215] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 1.562312] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 1.562416] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 1.562515] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 1.562613] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 1.562710] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 1.562807] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 1.562903] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 1.563003] ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled. [ 1.563086] ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled. [ 1.563168] ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled. [ 1.563249] ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled. [ 1.563330] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. [ 1.563455] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled. [ 1.563581] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled. [ 1.563705] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled. [ 1.563829] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled. [ 1.563952] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled. [ 1.564075] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled. [ 1.564160] ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled. [ 1.564281] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled. [ 1.564404] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled. [ 1.564538] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled. [ 1.564663] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled. [ 1.565760] iommu: Default domain type: Translated [ 1.565863] pci 0000:03:00.0: vgaarb: setting as boot VGA device [ 1.565866] pci 0000:03:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 1.565869] pci 0000:03:00.0: vgaarb: bridge control possible [ 1.565870] vgaarb: loaded [ 1.566037] EDAC MC: Ver: 3.0.0 [ 1.566614] NetLabel: Initializing [ 1.566616] NetLabel: domain hash size = 128 [ 1.566618] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 1.566652] NetLabel: unlabeled traffic allowed by default [ 1.566655] PCI: Using ACPI for IRQ routing [ 1.566660] PCI: pci_cache_line_size set to 32 bytes [ 1.566725] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 1.566728] e820: reserve RAM buffer [mem 0x7fff0000-0x7fffffff] [ 1.566809] clocksource: Switched to clocksource tsc-early [ 1.591961] VFS: Disk quotas dquot_6.6.0 [ 1.592009] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.592263] AppArmor: AppArmor Filesystem Enabled [ 1.592314] pnp: PnP ACPI init [ 1.592746] system 00:00: [io 0x4000-0x407f] has been reserved [ 1.592750] system 00:00: [io 0x4080-0x40ff] has been reserved [ 1.592753] system 00:00: [io 0x4400-0x447f] has been reserved [ 1.592756] system 00:00: [io 0x4480-0x44ff] has been reserved [ 1.592758] system 00:00: [io 0x4200-0x427f] has been reserved [ 1.592761] system 00:00: [io 0x4280-0x42ff] has been reserved [ 1.592776] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.592836] system 00:01: [io 0x5000-0x503f] has been reserved [ 1.592840] system 00:01: [io 0x5500-0x553f] has been reserved [ 1.592849] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.593098] system 00:02: [mem 0x000d2800-0x000d3fff] has been reserved [ 1.593102] system 00:02: [mem 0x000f0000-0x000f7fff] could not be reserved [ 1.593105] system 00:02: [mem 0x000f8000-0x000fbfff] could not be reserved [ 1.593108] system 00:02: [mem 0x000fc000-0x000fffff] could not be reserved [ 1.593111] system 00:02: [mem 0x7fff0000-0x7fffffff] could not be reserved [ 1.593114] system 00:02: [mem 0xffff0000-0xffffffff] has been reserved [ 1.593117] system 00:02: [mem 0x00000000-0x0009ffff] could not be reserved [ 1.593120] system 00:02: [mem 0x00100000-0x7ffeffff] could not be reserved [ 1.593123] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved [ 1.593126] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved [ 1.593135] system 00:02: Plug and Play ACPI device, IDs PNP0c01 (active) [ 1.593912] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 1.593922] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.593977] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.594191] pnp 00:05: [dma 2] [ 1.594247] pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active) [ 1.594547] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 1.594865] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active) [ 1.595368] pnp 00:08: [dma 3] [ 1.595441] pnp 00:08: Plug and Play ACPI device, IDs PNP0401 (active) [ 1.595536] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active) [ 1.595610] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 1.595890] pnp 00:0b: Plug and Play ACPI device, IDs PNPb006 (active) [ 1.596142] pnp 00:0c: Plug and Play ACPI device, IDs PNPb02f (active) [ 1.596151] pnp: PnP ACPI: found 13 devices [ 1.596155] PnPBIOS: Disabled [ 1.633938] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 1.634084] NET: Registered protocol family 2 [ 1.634262] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.634667] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 1.634708] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 1.634794] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.634824] TCP: Hash tables configured (established 8192 bind 8192) [ 1.634949] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.634975] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.635032] NET: Registered protocol family 1 [ 1.635042] NET: Registered protocol family 44 [ 1.635098] pci 0000:00:08.0: BAR 15: assigned [mem 0x80000000-0x800fffff pref] [ 1.635103] pci 0000:00:0c.0: BAR 15: assigned [mem 0x80100000-0x801fffff pref] [ 1.635110] pci 0000:01:0b.0: BAR 6: assigned [mem 0x80000000-0x8007ffff pref] [ 1.635114] pci 0000:00:08.0: PCI bridge to [bus 01] [ 1.635118] pci 0000:00:08.0: bridge window [io 0xa000-0xbfff] [ 1.635125] pci 0000:00:08.0: bridge window [mem 0xe9000000-0xeaffffff] [ 1.635129] pci 0000:00:08.0: bridge window [mem 0x80000000-0x800fffff pref] [ 1.635136] pci 0000:02:01.0: BAR 6: assigned [mem 0x80100000-0x8011ffff pref] [ 1.635139] pci 0000:00:0c.0: PCI bridge to [bus 02] [ 1.635142] pci 0000:00:0c.0: bridge window [io 0xc000-0xcfff] [ 1.635147] pci 0000:00:0c.0: bridge window [mem 0xe4000000-0xe5ffffff] [ 1.635151] pci 0000:00:0c.0: bridge window [mem 0x80100000-0x801fffff pref] [ 1.635159] pci 0000:03:00.0: BAR 6: assigned [mem 0xe8000000-0xe801ffff pref] [ 1.635161] pci 0000:00:1e.0: PCI bridge to [bus 03] [ 1.635166] pci 0000:00:1e.0: bridge window [mem 0xe6000000-0xe8ffffff] [ 1.635170] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff pref] [ 1.635177] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 1.635179] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 1.635181] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 1.635184] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window] [ 1.635186] pci_bus 0000:00: resource 8 [mem 0x80000000-0xfebfffff window] [ 1.635189] pci_bus 0000:01: resource 0 [io 0xa000-0xbfff] [ 1.635191] pci_bus 0000:01: resource 1 [mem 0xe9000000-0xeaffffff] [ 1.635194] pci_bus 0000:01: resource 2 [mem 0x80000000-0x800fffff pref] [ 1.635196] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff] [ 1.635199] pci_bus 0000:02: resource 1 [mem 0xe4000000-0xe5ffffff] [ 1.635201] pci_bus 0000:02: resource 2 [mem 0x80100000-0x801fffff pref] [ 1.635204] pci_bus 0000:03: resource 1 [mem 0xe6000000-0xe8ffffff] [ 1.635206] pci_bus 0000:03: resource 2 [mem 0xc0000000-0xdfffffff pref] [ 1.635700] PCI Interrupt Link [APCF] enabled at IRQ 22 [ 1.636097] PCI Interrupt Link [APCG] enabled at IRQ 21 [ 1.636445] PCI Interrupt Link [APCL] enabled at IRQ 20 [ 1.636617] pci 0000:03:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.636621] PCI: CLS 32 bytes, default 32 [ 1.636812] Trying to unpack rootfs image as initramfs... [ 2.664123] Freeing initrd memory: 34708K [ 2.665081] Initialise system trusted keyrings [ 2.665102] Key type blacklist registered [ 2.665207] workingset: timestamp_bits=14 max_order=19 bucket_order=5 [ 2.667590] zbud: loaded [ 2.667913] integrity: Platform Keyring initialized [ 2.667918] Key type asymmetric registered [ 2.667920] Asymmetric key parser 'x509' registered [ 2.668214] bounce: pool size: 64 pages [ 2.668281] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 2.668420] io scheduler mq-deadline registered [ 2.668858] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 2.669273] isapnp: Scanning for PnP cards... [ 3.023527] isapnp: No Plug & Play device found [ 3.023684] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 3.023900] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 3.024511] 00:07: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 3.025344] Linux agpgart interface v0.103 [ 3.025460] agpgart: Detected NVIDIA nForce2 chipset [ 3.029849] agpgart-nvidia 0000:00:00.0: AGP aperture is 64M @ 0xe0000000 [ 3.030175] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 3.033279] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.033289] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 3.033532] mousedev: PS/2 mouse device common for all mice [ 3.033614] rtc_cmos 00:04: RTC can wake from S4 [ 3.033873] rtc_cmos 00:04: registered as rtc0 [ 3.033903] rtc_cmos 00:04: setting system clock to 2022-03-27T08:42:03 UTC (1648370523) [ 3.033943] rtc_cmos 00:04: alarms up to one year, y3k, 242 bytes nvram [ 3.033978] ledtrig-cpu: registered to indicate activity on CPUs [ 3.034671] NET: Registered protocol family 10 [ 3.052936] Segment Routing with IPv6 [ 3.052984] mip6: Mobile IPv6 [ 3.052990] NET: Registered protocol family 17 [ 3.053056] mpls_gso: MPLS GSO support [ 3.053254] IPI shorthand broadcast: enabled [ 3.053266] sched_clock: Marking stable (3051842533, 616538)->(3053390206, -931135) [ 3.053426] registered taskstats version 1 [ 3.053436] Loading compiled-in X.509 certificates [ 3.060978] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 3.309856] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 3.309892] Loaded X.509 cert 'Debian Secure Boot Signer 2021 - linux: 4b6ef5abca669825178e052c84667ccbc0531f8c' [ 3.309953] zswap: loaded using pool lzo/zbud [ 3.310182] Key type ._fscrypt registered [ 3.310184] Key type .fscrypt registered [ 3.310186] Key type fscrypt-provisioning registered [ 3.310255] AppArmor: AppArmor sha1 policy hashing enabled [ 3.313161] Freeing unused kernel image (initmem) memory: 884K [ 3.320516] Write protecting kernel text and read-only data: 10788k [ 3.320527] Run /init as init process [ 3.320530] with arguments: [ 3.320531] /init [ 3.320532] with environment: [ 3.320534] HOME=/ [ 3.320535] TERM=linux [ 3.320537] BOOT_IMAGE=/boot/vmlinuz-5.10.0-13-686-pae [ 3.520887] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 3.522578] ACPI: Power Button [PWRB] [ 3.535738] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 3.546578] Floppy drive(s): fd0 is 1.44M [ 3.548573] ACPI: Power Button [PWRF] [ 3.568255] FDC 0 is a post-1991 82077 [ 3.619320] PCI Interrupt Link [APC1] enabled at IRQ 16 [ 3.619769] ne2k-pci 0000:01:0a.0 eth0: RealTek RTL-8029(AS) found at 0xa000, IRQ 16, 00:10:a7:0e:38:a0. [ 3.653686] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 3.654064] PCI Interrupt Link [APCH] enabled at IRQ 22 [ 3.670031] i2c i2c-0: nForce2 SMBus adapter at 0x5000 [ 3.670073] i2c i2c-1: nForce2 SMBus adapter at 0x5500 [ 3.682905] PCI Interrupt Link [AP3C] enabled at IRQ 21 [ 3.682969] 3c59x: Donald Becker and others. [ 3.682984] 0000:02:01.0: 3Com PCI 3c920 Tornado at (ptrval). [ 3.705005] tsc: Refined TSC clocksource calibration: 2162.730 MHz [ 3.705012] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1f2cab5a30c, max_idle_ns: 440795288403 ns [ 3.705036] clocksource: Switched to clocksource tsc [ 3.727123] ACPI: bus type USB registered [ 3.727189] usbcore: registered new interface driver usbfs [ 3.727209] usbcore: registered new interface driver hub [ 3.727236] usbcore: registered new device driver usb [ 3.738371] SCSI subsystem initialized [ 3.777032] PCI Interrupt Link [APCM] enabled at IRQ 20 [ 3.793963] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.819768] ehci-pci: EHCI PCI platform driver [ 3.820029] ehci-pci 0000:00:02.2: EHCI Host Controller [ 3.820044] ehci-pci 0000:00:02.2: new USB bus registered, assigned bus number 1 [ 3.820062] ehci-pci 0000:00:02.2: debug port 1 [ 3.820117] ehci-pci 0000:00:02.2: selective suspend/wakeup unavailable [ 3.820123] ehci-pci 0000:00:02.2: cache line size of 32 is not supported [ 3.820137] ehci-pci 0000:00:02.2: irq 20, io mem 0xeb083000 [ 3.829095] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.832557] ehci-pci 0000:00:02.2: USB 2.0 started, EHCI 1.00 [ 3.832697] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 3.832700] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.832703] usb usb1: Product: EHCI Host Controller [ 3.832705] usb usb1: Manufacturer: Linux 5.10.0-13-686-pae ehci_hcd [ 3.832707] usb usb1: SerialNumber: 0000:00:02.2 [ 3.832981] hub 1-0:1.0: USB hub found [ 3.832997] hub 1-0:1.0: 6 ports detected [ 3.836551] firewire_ohci 0000:00:0d.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x0 [ 3.855473] libata version 3.00 loaded. [ 3.859280] pata_amd 0000:00:09.0: version 0.4.1 [ 3.862043] ohci-pci: OHCI PCI platform driver [ 3.879366] ohci-pci 0000:00:02.0: OHCI PCI host controller [ 3.879390] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 3.879461] ohci-pci 0000:00:02.0: irq 22, io mem 0xeb087000 [ 3.880172] sata_sil 0000:01:0b.0: version 2.4 [ 3.880716] PCI Interrupt Link [APC3] enabled at IRQ 18 [ 3.889848] scsi host1: sata_sil [ 3.892621] scsi host0: pata_amd [ 3.895081] ne2k-pci 0000:01:0a.0 enp1s10: renamed from eth0 [ 3.901404] scsi host2: sata_sil [ 3.901527] ata3: SATA max UDMA/100 mmio m512@0xea000000 tf 0xea000080 irq 18 [ 3.901531] ata4: SATA max UDMA/100 mmio m512@0xea000000 tf 0xea0000c0 irq 18 [ 3.902483] scsi host3: pata_amd [ 3.902577] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 3.902580] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 3.938557] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10 [ 3.938564] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.938567] usb usb2: Product: OHCI PCI host controller [ 3.938569] usb usb2: Manufacturer: Linux 5.10.0-13-686-pae ohci_hcd [ 3.938571] usb usb2: SerialNumber: 0000:00:02.0 [ 3.938825] hub 2-0:1.0: USB hub found [ 3.938842] hub 2-0:1.0: 3 ports detected [ 3.939330] ohci-pci 0000:00:02.1: OHCI PCI host controller [ 3.939341] ohci-pci 0000:00:02.1: new USB bus registered, assigned bus number 3 [ 3.939400] ohci-pci 0000:00:02.1: irq 21, io mem 0xeb082000 [ 3.998532] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10 [ 3.998536] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.998539] usb usb3: Product: OHCI PCI host controller [ 3.998541] usb usb3: Manufacturer: Linux 5.10.0-13-686-pae ohci_hcd [ 3.998543] usb usb3: SerialNumber: 0000:00:02.1 [ 3.998787] hub 3-0:1.0: USB hub found [ 3.998803] hub 3-0:1.0: 3 ports detected [ 4.071232] ata1.00: HPA detected: current 160084415, native 160086528 [ 4.071241] ata1.00: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133 [ 4.071243] ata1.00: 160084415 sectors, multi 16: LBA [ 4.071256] ata1: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f, BIOS=0x7f000 (0xc70000c5) ACPI=0x7f01f (15:600:0x13) [ 4.190288] forcedeth 0000:00:04.0: ifname eth1, PHY OUI 0x732 @ 1, addr 00:0c:6e:06:31:18 [ 4.190292] forcedeth 0000:00:04.0: timirq lnktim desc-v1 [ 4.214683] ata3: SATA link down (SStatus 0 SControl 310) [ 4.506894] psmouse serio1: trackpoint: IBM TrackPoint firmware: 0x0b, buttons: 3/3 [ 4.521098] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input4 [ 4.526832] ata4: SATA link down (SStatus 0 SControl 310) [ 4.527118] scsi 0:0:0:0: Direct-Access ATA Maxtor 6Y080L0 1BW0 PQ: 0 ANSI: 5 [ 4.896789] ata2.01: ATAPI: LITE-ON DVDRW SHW-160P6S, PS0B, max UDMA/66 [ 4.896803] ata2: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc70000c5) ACPI=0x1f01f (600:30:0x1c) [ 4.896805] ata2.01: limited to UDMA/33 due to 40-wire cable [ 4.922166] scsi 3:0:1:0: CD-ROM LITE-ON DVDRW SHW-160P6S PS0B PQ: 0 ANSI: 5 [ 4.962182] 3c59x 0000:02:01.0 enp2s1: renamed from eth0 [ 4.966344] forcedeth 0000:00:04.0 enp0s4: renamed from eth1 [ 5.020916] sd 0:0:0:0: [sda] 160084415 512-byte logical blocks: (82.0 GB/76.3 GiB) [ 5.020942] sd 0:0:0:0: [sda] Write Protect is off [ 5.020946] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.020979] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.026412] sr 3:0:1:0: [sr0] scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 5.026420] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 5.052859] sda: sda1 sda2 < sda5 > [ 5.060515] sr 3:0:1:0: Attached scsi CD-ROM sr0 [ 5.064751] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.181804] PCI Interrupt Link [APC4] enabled at IRQ 19 [ 5.181968] nouveau 0000:03:00.0: vgaarb: deactivate vga console [ 5.183903] Console: switching to colour dummy device 80x25 [ 5.184294] nouveau 0000:03:00.0: NVIDIA NV40 (440100a1) [ 5.278228] nouveau 0000:03:00.0: bios: version 05.40.02.41.00 [ 5.279180] agpgart-nvidia 0000:00:00.0: AGP 3.0 bridge [ 5.279198] agpgart: systemd-udevd tried to set rate=x12. Setting to AGP3 x8 mode. [ 5.279204] agpgart-nvidia 0000:00:00.0: putting AGP V3 device into 8x mode [ 5.279254] nouveau 0000:03:00.0: putting AGP V3 device into 8x mode [ 5.279380] agpgart-nvidia 0000:00:00.0: AGP 3.0 bridge [ 5.279389] agpgart: systemd-udevd tried to set rate=x12. Setting to AGP3 x8 mode. [ 5.279393] agpgart-nvidia 0000:00:00.0: putting AGP V3 device into 8x mode [ 5.279440] nouveau 0000:03:00.0: putting AGP V3 device into 8x mode [ 5.279456] nouveau 0000:03:00.0: tmr: unknown input clock freq [ 5.279621] nouveau 0000:03:00.0: fb: 512 MiB DDR1 [ 5.312902] random: fast init done [ 5.340693] [TTM] Zone kernel: Available graphics memory: 432896 KiB [ 5.340698] [TTM] Zone highmem: Available graphics memory: 1030884 KiB [ 5.340700] [TTM] Initializing pool allocator [ 5.340709] [TTM] Initializing DMA pool allocator [ 5.340739] nouveau 0000:03:00.0: DRM: VRAM: 506 MiB [ 5.340742] nouveau 0000:03:00.0: DRM: GART: 64 MiB [ 5.340748] nouveau 0000:03:00.0: DRM: TMDS table version 1.1 [ 5.340751] nouveau 0000:03:00.0: DRM: DCB version 3.0 [ 5.340755] nouveau 0000:03:00.0: DRM: DCB outp 00: 01000300 00000028 [ 5.340759] nouveau 0000:03:00.0: DRM: DCB outp 01: 02011310 00000028 [ 5.340761] nouveau 0000:03:00.0: DRM: DCB outp 02: 01011312 00000000 [ 5.340764] nouveau 0000:03:00.0: DRM: DCB outp 03: 020223f1 0080c030 [ 5.340767] nouveau 0000:03:00.0: DRM: DCB conn 00: 1000 [ 5.340770] nouveau 0000:03:00.0: DRM: DCB conn 01: 1130 [ 5.340772] nouveau 0000:03:00.0: DRM: DCB conn 02: 0212 [ 5.342011] nouveau 0000:03:00.0: DRM: MM: using M2MF for buffer copies [ 5.350326] nouveau 0000:03:00.0: DRM: Saving VGA fonts [ 5.423639] nouveau 0000:03:00.0: DRM: unknown connector type 12 [ 5.428343] nouveau 0000:03:00.0: DRM: Setting dpms mode 3 on TV encoder (output 3) [ 5.544789] nouveau 0000:03:00.0: DRM: allocated 1280x1024 fb: 0x9000, bo (ptrval) [ 5.577428] fbcon: nouveaudrmfb (fb0) is primary device [ 5.680710] Console: switching to colour frame buffer device 160x64 [ 5.797151] nouveau 0000:03:00.0: [drm] fb0: nouveaudrmfb frame buffer device [ 5.797761] [drm] Initialized nouveau 1.3.1 20120801 for 0000:03:00.0 on minor 0 [ 6.258400] PM: Image not found (code -22) [ 6.715808] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 7.221052] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 8.381936] random: crng init done [ 8.977480] systemd[1]: Inserted module 'autofs4' [ 9.431399] systemd[1]: systemd 247.3-7 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 9.431645] systemd[1]: Detected architecture x86. [ 9.464789] systemd[1]: Set hostname to <salix>. [ 12.481508] systemd[1]: /lib/systemd/system/plymouth-start.service:16: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed. [ 12.978960] systemd[1]: Queued start job for default target Graphical Interface. [ 12.981318] systemd[1]: Created slice system-getty.slice. [ 12.982129] systemd[1]: Created slice system-modprobe.slice. [ 12.982686] systemd[1]: Created slice User and Session Slice. [ 12.983074] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 12.983566] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 12.983837] systemd[1]: Reached target Remote File Systems. [ 12.983886] systemd[1]: Reached target Slices. [ 12.984345] systemd[1]: Listening on Syslog Socket. [ 12.984669] systemd[1]: Listening on fsck to fsckd communication Socket. [ 12.984833] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 12.985255] systemd[1]: Listening on Journal Audit Socket. [ 12.985530] systemd[1]: Listening on Journal Socket (/dev/log). [ 12.985846] systemd[1]: Listening on Journal Socket. [ 13.017996] systemd[1]: Listening on udev Control Socket. [ 13.018305] systemd[1]: Listening on udev Kernel Socket. [ 13.020496] systemd[1]: Mounting Huge Pages File System... [ 13.023067] systemd[1]: Mounting POSIX Message Queue File System... [ 13.026903] systemd[1]: Mounting Kernel Debug File System... [ 13.030177] systemd[1]: Mounting Kernel Trace File System... [ 13.034214] systemd[1]: Starting Set the console keyboard layout... [ 13.037860] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 13.041287] systemd[1]: Starting Load Kernel Module configfs... [ 13.045099] systemd[1]: Starting Load Kernel Module drm... [ 13.065017] systemd[1]: Starting Load Kernel Module fuse... [ 13.229346] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 13.229513] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 13.233879] systemd[1]: Starting Journal Service... [ 13.385626] systemd[1]: Starting Load Kernel Modules... [ 13.388417] systemd[1]: Starting Remount Root and Kernel File Systems... [ 13.392427] systemd[1]: Starting Coldplug All udev Devices... [ 13.408683] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 13.409892] systemd[1]: modprobe@configfs.service: Succeeded. [ 13.410841] fuse: init (API version 7.32) [ 13.411120] systemd[1]: Finished Load Kernel Module configfs. [ 13.411945] systemd[1]: modprobe@drm.service: Succeeded. [ 13.413155] systemd[1]: Finished Load Kernel Module drm. [ 13.414191] systemd[1]: modprobe@fuse.service: Succeeded. [ 13.414736] systemd[1]: Finished Load Kernel Module fuse. [ 13.417705] systemd[1]: Mounting FUSE Control File System... [ 13.420409] systemd[1]: Mounting Kernel Configuration File System... [ 14.227646] systemd[1]: Started Journal Service. [ 14.431650] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 14.514750] lp: driver loaded but no devices found [ 14.594988] ppdev: user-space parallel port driver [ 14.805315] parport_pc 00:08: reported by Plug and Play ACPI [ 14.805427] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP] [ 14.904753] lp0: using parport0 (interrupt-driven). [ 14.973908] systemd-journald[205]: Received client request to flush runtime journal. [ 19.758925] audit: type=1400 audit(1648370540.219:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=245 comm="apparmor_parser" [ 20.303991] audit: type=1400 audit(1648370540.763:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=248 comm="apparmor_parser" [ 20.443538] audit: type=1400 audit(1648370540.903:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=249 comm="apparmor_parser" [ 20.595609] audit: type=1400 audit(1648370541.055:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=261 comm="apparmor_parser" [ 20.770779] audit: type=1400 audit(1648370541.231:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=268 comm="apparmor_parser" [ 20.932657] audit: type=1400 audit(1648370541.395:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=271 comm="apparmor_parser" [ 20.932669] audit: type=1400 audit(1648370541.395:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=271 comm="apparmor_parser" [ 20.932675] audit: type=1400 audit(1648370541.395:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=271 comm="apparmor_parser" [ 21.892472] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 21.897377] sr 3:0:1:0: Attached scsi generic sg1 type 5 [ 22.267407] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 22.532102] audit: type=1400 audit(1648370542.991:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/i386-linux-gnu/lightdm/lightdm-guest-session" pid=272 comm="apparmor_parser" [ 22.532115] audit: type=1400 audit(1648370542.991:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/i386-linux-gnu/lightdm/lightdm-guest-session//chromium" pid=272 comm="apparmor_parser" [ 22.739307] gameport gameport0: NS558 PnP Gameport is pnp00:0c/gameport0, io 0x201, speed 688kHz [ 23.865950] PCI Interrupt Link [APCJ] enabled at IRQ 22 [ 24.280484] snd_intel8x0 0000:00:06.0: intel8x0_measure_ac97_clock: measured 58697 usecs (2848 samples) [ 24.280491] snd_intel8x0 0000:00:06.0: clocking to 47485 [ 25.096733] kauditd_printk_skb: 3 callbacks suppressed [ 25.096737] audit: type=1400 audit(1648370545.559:15): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice" pid=312 comm="apparmor_parser" [ 25.096748] audit: type=1400 audit(1648370545.559:16): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice//gpg" pid=312 comm="apparmor_parser" [ 25.408744] Adding 999420k swap on /dev/sda5. Priority:-2 extents:1 across:999420k FS [ 25.458206] audit: type=1400 audit(1648370545.919:17): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=360 comm="apparmor_parser" [ 25.458219] audit: type=1400 audit(1648370545.919:18): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=360 comm="apparmor_parser" [ 38.815087] audit: type=1400 audit(1648370559.275:19): apparmor="DENIED" operation="capable" profile="/usr/sbin/cupsd" pid=419 comm="cupsd" capability=12 capname="net_admin" [ 40.761739] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s4: link becomes ready [ 40.836184] enp2s1: setting half-duplex. [ 42.278504] audit: type=1400 audit(1648370562.739:20): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=462 comm="cups-browsed" capability=23 capname="sys_nice"
Lots of information about the system in here...
Benchmark
To provide a reference comparison for this era of systems, let's run some benchmarks...
BogoMips
The BogoMips (Wikipedia) pseudo-benchmark has a behavior where the score is related to the processor clock speed, and has an easily available collection of results from a range of systems (see BogoMips mini-Howto).
Linux 2.4.18, RedHat Linux 7.3 (Valhalla) for x86:
Calibrating delay loop... 4312.26 BogoMIPS
Linux 2.6.24, Ubuntu 8.04 LTS (Hardy Heron) for x86:
Calibrating delay using timer specific routine.. 4329.00 BogoMIPS (lpj=8658001) Total of 1 processors activated (4329.00 BogoMIPS).
Linux 3.19.0, Ubuntu 14.04 LTS (Trusty Tahr) for x86:
Calibrating delay loop (skipped), value calculated using timer frequency.. 4325.50 BogoMIPS (lpj=8651016) smpboot: Total of 1 processors activated (4325.50 BogoMIPS)
Linux 5.10.0, Debian Linux 11 (bullseye) for x86:
Calibrating delay loop (skipped), value calculated using timer frequency.. 4325.54 BogoMIPS (lpj=8651092) smpboot: Total of 1 processors activated (4325.54 BogoMIPS)
These results are in line with the collection of results in the mini-Howto, and our BogoMips results collection.
OpenSSL
The OpenSSL library of cryptographic methods provides a means to test the performance of the methods. Using this we can get a feel for the computational performance of a system, and comparisons with real hardware and other emulations can show how well a particular emulation performs. Since we are mainly interested in old hardware, we'll test using two of the older methods: MD5 and RSA.
- RedHat 7.3 (Valhalla) for x86
- Ubuntu 8.04 LTS (Hardy Heron) for x86
- Ubuntu 14.04 LTS (Trusty Tahr) for x86
- Debian Linux 11 (bullseye) for x86
RedHat 7.3 (Valhalla) for x86, with the distribution supplied:
$ openssl version OpenSSL 0.9.6b [engine] 9 Jul 2001
Let's see how MD5 and RSA do:
$ openssl speed md5
Doing md5 for 3s on 8 size blocks: 9880298 md5's in 3.00s
Doing md5 for 3s on 64 size blocks: 6494247 md5's in 2.98s
Doing md5 for 3s on 256 size blocks: 3220280 md5's in 3.00s
Doing md5 for 3s on 1024 size blocks: 1059730 md5's in 3.00s
Doing md5 for 3s on 8192 size blocks: 146239 md5's in 3.00s
OpenSSL 0.9.6b [engine] 9 Jul 2001
built on: Thu Apr 4 12:18:52 EST 2002
options:bn(64,32) md2(int) rc4(idx,int) des(ptr,risc1,16,long) blowfish(idx)
compiler: gcc -fPIC -DTHREADS -D_REENTRANT -DDSO_DLFCN -DHAVE_DLFCN_H -DNO_IDEA -DNO_MDC2 -DNO_RC5 -DL_ENDIAN -DTERMIO -O2 -march=i686 -Wall -DSHA1_ASM -DMD5_ASM -DRMD160_ASM
The 'numbers' are in 1000s of bytes per second processed.
type 8 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes
md5 26347.46k 139473.76k 274797.23k 361721.17k 399329.96k
$ openssl speed rsa
Doing 512 bit private rsa's for 10s: 14632 512 bit private RSA's in 9.87s
Doing 512 bit public rsa's for 10s: 202164 512 bit public RSA's in 10.00s
Doing 1024 bit private rsa's for 10s: 3392 1024 bit private RSA's in 10.00s
Doing 1024 bit public rsa's for 10s: 71221 1024 bit public RSA's in 10.00s
Doing 2048 bit private rsa's for 10s: 596 2048 bit private RSA's in 10.01s
Doing 2048 bit public rsa's for 10s: 21157 2048 bit public RSA's in 10.00s
Doing 4096 bit private rsa's for 10s: 90 4096 bit private RSA's in 10.00s
Doing 4096 bit public rsa's for 10s: 5725 4096 bit public RSA's in 10.00s
OpenSSL 0.9.6b [engine] 9 Jul 2001
built on: Thu Apr 4 12:18:52 EST 2002
options:bn(64,32) md2(int) rc4(idx,int) des(ptr,risc1,16,long) blowfish(idx)
compiler: gcc -fPIC -DTHREADS -D_REENTRANT -DDSO_DLFCN -DHAVE_DLFCN_H -DNO_IDEA -DNO_MDC2 -DNO_RC5 -DL_ENDIAN -DTERMIO -O2 -march=i686 -Wall -DSHA1_ASM -DMD5_ASM -DRMD160_ASM
sign verify sign/s verify/s
rsa 512 bits 0.0007s 0.0000s 1482.5 20216.4
rsa 1024 bits 0.0029s 0.0001s 339.2 7122.1
rsa 2048 bits 0.0168s 0.0005s 59.5 2115.7
rsa 4096 bits 0.1111s 0.0017s 9.0 572.5
Extracting the relevant figures for comparisons:
- OpenSSL speed MD5 8,192 bytes: 399,329.96k
- OpenSSL speed RSA 4,096 bytes sign/s: 9.0
- OpenSSL speed RSA 4,096 bytes verify/s: 572.5
And an additional set of reference values.
The C compiler flags indicate instruction optimization for Pentium Pro (i686).
Ubuntu 8.04 LTS (Hardy Heron) for x86, with the distribution supplied:
$ openssl version OpenSSL 0.9.8g 19 Oct 2007
Let's see how MD5 and RSA do:
$ openssl speed md5
Doing md5 for 3s on 16 size blocks: 2796607 md5's in 2.98s
Doing md5 for 3s on 64 size blocks: 2368213 md5's in 2.98s
Doing md5 for 3s on 256 size blocks: 1716030 md5's in 2.97s
Doing md5 for 3s on 1024 size blocks: 818846 md5's in 2.98s
Doing md5 for 3s on 8192 size blocks: 138960 md5's in 2.97s
OpenSSL 0.9.8g 19 Oct 2007
built on: Thu Jun 19 20:00:16 UTC 2008
options:bn(64,32) md2(int) rc4(idx,int) des(ptr,risc1,16,long) aes(partial) blowfish(idx)
compiler: gcc -fPIC -DOPENSSL_PIC -DZLIB -DOPENSSL_THREADS -D_REENTRANT -DDSO_DLFCN -DHAVE_DLFCN_H -DL_ENDIAN -DTERMIO -O3 -march=i686 -Wa,--noexecstack -g -Wall -DOPENSSL_BN_ASM_PART_WORDS -DOPENSSL_IA32_SSE2 -DSHA1_ASM -DMD5_ASM -DRMD160_ASM -DAES_ASM
available timing options: TIMES TIMEB HZ=100 [sysconf value]
timing function used: times
The 'numbers' are in 1000s of bytes per second processed.
type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes
md5 15015.34k 50860.95k 147913.70k 281375.27k 383286.30k
$ openssl speed rsa
Doing 512 bit private rsa's for 10s: 13771 512 bit private RSA's in 9.98s
Doing 512 bit public rsa's for 10s: 191968 512 bit public RSA's in 9.97s
Doing 1024 bit private rsa's for 10s: 3131 1024 bit private RSA's in 9.97s
Doing 1024 bit public rsa's for 10s: 71315 1024 bit public RSA's in 9.98s
Doing 2048 bit private rsa's for 10s: 584 2048 bit private RSA's in 9.98s
Doing 2048 bit public rsa's for 10s: 22587 2048 bit public RSA's in 9.97s
Doing 4096 bit private rsa's for 10s: 94 4096 bit private RSA's in 10.03s
Doing 4096 bit public rsa's for 10s: 6617 4096 bit public RSA's in 9.97s
OpenSSL 0.9.8g 19 Oct 2007
built on: Thu Jun 19 20:00:16 UTC 2008
options:bn(64,32) md2(int) rc4(idx,int) des(ptr,risc1,16,long) aes(partial) blowfish(idx)
compiler: gcc -fPIC -DOPENSSL_PIC -DZLIB -DOPENSSL_THREADS -D_REENTRANT -DDSO_DLFCN -DHAVE_DLFCN_H -DL_ENDIAN -DTERMIO -O3 -march=i686 -Wa,--noexecstack -g -Wall -DOPENSSL_BN_ASM_PART_WORDS -DOPENSSL_IA32_SSE2 -DSHA1_ASM -DMD5_ASM -DRMD160_ASM -DAES_ASM
available timing options: TIMES TIMEB HZ=100 [sysconf value]
timing function used: times
sign verify sign/s verify/s
rsa 512 bits 0.000725s 0.000052s 1379.9 19254.6
rsa 1024 bits 0.003184s 0.000140s 314.0 7145.8
rsa 2048 bits 0.017089s 0.000441s 58.5 2265.5
rsa 4096 bits 0.106702s 0.001507s 9.4 663.7
Extracting the relevant figures for comparisons:
- OpenSSL speed MD5 8,192 bytes: 383,286.30k
- OpenSSL speed RSA 4,096 bytes sign/s: 9.4
- OpenSSL speed RSA 4,096 bytes verify/s: 663.7
And an additional set of reference values.
The C compiler flags indicate instruction optimization for Pentium Pro (i686).
Ubuntu 14.04 LTS (Trusty Tahr) for x86, with the distribution supplied:
$ openssl version OpenSSL 1.0.1f 6 Jan 2014
Let's see how MD5 and RSA do:
$ openssl speed md5
Doing md5 for 3s on 16 size blocks: 3688535 md5's in 2.97s
Doing md5 for 3s on 64 size blocks: 3234974 md5's in 2.97s
Doing md5 for 3s on 256 size blocks: 2122706 md5's in 2.96s
Doing md5 for 3s on 1024 size blocks: 904538 md5's in 2.97s
Doing md5 for 3s on 8192 size blocks: 142206 md5's in 2.97s
OpenSSL 1.0.1f 6 Jan 2014
built on: Thu Jun 11 15:26:18 UTC 2015
options:bn(64,32) rc4(4x,int) des(ptr,risc1,16,long) aes(partial) blowfish(idx)
compiler: cc -fPIC -DOPENSSL_PIC -DOPENSSL_THREADS -D_REENTRANT -DDSO_DLFCN -DHAVE_DLFCN_H -DL_ENDIAN -DTERMIO -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -D_FORTIFY_SOURCE=2 -Wl,-Bsymbolic-functions -Wl,-z,relro -Wa,--noexecstack -Wall -DOPENSSL_BN_ASM_PART_WORDS -DOPENSSL_IA32_SSE2 -DOPENSSL_BN_ASM_MONT -DOPENSSL_BN_ASM_GF2m -DSHA1_ASM -DSHA256_ASM -DSHA512_ASM -DMD5_ASM -DRMD160_ASM -DAES_ASM -DVPAES_ASM -DWHIRLPOOL_ASM -DGHASH_ASM
The 'numbers' are in 1000s of bytes per second processed.
type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes
md5 19870.90k 69709.88k 183585.38k 311867.65k 392239.58k
$ openssl speed rsa
Doing 512 bit private rsa's for 10s: 23965 512 bit private RSA's in 9.97s
Doing 512 bit public rsa's for 10s: 246404 512 bit public RSA's in 9.93s
Doing 1024 bit private rsa's for 10s: 4043 1024 bit private RSA's in 9.97s
Doing 1024 bit public rsa's for 10s: 74185 1024 bit public RSA's in 9.92s
Doing 2048 bit private rsa's for 10s: 602 2048 bit private RSA's in 9.98s
Doing 2048 bit public rsa's for 10s: 20355 2048 bit public RSA's in 9.93s
Doing 4096 bit private rsa's for 10s: 84 4096 bit private RSA's in 10.05s
Doing 4096 bit public rsa's for 10s: 5284 4096 bit public RSA's in 9.93s
OpenSSL 1.0.1f 6 Jan 2014
built on: Thu Jun 11 15:26:18 UTC 2015
options:bn(64,32) rc4(4x,int) des(ptr,risc1,16,long) aes(partial) blowfish(idx)
compiler: cc -fPIC -DOPENSSL_PIC -DOPENSSL_THREADS -D_REENTRANT -DDSO_DLFCN -DHAVE_DLFCN_H -DL_ENDIAN -DTERMIO -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -D_FORTIFY_SOURCE=2 -Wl,-Bsymbolic-functions -Wl,-z,relro -Wa,--noexecstack -Wall -DOPENSSL_BN_ASM_PART_WORDS -DOPENSSL_IA32_SSE2 -DOPENSSL_BN_ASM_MONT -DOPENSSL_BN_ASM_GF2m -DSHA1_ASM -DSHA256_ASM -DSHA512_ASM -DMD5_ASM -DRMD160_ASM -DAES_ASM -DVPAES_ASM -DWHIRLPOOL_ASM -DGHASH_ASM
sign verify sign/s verify/s
rsa 512 bits 0.000416s 0.000040s 2403.7 24814.1
rsa 1024 bits 0.002466s 0.000134s 405.5 7478.3
rsa 2048 bits 0.016578s 0.000488s 60.3 2049.8
rsa 4096 bits 0.119643s 0.001879s 8.4 532.1
Extracting the relevant figures for comparisons:
- OpenSSL speed MD5 8,192 bytes: 392,239.58k
- OpenSSL speed RSA 4,096 bytes sign/s: 8.4
- OpenSSL speed RSA 4,096 bytes verify/s: 532.1
And an additional set of reference values.
Debian Linux 11 (bullseye) for x86, with the distribution supplied:
$ openssl version OpenSSL 1.1.1n 15 Mar 2022
Let's see how MD5 and RSA do:
$ openssl speed md5
Doing md5 for 3s on 16 size blocks: 8511689 md5's in 3.00s
Doing md5 for 3s on 64 size blocks: 5901121 md5's in 3.00s
Doing md5 for 3s on 256 size blocks: 3021266 md5's in 2.99s
Doing md5 for 3s on 1024 size blocks: 1031643 md5's in 3.00s
Doing md5 for 3s on 8192 size blocks: 144655 md5's in 3.00s
Doing md5 for 3s on 16384 size blocks: 72893 md5's in 3.00s
OpenSSL 1.1.1n 15 Mar 2022
built on: Fri Mar 18 18:25:07 2022 UTC
options:bn(64,32) rc4(4x,int) des(long) aes(partial) blowfish(ptr)
compiler: gcc -fPIC -pthread -Wa,--noexecstack -Wall -Wa,--noexecstack -g -O2 -ffile-prefix-map=/build/openssl-zAzDjt/openssl-1.1.1n=. -fstack-protector-strong -Wformat -Werror=format-security -DOPENSSL_USE_NODELETE -DL_ENDIAN -DOPENSSL_PIC -DOPENSSL_CPUID_OBJ -DOPENSSL_BN_ASM_PART_WORDS -DOPENSSL_IA32_SSE2 -DOPENSSL_BN_ASM_MONT -DOPENSSL_BN_ASM_GF2m -DSHA1_ASM -DSHA256_ASM -DSHA512_ASM -DRC4_ASM -DMD5_ASM -DRMD160_ASM -DAESNI_ASM -DVPAES_ASM -DWHIRLPOOL_ASM -DGHASH_ASM -DECP_NISTZ256_ASM -DPOLY1305_ASM -DNDEBUG -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2
The 'numbers' are in 1000s of bytes per second processed.
type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes 16384 bytes
md5 45395.67k 125890.58k 258676.96k 352134.14k 395004.59k 398092.97k
$ openssl speed rsa
Doing 512 bits private rsa's for 10s: 22589 512 bits private RSA's in 9.99s
Doing 512 bits public rsa's for 10s: 253409 512 bits public RSA's in 10.00s
Doing 1024 bits private rsa's for 10s: 3713 1024 bits private RSA's in 9.99s
Doing 1024 bits public rsa's for 10s: 75932 1024 bits public RSA's in 9.97s
Doing 2048 bits private rsa's for 10s: 549 2048 bits private RSA's in 10.00s
Doing 2048 bits public rsa's for 10s: 20911 2048 bits public RSA's in 9.99s
Doing 3072 bits private rsa's for 10s: 180 3072 bits private RSA's in 10.04s
Doing 3072 bits public rsa's for 10s: 9539 3072 bits public RSA's in 9.99s
Doing 4096 bits private rsa's for 10s: 78 4096 bits private RSA's in 9.85s
Doing 4096 bits public rsa's for 10s: 5416 4096 bits public RSA's in 9.96s
Doing 7680 bits private rsa's for 10s: 13 7680 bits private RSA's in 10.07s
Doing 7680 bits public rsa's for 10s: 1573 7680 bits public RSA's in 10.00s
Doing 15360 bits private rsa's for 10s: 2 15360 bits private RSA's in 11.91s
Doing 15360 bits public rsa's for 10s: 397 15360 bits public RSA's in 10.00s
OpenSSL 1.1.1n 15 Mar 2022
built on: Fri Mar 18 18:25:07 2022 UTC
options:bn(64,32) rc4(4x,int) des(long) aes(partial) blowfish(ptr)
compiler: gcc -fPIC -pthread -Wa,--noexecstack -Wall -Wa,--noexecstack -g -O2 -ffile-prefix-map=/build/openssl-zAzDjt/openssl-1.1.1n=. -fstack-protector-strong -Wformat -Werror=format-security -DOPENSSL_USE_NODELETE -DL_ENDIAN -DOPENSSL_PIC -DOPENSSL_CPUID_OBJ -DOPENSSL_BN_ASM_PART_WORDS -DOPENSSL_IA32_SSE2 -DOPENSSL_BN_ASM_MONT -DOPENSSL_BN_ASM_GF2m -DSHA1_ASM -DSHA256_ASM -DSHA512_ASM -DRC4_ASM -DMD5_ASM -DRMD160_ASM -DAESNI_ASM -DVPAES_ASM -DWHIRLPOOL_ASM -DGHASH_ASM -DECP_NISTZ256_ASM -DPOLY1305_ASM -DNDEBUG -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2
sign verify sign/s verify/s
rsa 512 bits 0.000442s 0.000039s 2261.2 25340.9
rsa 1024 bits 0.002691s 0.000131s 371.7 7616.0
rsa 2048 bits 0.018215s 0.000478s 54.9 2093.2
rsa 3072 bits 0.055778s 0.001047s 17.9 954.9
rsa 4096 bits 0.126282s 0.001839s 7.9 543.8
rsa 7680 bits 0.774615s 0.006357s 1.3 157.3
rsa 15360 bits 5.955000s 0.025189s 0.2 39.7
Extracting the relevant figures for comparisons:
- OpenSSL speed MD5 8,192 bytes: 395,004.59k
- OpenSSL speed RSA 4,096 bytes sign/s: 7.9
- OpenSSL speed RSA 4,096 bytes verify/s: 543.8
And an additional set of reference values.
Further References
- List of AMD Athlon XP microprocessors - Wikipedia
- AMD Athlon XP 3000+ - AXDA3000DKV4D (333FSB)
- AMD Athlon XP 3000+ - AXDA3000DKV4E (400FSB)
- nForce2 - Wikipedia
- ASUS A7N8X - Support
- GeForce 6 series - Wikipedia
No comments:
Post a Comment