sorbus - Intel Pentium Dual E2180
A x86_64 PC of the late 2000s.
Specification
| System Name | sorbus |
|---|---|
| Mainboard | Gigabyte GA-945PL-S3P; Intel 945 + ICH7 |
| CPU | Intel Pentium Dual-Core E2180 2.0GHz, 65W TDP |
| RAM | 4 GiB (4 GiB max. installed 3 GiB max. available); 2x Kingston KVR667D2N5/2G, 2 GiB, DDR2-667 CL5 |
| Storage | built-in Intel ICH7 Parallel ATA (PATA), Ultra ATA-100 (100 MB/s) |
| ASUS DRW-402P/D DVD-R, PATA UDMA/33 | |
| Maxtor 6Y120P0, 120 GB, PATA (Ultra-ATA/133), 7,200 rpm | |
| built-in Intel ICH7 Serial ATA (SATA) II (3 Gb/s), 4 ports | |
| Hitachi HDP725025GLA380, 250GB, SATA-2, 7,200 rpm | |
| Hitachi HDP725025GLA300, 250GB, SATA-2, 7,200 rpm | |
| Seagate STM3500418AS, 500GB, SATA-2, 7,200 rpm | |
| PCIe SATA Card, SATA 2 (3 Gb/s), 2 ports, PCIe 1.0a 1x; Silicon Image, Inc. SiI 3132 Serial ATA Raid II Controller | |
| built-in floppy controller | |
| 3.5" 1.44MB floppy disk drive | |
| Graphics | ATI Radeon 5770 HD |
| Sound | built-in Intel HD Audio, Intel ICH7 |
| Network | built-in 10/100/1000 Mb/s Ethernet, Realtek RTL8111B Gigabit Ethernet |
| OS | Debian Linux 11 (bullseye) for amd64 (aka. x86_64) |
Notes:
- The Pentium Dual-Core E2180 is based on the same architecture as the Intel Core 2 Duo "Conroe" CPUs.
- While 4 GiB of RAM can be installed, due to address space limitations the maximum available RAM is limited to approx. 3 GiB. The 4 DIMM slots can be populated with 4 single sided or 2 double sided modules. Tight memory timings of CL4 or better are not supported (system fails to POST)
- While there are 6 SATA 2 (3 Gb/s) ports available in this configuration, the chipset provides PCIe 1.1 lanes, which limit throughput to approx. 250 MB/s (around 2.5 Gb/s) per PCIe 1.0a lane (PCIe 1x). This means the groups of SATA ports will be unable to reach their full throughput under concurrent loads. For traditional hard-disk drives (HDD) this is not much of a problem since sustained data rates are commonly between 80 MB/s and 160 MB/s, but for solid-state drives (SSD) which can sustain much higher data rates, this would be a bottleneck.
- The Silicon Image SiI 3132 SATA interface chipset does not have a current MS Windows 10 driver (drivers are available for XP, Vista and 7), but is supported under Linux.
Contents
- Specification
- Contents
- Intel 945 Chipset
- Resources
- System Information - Ubuntu 8.04 LTS (Hardy Heron)
- System Information - Ubuntu 18.04 LTS (Bionic Beaver)
- System Information - Debian Linux 11 (bullseye)
- Benchmark
Intel 945 Chipset
The Gigabyte GA-945PL-S3P mainboard used in sorbus, uses an Intel 945 Express chipset, but the documentation does not state which variant was used. It seems the board is a derivative of the Gigabyte GA-945PL-S3 board, and the documentation for that board states that a 945PL is used.
Checking Intel's datasheets the 945PL supports:
- Front Side Bus (FSB) speeds: 800, and 533 MHz
- RAM speeds: 533, and 400 DDR2 support
- Max. RAM: 2 GB
And the GA-945PL-S3 mainboard specifications have:
- Front Side Bus (FSB) speeds: 800, and 533 MHz
- RAM speeds: 533, and 400 DDR2 support
- Max. RAM: 4 GB
Which looks to match. The difference in memory could be due to larger DIMMs being available, or the Intel documentation could be taking the "actual memory size is less than the stated amount" caveat in to account and being a little more conservative.
For the GA-945PL-S3P mainboard specifications are a bit different:
- Front Side Bus (FSB) speeds: 1333, 1066, 800, and 533 MHz
- RAM speeds: 667, 533, and 400 DDR2 support
- Max. RAM: 2 GB
The increase to the supported FSB and RAM speeds suggests the chipset is actually the 945P. The Intel datasheets have it as:
- Front Side Bus (FSB) speeds: 1066, 800, and 533 MHz
- RAM speeds: 667, 533, and 400 DDR2 support
- Max. RAM: 4 GB
The GA-945PL-S3P manual notes that 1333 MHz FSB support is through overclocking, so the FSB and RAM speeds would be consistent with the datasheet specifications. Like for the GA-945PL-S3 the memory size difference could be due to validated DIMM sizes, or the use of conservative figures given the 3 GiB max. available RAM issue.
Resources
- GA-945PL-S3P (rev. 6.6) Gallery | Motherboard - GIGABYTE U.K.
- Intel® Pentium® Processor E2180 (1M Cache, 2.00 GHz, 800 MHz FSB) Product Specifications
- Intel 82801GB IO Controller Product Specifications Intel ICH7 southbridge
- Intel 945 Express chipset:
- Products formerly Lakeport the desktop Intel 945 family
- Products formerly Calistoga the mobile Intel 945 family
- Intel® 945G/945GZ/945GC/945P/945PL Express Chipset Family Datasheet - For the Intel® 82945G/82945GZ/82945GC Graphics and Memory Controller Hub (GMCH) and Intel® 82945P/82945PL Memory Controller Hub (MCH), June 2008 [PDF]
- Mobile Intel® 945 Express Chipset Family Datasheet, June 2008 [PDF]
- 2007 Intel chipset should remove effective 3 GB RAM limit on some Macs - CNET
- Why are the MacBook Pro "Core 2 Duo" models limited to 3 GB of memory? If I install dual 2 GB modules, why won't I be able to use 4 GB of RAM?: EveryMac.com
- SII3132 Datasheet | Silicon image - Datasheetspdf.com
System Information - Ubuntu 8.04 LTS (Hardy Heron)
Released in 2008 this long term support (LTS) release of Ubuntu uses a Linux 2.6 kernel and provides a LiveCD for testing and installation. For simplicity I'm using the LiveCD get more information.
Note: these results used a memory configuration with two Kingston ValueRAM KVR800D2N5/1G (1 GiB, DDR2-800, CL5, double sided) DIMMs, providing a total of 2 GiB of RAM at DDR2-667 speeds.
uname & lsb_release
Operating system release and version information:
$ uname -a Linux ubuntu 2.6.24-19-generic #1 SMP Wed Jun 18 14:43:41 UTC 2008 i686 GNU/Linux
So a Linux 2.6.24 kernel for i686.
$ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 8.04.1 Release: 8.04 Codename: hardy
For a Ubuntu 8.04 LTS (Hardy Heron) distribution.
/proc/cpuinfo
Processor information:
$ cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Pentium(R) Dual CPU E2180 @ 2.00GHz stepping : 13 cpu MHz : 1200.000 cache size : 1024 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts pni monitor ds_cpl est tm2 ssse3 cx16 xtpr lahf_lm bogomips : 4022.53 clflush size : 64 processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Pentium(R) Dual CPU E2180 @ 2.00GHz stepping : 13 cpu MHz : 2000.000 cache size : 1024 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts pni monitor ds_cpl est tm2 ssse3 cx16 xtpr lahf_lm bogomips : 4019.32 clflush size : 64
So the expected Intel E2180.
/proc/meminfo
Memory information:
$ cat /proc/meminfo MemTotal: 2075688 kB MemFree: 1504424 kB Buffers: 77644 kB Cached: 321272 kB SwapCached: 0 kB Active: 221356 kB Inactive: 296552 kB HighTotal: 1179584 kB HighFree: 726196 kB LowTotal: 896104 kB LowFree: 778228 kB SwapTotal: 999416 kB SwapFree: 999416 kB Dirty: 0 kB Writeback: 0 kB AnonPages: 118992 kB Mapped: 38084 kB Slab: 31712 kB SReclaimable: 23084 kB SUnreclaim: 8628 kB PageTables: 1528 kB NFS_Unstable: 0 kB Bounce: 0 kB CommitLimit: 2037260 kB Committed_AS: 340708 kB VmallocTotal: 114680 kB VmallocUsed: 10732 kB VmallocChunk: 103468 kB
Shows the expected 2 GiB of installed memory.
lspci & /proc/bus/pci/devices
List PCI devices:
$ lspci 00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02) 00:01.0 PCI bridge: Intel Corporation 82945G/GZ/P/PL PCI Express Root Port (rev 02) 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01) 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01) 00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 01) 00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 01) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01) 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller (rev 01) 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01) 01:00.0 VGA compatible controller: ATI Technologies Inc Unknown device 6758 01:00.1 Audio device: ATI Technologies Inc Unknown device aa90 03:00.0 Mass storage controller: Silicon Image, Inc. SiI 3132 Serial ATA Raid II Controller (rev 01) 04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) 05:00.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 05:00.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) 05:01.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 62) 05:01.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 62) 05:01.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 65) 05:02.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 62) 05:02.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 62) 05:02.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 65)
Lots of devices here... the Intel devices are integrated on the mainboard chipset... The raw PCI bus devices list hints at the associated drivers:
$ cat /proc/bus/pci/devices 0000 80862770 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0008 80862771 df 0 0 0 0 0 0 0 0 0 0 0 0 0 0 pcieport-driver 00d8 808627d8 10 d6200004 0 0 0 0 0 0 4000 0 0 0 0 0 0 HDA Intel 00e0 808627d0 de 0 0 0 0 0 0 0 0 0 0 0 0 0 0 pcieport-driver 00e2 808627d4 dd 0 0 0 0 0 0 0 0 0 0 0 0 0 0 pcieport-driver 00e3 808627d6 dc 0 0 0 0 0 0 0 0 0 0 0 0 0 0 pcieport-driver 00e8 808627c8 13 0 0 0 0 bc01 0 0 0 0 0 0 20 0 0 uhci_hcd 00e9 808627c9 12 0 0 0 0 b001 0 0 0 0 0 0 20 0 0 uhci_hcd 00ea 808627ca 11 0 0 0 0 b401 0 0 0 0 0 0 20 0 0 uhci_hcd 00eb 808627cb 10 0 0 0 0 b801 0 0 0 0 0 0 20 0 0 uhci_hcd 00ef 808627cc 13 d6204000 0 0 0 0 0 0 400 0 0 0 0 0 0 ehci_hcd 00f0 8086244e 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 00f8 808627b8 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 00fa 808627c0 12 1f0 3f6 170 376 f001 0 0 8 0 8 0 10 0 0 ata_piix 00fb 808627da b 0 0 0 0 501 0 0 0 0 0 0 20 0 0 0100 10026758 5 c000000c 0 d1000004 0 7001 0 d0000002 10000000 0 20000 0 100 0 20000 0101 1002aa90 9 d1020004 0 0 0 0 0 0 4000 0 0 0 0 0 0 0300 10953132 11 d3004004 0 d3000004 0 8001 0 88000000 80 0 4000 0 80 0 80000 sata_sil24 0400 10ec8168 db 9001 0 d5000004 0 0 0 88100000 100 0 1000 0 0 0 10000 r8169 0500 109e036e 14 d6100008 0 0 0 0 0 0 1000 0 0 0 0 0 0 bttv 0501 109e0878 14 d6101008 0 0 0 0 0 0 1000 0 0 0 0 0 0 Bt87x 0508 11063038 12 0 0 0 0 a001 0 0 0 0 0 0 20 0 0 uhci_hcd 0509 11063038 11 0 0 0 0 a401 0 0 0 0 0 0 20 0 0 uhci_hcd 0510 11063038 11 0 0 0 0 a801 0 0 0 0 0 0 20 0 0 uhci_hcd 0511 11063038 10 0 0 0 0 ac01 0 0 0 0 0 0 20 0 0 uhci_hcd 050a 11063104 10 d6000000 0 0 0 0 0 0 100 0 0 0 0 0 0 ehci_hcd 0512 11063104 14 d6001000 0 0 0 0 0 0 100 0 0 0 0 0 0 ehci_hcd
For a more explicit connection between the cards and their drivers use lspci -v, although it has a lot more output.
lsusb
List USB devices:
$ lsusb Bus 011 Device 002: ID 2040:9950 Hauppauge Bus 011 Device 001: ID 0000:0000 Bus 009 Device 003: ID 0409:005a NEC Corp. Bus 009 Device 001: ID 0000:0000 Bus 010 Device 002: ID 2040:9950 Hauppauge Bus 010 Device 001: ID 0000:0000 Bus 006 Device 001: ID 0000:0000 Bus 003 Device 002: ID 093a:2521 Pixart Imaging, Inc. Bus 003 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 Bus 008 Device 001: ID 0000:0000 Bus 007 Device 001: ID 0000:0000 Bus 005 Device 001: ID 0000:0000 Bus 004 Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000
A lot of devices here, although the hubs are not showing names, the two USB devices from the Hauppauge DVB-T cards can be seen, the NEC USB controller from an add-in card, and a USB mouse. Using lsusb -v would give more details.
lshw
A hardware report:
$ sudo lshw
description: Desktop Computer
product: 945PL-S3P
vendor: Gigabyte Technology Co., Ltd.
width: 32 bits
capabilities: smbios-2.4 dmi-2.4 smp-1.4 smp
configuration: boot=normal chassis=desktop cpus=2 uuid=00000000-0000-0000-0000-001D7DC77651
*-core
description: Motherboard
product: 945PL-S3P
vendor: Gigabyte Technology Co., Ltd.
physical id: 0
version: x.x
*-firmware
description: BIOS
vendor: Award Software International, Inc.
physical id: 0
version: F4 (12/07/2007)
size: 128KiB
capacity: 448KiB
capabilities: pci pnp apm upgrade shadowing cdboot bootselect edd int13floppy360 int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot zipboot biosbootspecification
*-cpu:0
description: CPU
product: Intel(R) Pentium(R) Dual CPU E2180 @ 2.00GHz
vendor: Intel Corp.
physical id: 4
bus info: cpu@0
version: 6.15.13
serial: 0000-06FD-0000-0000-0000-0000
slot: Socket 775
size: 2GHz
capacity: 4GHz
width: 64 bits
clock: 200MHz
capabilities: boot fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx x86-64 constant_tsc arch_perfmon pebs bts pni monitor ds_cpl est tm2 ssse3 cx16 xtpr lahf_lm cpufreq
configuration: id=1
*-cache:0
description: L1 cache
physical id: a
slot: Internal Cache
size: 64KiB
capacity: 64KiB
capabilities: synchronous internal write-back
*-cache:1
description: L2 cache
physical id: b
slot: External Cache
size: 1MiB
capacity: 1MiB
capabilities: synchronous internal write-back
*-logicalcpu:0
description: Logical CPU
physical id: 1.1
width: 64 bits
capabilities: logical
*-logicalcpu:1
description: Logical CPU
physical id: 1.2
width: 64 bits
capabilities: logical
*-memory
description: System Memory
physical id: 1b
slot: System board or motherboard
size: 2GiB
*-bank:0
description: DIMM 667 MHz (1.5 ns)
product: None
vendor: None
physical id: 0
serial: None
slot: A0
size: 1GiB
width: 64 bits
clock: 667MHz (1.5ns)
*-bank:1
description: DIMM [empty]
product: None
vendor: None
physical id: 1
serial: None
slot: A1
*-bank:2
description: DIMM 667 MHz (1.5 ns)
product: None
vendor: None
physical id: 2
serial: None
slot: A2
size: 1GiB
width: 64 bits
clock: 667MHz (1.5ns)
*-bank:3
description: DIMM [empty]
product: None
vendor: None
physical id: 3
serial: None
slot: A3
*-cpu:1
physical id: 1
bus info: cpu@1
version: 6.15.13
serial: 0000-06FD-0000-0000-0000-0000
size: 1200MHz
capacity: 1200MHz
capabilities: ht cpufreq
configuration: id=1
*-logicalcpu:0
description: Logical CPU
physical id: 1.1
capabilities: logical
*-logicalcpu:1
description: Logical CPU
physical id: 1.2
capabilities: logical
*-pci
description: Host bridge
product: 82945G/GZ/P/PL Memory Controller Hub
vendor: Intel Corporation
physical id: 100
bus info: pci@0000:00:00.0
version: 02
width: 32 bits
clock: 33MHz
*-pci:0
description: PCI bridge
product: 82945G/GZ/P/PL PCI Express Root Port
vendor: Intel Corporation
physical id: 1
bus info: pci@0000:00:01.0
version: 02
width: 32 bits
clock: 33MHz
capabilities: pci pm msi pciexpress normal_decode bus_master cap_list
configuration: driver=pcieport-driver
*-display UNCLAIMED
description: VGA compatible controller
product: ATI Technologies Inc
vendor: ATI Technologies Inc
physical id: 0
bus info: pci@0000:01:00.0
version: 00
width: 64 bits
clock: 33MHz
capabilities: pm pciexpress msi vga_controller bus_master cap_list
configuration: latency=0
*-multimedia UNCLAIMED
description: Audio device
product: ATI Technologies Inc
vendor: ATI Technologies Inc
physical id: 0.1
bus info: pci@0000:01:00.1
version: 00
width: 64 bits
clock: 33MHz
capabilities: pm pciexpress msi bus_master cap_list
configuration: latency=0
*-multimedia
description: Audio device
product: 82801G (ICH7 Family) High Definition Audio Controller
vendor: Intel Corporation
physical id: 1b
bus info: pci@0000:00:1b.0
version: 01
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list
configuration: driver=HDA Intel latency=0 module=snd_hda_intel
*-pci:1
description: PCI bridge
product: 82801G (ICH7 Family) PCI Express Port 1
vendor: Intel Corporation
physical id: 1c
bus info: pci@0000:00:1c.0
version: 01
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport-driver
*-pci:2
description: PCI bridge
product: 82801G (ICH7 Family) PCI Express Port 3
vendor: Intel Corporation
physical id: 1c.2
bus info: pci@0000:00:1c.2
version: 01
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport-driver
*-storage
description: Mass storage controller
product: SiI 3132 Serial ATA Raid II Controller
vendor: Silicon Image, Inc.
physical id: 0
bus info: pci@0000:03:00.0
version: 01
width: 64 bits
clock: 33MHz
capabilities: storage pm msi pciexpress bus_master cap_list
configuration: driver=sata_sil24 latency=0 module=sata_sil24
*-pci:3
description: PCI bridge
product: 82801G (ICH7 Family) PCI Express Port 4
vendor: Intel Corporation
physical id: 1c.3
bus info: pci@0000:00:1c.3
version: 01
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport-driver
*-network
description: Ethernet interface
product: RTL8111/8168B PCI Express Gigabit Ethernet controller
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:04:00.0
logical name: eth0
version: 01
serial: 00:1d:7d:c7:76:51
size: 100MB/s
capacity: 1GB/s
width: 64 bits
clock: 33MHz
capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.2LK duplex=full ip=192.168.1.139 latency=0 link=yes module=r8169 multicast=yes port=twisted pair speed=100MB/s
*-usb:0
description: USB Controller
product: 82801G (ICH7 Family) USB UHCI Controller #1
vendor: Intel Corporation
physical id: 1d
bus info: pci@0000:00:1d.0
version: 01
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master
configuration: driver=uhci_hcd latency=0 module=uhci_hcd
*-usb:1
description: USB Controller
product: 82801G (ICH7 Family) USB UHCI Controller #2
vendor: Intel Corporation
physical id: 1d.1
bus info: pci@0000:00:1d.1
version: 01
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master
configuration: driver=uhci_hcd latency=0 module=uhci_hcd
*-usb:2
description: USB Controller
product: 82801G (ICH7 Family) USB UHCI Controller #3
vendor: Intel Corporation
physical id: 1d.2
bus info: pci@0000:00:1d.2
version: 01
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master
configuration: driver=uhci_hcd latency=0 module=uhci_hcd
*-usb:3
description: USB Controller
product: 82801G (ICH7 Family) USB UHCI Controller #4
vendor: Intel Corporation
physical id: 1d.3
bus info: pci@0000:00:1d.3
version: 01
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master
configuration: driver=uhci_hcd latency=0 module=uhci_hcd
*-usb:4
description: USB Controller
product: 82801G (ICH7 Family) USB2 EHCI Controller
vendor: Intel Corporation
physical id: 1d.7
bus info: pci@0000:00:1d.7
version: 01
width: 32 bits
clock: 33MHz
capabilities: pm ehci bus_master cap_list
configuration: driver=ehci_hcd latency=0 module=ehci_hcd
*-pci:4
description: PCI bridge
product: 82801 PCI Bridge
vendor: Intel Corporation
physical id: 1e
bus info: pci@0000:00:1e.0
version: e1
width: 32 bits
clock: 33MHz
capabilities: pci subtractive_decode bus_master cap_list
*-multimedia:0
description: Multimedia video controller
product: Bt878 Video Capture
vendor: Brooktree Corporation
physical id: 0
bus info: pci@0000:05:00.0
version: 11
width: 32 bits
clock: 33MHz
capabilities: vpd pm bus_master cap_list
configuration: driver=bttv latency=32 maxlatency=40 mingnt=16 module=bttv
*-multimedia:1
description: Multimedia controller
product: Bt878 Audio Capture
vendor: Brooktree Corporation
physical id: 0.1
bus info: pci@0000:05:00.1
version: 11
width: 32 bits
clock: 33MHz
capabilities: vpd pm bus_master cap_list
configuration: driver=Bt87x latency=32 maxlatency=255 mingnt=4 module=snd_bt87x
*-usb:0
description: USB Controller
product: VT82xxxxx UHCI USB 1.1 Controller
vendor: VIA Technologies, Inc.
physical id: 1
bus info: pci@0000:05:01.0
version: 62
width: 32 bits
clock: 33MHz
capabilities: pm uhci bus_master cap_list
configuration: driver=uhci_hcd latency=32 module=uhci_hcd
*-usb:1
description: USB Controller
product: VT82xxxxx UHCI USB 1.1 Controller
vendor: VIA Technologies, Inc.
physical id: 1.1
bus info: pci@0000:05:01.1
version: 62
width: 32 bits
clock: 33MHz
capabilities: pm uhci bus_master cap_list
configuration: driver=uhci_hcd latency=32 module=uhci_hcd
*-usb:2
description: USB Controller
product: USB 2.0
vendor: VIA Technologies, Inc.
physical id: 1.2
bus info: pci@0000:05:01.2
version: 65
width: 32 bits
clock: 33MHz
capabilities: pm ehci bus_master cap_list
configuration: driver=ehci_hcd latency=32 module=ehci_hcd
*-usb:3
description: USB Controller
product: VT82xxxxx UHCI USB 1.1 Controller
vendor: VIA Technologies, Inc.
physical id: 2
bus info: pci@0000:05:02.0
version: 62
width: 32 bits
clock: 33MHz
capabilities: pm uhci bus_master cap_list
configuration: driver=uhci_hcd latency=32 module=uhci_hcd
*-usb:4
description: USB Controller
product: VT82xxxxx UHCI USB 1.1 Controller
vendor: VIA Technologies, Inc.
physical id: 2.1
bus info: pci@0000:05:02.1
version: 62
width: 32 bits
clock: 33MHz
capabilities: pm uhci bus_master cap_list
configuration: driver=uhci_hcd latency=32 module=uhci_hcd
*-usb:5
description: USB Controller
product: USB 2.0
vendor: VIA Technologies, Inc.
physical id: 2.2
bus info: pci@0000:05:02.2
version: 65
width: 32 bits
clock: 33MHz
capabilities: pm ehci bus_master cap_list
configuration: driver=ehci_hcd latency=32 module=ehci_hcd
*-isa
description: ISA bridge
product: 82801GB/GR (ICH7 Family) LPC Interface Bridge
vendor: Intel Corporation
physical id: 1f
bus info: pci@0000:00:1f.0
version: 01
width: 32 bits
clock: 33MHz
capabilities: isa bus_master cap_list
configuration: latency=0
*-ide
description: IDE interface
product: 82801GB/GR/GH (ICH7 Family) SATA IDE Controller
vendor: Intel Corporation
physical id: 1f.2
bus info: pci@0000:00:1f.2
logical name: scsi2
logical name: scsi3
version: 01
width: 32 bits
clock: 66MHz
capabilities: ide pm bus_master cap_list emulated
configuration: driver=ata_piix latency=0 module=ata_piix
*-disk
description: ATA Disk
product: Hitachi HDP72502
vendor: Hitachi
physical id: 0
bus info: scsi@2:0.0.0
logical name: /dev/sda
version: GM2O
serial: GEK230RBR5MG0A
size: 232GiB (250GB)
capabilities: partitioned partitioned:dos
configuration: ansiversion=5 signature=78eecf53
*-volume:0
description: EXT3 volume
vendor: Linux
physical id: 1
bus info: scsi@2:0.0.0,1
logical name: /dev/sda1
version: 1.0
serial: 400ebf45-92e7-4e28-85e7-281e2596c3e7
size: 231GiB
capacity: 231GiB
capabilities: primary bootable journaled extended_attributes large_files huge_files recover ext3 ext2 initialized
configuration: created=2022-03-12 10:36:26 filesystem=ext3 lastmountpoint=/ modified=2022-03-28 08:52:53 mounted=2022-03-28 08:52:58 state=clean
*-volume:1
description: Extended partition
physical id: 2
bus info: scsi@2:0.0.0,2
logical name: /dev/sda2
size: 976MiB
capacity: 976MiB
capabilities: primary extended partitioned partitioned:extended
*-logicalvolume
description: Linux swap / Solaris partition
physical id: 5
logical name: /dev/sda5
capacity: 976MiB
capabilities: nofs
*-cdrom
description: DVD writer
product: DRW-0402P/D
vendor: ASUS
physical id: 1
bus info: scsi@3:0.0.0
logical name: /dev/cdrom
logical name: /dev/dvd
logical name: /dev/scd0
logical name: /dev/sr0
logical name: /cdrom
version: 1.05
capabilities: removable audio cd-r cd-rw dvd dvd-r
configuration: ansiversion=5 mount.fstype=iso9660 mount.options=ro,noatime,relatime state=mounted status=ready
*-medium
physical id: 0
logical name: /dev/cdrom
logical name: /cdrom
configuration: mount.fstype=iso9660 mount.options=ro,noatime,relatime state=mounted
*-serial UNCLAIMED
description: SMBus
product: 82801G (ICH7 Family) SMBus Controller
vendor: Intel Corporation
physical id: 1f.3
bus info: pci@0000:00:1f.3
version: 01
width: 32 bits
clock: 33MHz
configuration: latency=0
Lots of detail here that's helpful for diagnosing issues, which is likely why it is included on the installation LiveCD.
dmesg
System message log:
$ dmesg [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.24-19-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed Jun 18 14:43:41 UTC 2008 (Ubuntu 2.6.24-19.34-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fff0000 (usable) [ 0.000000] BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] 1151MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f4b00 [ 0.000000] Entering add_active_range(0, 0, 524272) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 524272 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 524272 [ 0.000000] On node 0 totalpages: 524272 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2303 pages used for memmap [ 0.000000] HighMem zone: 292593 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP signature @ 0xC00F6440 checksum 0 [ 0.000000] ACPI: RSDP 000F6440, 0014 (r0 GBT ) [ 0.000000] ACPI: RSDT 7FFF3040, 003C (r1 GBT GBTUACPI 42302E31 GBTU 1010101) [ 0.000000] ACPI: FACP 7FFF30C0, 0074 (r1 GBT GBTUACPI 42302E31 GBTU 1010101) [ 0.000000] ACPI: DSDT 7FFF3180, 3881 (r1 GBT GBTUACPI 1000 MSFT 100000C) [ 0.000000] ACPI: FACS 7FFF0000, 0040 [ 0.000000] ACPI: HPET 7FFF6B40, 0038 (r1 GBT GBTUACPI 42302E31 GBTU 98) [ 0.000000] ACPI: MCFG 7FFF6BC0, 003C (r1 GBT GBTUACPI 42302E31 GBTU 1010101) [ 0.000000] ACPI: APIC 7FFF6A80, 0068 (r1 GBT GBTUACPI 42302E31 GBTU 1010101) [ 0.000000] ACPI: SSDT 7FFF6C40, 019E (r1 PmRef Cpu0Ist 3000 INTL 20040311) [ 0.000000] ACPI: SSDT 7FFF70D0, 0167 (r1 PmRef CpuPm 3000 INTL 20040311) [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:70000000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520177 [ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash -- console-setup/layoutcode=gb [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 2009.711 MHz processor. [ 33.294577] Console: colour VGA+ 80x25 [ 33.294580] console [tty0] enabled [ 33.294796] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 33.295023] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 33.375048] Memory: 2066808k/2097088k available (2177k kernel code, 29048k reserved, 1006k data, 368k init, 1179584k highmem) [ 33.375054] virtual kernel memory layout: [ 33.375055] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 33.375056] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 33.375057] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 33.375057] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 33.375058] .init : 0xc0421000 - 0xc047d000 ( 368 kB) [ 33.375059] .data : 0xc0320434 - 0xc041bdc4 (1006 kB) [ 33.375060] .text : 0xc0100000 - 0xc0320434 (2177 kB) [ 33.375063] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 33.375101] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 33.375226] hpet clockevent registered [ 33.455146] Calibrating delay using timer specific routine.. 4022.53 BogoMIPS (lpj=8045075) [ 33.455165] Security Framework initialized [ 33.455170] SELinux: Disabled at boot. [ 33.455183] AppArmor: AppArmor initialized [ 33.455186] Failure registering capabilities with primary security module. [ 33.455193] Mount-cache hash table entries: 512 [ 33.455305] Initializing cgroup subsys ns [ 33.455310] Initializing cgroup subsys cpuacct [ 33.455320] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001 00000000 [ 33.455326] monitor/mwait feature present. [ 33.455327] using mwait in idle threads. [ 33.455331] CPU: L1 I cache: 32K, L1 D cache: 32K [ 33.455333] CPU: L2 cache: 1024K [ 33.455335] CPU: Physical Processor ID: 0 [ 33.455337] CPU: Processor Core ID: 0 [ 33.455338] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001 00000000 [ 33.455346] Compat vDSO mapped to ffffe000. [ 33.455357] Checking 'hlt' instruction... OK. [ 33.471527] SMP alternatives: switching to UP code [ 33.472945] Early unpacking initramfs... done [ 33.770638] ACPI: Core revision 20070126 [ 33.770671] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 33.772649] CPU0: Intel(R) Pentium(R) Dual CPU E2180 @ 2.00GHz stepping 0d [ 33.772663] SMP alternatives: switching to SMP code [ 33.773295] Booting processor 1/1 eip 3000 [ 33.783354] Initializing CPU#1 [ 33.862707] Calibrating delay using timer specific routine.. 4019.32 BogoMIPS (lpj=8038643) [ 33.862713] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001 00000000 [ 33.862717] monitor/mwait feature present. [ 33.862720] CPU: L1 I cache: 32K, L1 D cache: 32K [ 33.862721] CPU: L2 cache: 1024K [ 33.862723] CPU: Physical Processor ID: 0 [ 33.862724] CPU: Processor Core ID: 1 [ 33.862726] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001 00000000 [ 33.863106] CPU1: Intel(R) Pentium(R) Dual CPU E2180 @ 2.00GHz stepping 0d [ 33.863123] Total of 2 processors activated (8041.85 BogoMIPS). [ 33.863267] ENABLING IO-APIC IRQs [ 33.863432] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 34.010646] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 34.030639] Brought up 2 CPUs [ 34.030660] CPU0 attaching sched-domain: [ 34.030663] domain 0: span 03 [ 34.030664] groups: 01 02 [ 34.030667] CPU1 attaching sched-domain: [ 34.030668] domain 0: span 03 [ 34.030669] groups: 02 01 [ 34.030852] net_namespace: 64 bytes [ 34.030863] Booting paravirtualized kernel on bare hardware [ 34.031236] Time: 8:55:23 Date: 03/28/22 [ 34.031259] NET: Registered protocol family 16 [ 34.031410] EISA bus registered [ 34.031414] ACPI: bus type pci registered [ 34.037630] PCI: PCI BIOS revision 3.00 entry at 0xfaae0, last bus=5 [ 34.037632] PCI: Using configuration type 1 [ 34.037654] Setting up standard PCI resources [ 34.039144] ACPI: EC: Look up EC in DSDT [ 34.042496] ACPI: Interpreter enabled [ 34.042499] ACPI: (supports S0 S1 S4 S5) [ 34.042510] ACPI: Using IOAPIC for interrupt routing [ 34.045956] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 34.046500] PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO [ 34.046503] PCI quirk: region 0480-04bf claimed by ICH6 GPIO [ 34.047671] PCI: Transparent bridge - 0000:00:1e.0 [ 34.047703] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 34.047802] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 34.047860] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] [ 34.047915] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] [ 34.047972] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 34.055141] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 34.055220] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 34.055295] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 34.055370] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 34.055445] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 9 10 11 12 14 15) [ 34.055520] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 34.055596] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 34.055672] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 34.055774] Linux Plug and Play Support v0.97 (c) Adam Belay [ 34.055798] pnp: PnP ACPI init [ 34.055804] ACPI: bus type pnp registered [ 34.057774] pnpacpi: exceeded the max number of mem resources: 12 [ 34.057887] pnp: PnP ACPI: found 15 devices [ 34.057889] ACPI: ACPI bus type pnp unregistered [ 34.057893] PnPBIOS: Disabled by ACPI PNP [ 34.058080] PCI: Using ACPI for IRQ routing [ 34.058082] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 34.122502] NET: Registered protocol family 8 [ 34.122504] NET: Registered protocol family 20 [ 34.122546] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 34.122552] hpet0: 3 64-bit timers, 14318180 Hz [ 34.123585] AppArmor: AppArmor Filesystem Enabled [ 34.126498] Time: tsc clocksource has been installed. [ 34.126513] Switched to high resolution mode on CPU 0 [ 34.126601] Switched to high resolution mode on CPU 1 [ 34.142516] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 34.142520] system 00:01: ioport range 0x290-0x29f has been reserved [ 34.142524] system 00:01: ioport range 0x800-0x87f has been reserved [ 34.142527] system 00:01: ioport range 0x290-0x294 has been reserved [ 34.142531] system 00:01: ioport range 0x880-0x88f has been reserved [ 34.142546] system 00:0b: ioport range 0x400-0x4bf could not be reserved [ 34.142555] system 00:0c: iomem range 0xf0000000-0xf3ffffff could not be reserved [ 34.142563] system 00:0d: iomem range 0xf0000-0xf3fff could not be reserved [ 34.142567] system 00:0d: iomem range 0xf4000-0xf7fff could not be reserved [ 34.142571] system 00:0d: iomem range 0xf8000-0xfbfff could not be reserved [ 34.142574] system 00:0d: iomem range 0xfc000-0xfffff could not be reserved [ 34.142578] system 00:0d: iomem range 0x7fff0000-0x7fffffff could not be reserved [ 34.142582] system 00:0d: iomem range 0x0-0x9ffff could not be reserved [ 34.142586] system 00:0d: iomem range 0x100000-0x7ffeffff could not be reserved [ 34.142590] system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reserved [ 34.142594] system 00:0d: iomem range 0xfed13000-0xfed1dfff could not be reserved [ 34.142598] system 00:0d: iomem range 0xfed20000-0xfed8ffff could not be reserved [ 34.142602] system 00:0d: iomem range 0xfee00000-0xfee00fff could not be reserved [ 34.142606] system 00:0d: iomem range 0xffb00000-0xffb7ffff could not be reserved [ 34.172935] PCI: Bridge: 0000:00:01.0 [ 34.172938] IO window: 7000-7fff [ 34.172941] MEM window: d0000000-d1ffffff [ 34.172944] PREFETCH window: c0000000-cfffffff [ 34.172947] PCI: Bridge: 0000:00:1c.0 [ 34.172949] IO window: 6000-6fff [ 34.172953] MEM window: disabled. [ 34.172956] PREFETCH window: disabled. [ 34.172960] PCI: Bridge: 0000:00:1c.2 [ 34.172962] IO window: 8000-8fff [ 34.172966] MEM window: d2000000-d3ffffff [ 34.172969] PREFETCH window: 88000000-880fffff [ 34.172974] PCI: Bridge: 0000:00:1c.3 [ 34.172976] IO window: 9000-9fff [ 34.172980] MEM window: d4000000-d5ffffff [ 34.172983] PREFETCH window: 88100000-881fffff [ 34.172988] PCI: Bridge: 0000:00:1e.0 [ 34.172990] IO window: a000-afff [ 34.172994] MEM window: d6000000-d60fffff [ 34.172997] PREFETCH window: d6100000-d61fffff [ 34.173012] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 34.173017] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 34.173035] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 34.173039] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 34.173055] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 17 [ 34.173060] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 34.173076] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 18 [ 34.173080] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 34.173089] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 34.173099] NET: Registered protocol family 2 [ 34.210471] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 34.210691] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 34.211134] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 34.211390] TCP: Hash tables configured (established 131072 bind 65536) [ 34.211392] TCP reno registered [ 34.222578] checking if image is initramfs... it is [ 34.808845] Freeing initrd memory: 7667k freed [ 34.809485] audit: initializing netlink socket (disabled) [ 34.809498] audit(1648457723.309:1): initialized [ 34.809684] highmem bounce pool size: 64 pages [ 34.811284] VFS: Disk quotas dquot_6.5.1 [ 34.811352] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 34.811462] io scheduler noop registered [ 34.811464] io scheduler anticipatory registered [ 34.811466] io scheduler deadline registered [ 34.811475] io scheduler cfq registered (default) [ 34.811557] Boot video device is 0000:01:00.0 [ 34.811723] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 34.811756] assign_interrupt_mode Found MSI capability [ 34.811782] Allocate Port Service[0000:00:01.0:pcie00] [ 34.811851] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 34.811888] assign_interrupt_mode Found MSI capability [ 34.811919] Allocate Port Service[0000:00:1c.0:pcie00] [ 34.811944] Allocate Port Service[0000:00:1c.0:pcie02] [ 34.812014] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 34.812052] assign_interrupt_mode Found MSI capability [ 34.812082] Allocate Port Service[0000:00:1c.2:pcie00] [ 34.812107] Allocate Port Service[0000:00:1c.2:pcie02] [ 34.812177] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 34.812214] assign_interrupt_mode Found MSI capability [ 34.812244] Allocate Port Service[0000:00:1c.3:pcie00] [ 34.812272] Allocate Port Service[0000:00:1c.3:pcie02] [ 34.812472] isapnp: Scanning for PnP cards... [ 35.165357] isapnp: No Plug & Play device found [ 35.185834] Real Time Clock Driver v1.12ac [ 35.185922] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 35.186030] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 35.186923] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 35.187585] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 35.187640] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 35.187727] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 35.188078] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 35.188085] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 35.205648] mice: PS/2 mouse device common for all mice [ 35.205744] EISA: Probing bus 0 at eisa.0 [ 35.205763] Cannot allocate resource for EISA slot 6 [ 35.205765] Cannot allocate resource for EISA slot 7 [ 35.205767] Cannot allocate resource for EISA slot 8 [ 35.205768] EISA: Detected 0 cards. [ 35.205770] cpuidle: using governor ladder [ 35.205772] cpuidle: using governor menu [ 35.205844] NET: Registered protocol family 1 [ 35.205872] Using IPI No-Shortcut mode [ 35.205898] registered taskstats version 1 [ 35.205998] Magic number: 14:822:928 [ 35.206033] hash matches device ptyxd [ 35.206066] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 35.206068] EDD information not available. [ 35.206199] Freeing unused kernel memory: 368k freed [ 35.245291] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 36.391969] fuse init (API version 7.9) [ 36.413110] ACPI: Processor [CPU0] (supports 8 throttling states) [ 36.413213] ACPI: SSDT 7FFF7040, 0087 (r1 PmRef Cpu1Ist 3000 INTL 20040311) [ 36.413323] ACPI: Processor [CPU1] (supports 8 throttling states) [ 36.693123] usbcore: registered new interface driver usbfs [ 36.693143] usbcore: registered new interface driver hub [ 36.694269] usbcore: registered new device driver usb [ 36.695315] USB Universal Host Controller Interface driver v3.0 [ 36.695366] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19 [ 36.695377] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 36.695381] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 36.695605] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 36.695634] uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000bc00 [ 36.695766] usb usb1: configuration #1 chosen from 1 choice [ 36.695787] hub 1-0:1.0: USB hub found [ 36.695792] hub 1-0:1.0: 2 ports detected [ 36.729250] SCSI subsystem initialized [ 36.739355] libata version 3.00 loaded. [ 36.799699] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18 [ 36.799710] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 36.799715] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 36.799738] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 36.799766] uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000b000 [ 36.799864] usb usb2: configuration #1 chosen from 1 choice [ 36.799885] hub 2-0:1.0: USB hub found [ 36.799889] hub 2-0:1.0: 2 ports detected [ 36.859400] Floppy drive(s): fd0 is 1.44M [ 36.879870] FDC 0 is a post-1991 82077 [ 36.903558] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 17 [ 36.903570] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 36.903574] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 36.903597] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 36.903624] uhci_hcd 0000:00:1d.2: irq 17, io base 0x0000b400 [ 36.903724] usb usb3: configuration #1 chosen from 1 choice [ 36.903744] hub 3-0:1.0: USB hub found [ 36.903749] hub 3-0:1.0: 2 ports detected [ 37.004447] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 [ 37.004459] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 37.004462] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 37.004484] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 37.004510] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000b800 [ 37.004611] usb usb4: configuration #1 chosen from 1 choice [ 37.004630] hub 4-0:1.0: USB hub found [ 37.004634] hub 4-0:1.0: 2 ports detected [ 37.036327] usb 1-1: new low speed USB device using uhci_hcd and address 2 [ 37.108354] ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 19 (level, low) -> IRQ 18 [ 37.108365] uhci_hcd 0000:05:01.0: UHCI Host Controller [ 37.108386] uhci_hcd 0000:05:01.0: new USB bus registered, assigned bus number 5 [ 37.108410] uhci_hcd 0000:05:01.0: irq 18, io base 0x0000a000 [ 37.108508] usb usb5: configuration #1 chosen from 1 choice [ 37.108531] hub 5-0:1.0: USB hub found [ 37.108536] hub 5-0:1.0: 2 ports detected [ 37.156200] usb 1-1: device descriptor read/64, error -71 [ 37.212235] ACPI: PCI Interrupt 0000:05:01.1[B] -> GSI 18 (level, low) -> IRQ 17 [ 37.212247] uhci_hcd 0000:05:01.1: UHCI Host Controller [ 37.212268] uhci_hcd 0000:05:01.1: new USB bus registered, assigned bus number 6 [ 37.212291] uhci_hcd 0000:05:01.1: irq 17, io base 0x0000a400 [ 37.212395] usb usb6: configuration #1 chosen from 1 choice [ 37.212415] hub 6-0:1.0: USB hub found [ 37.212420] hub 6-0:1.0: 2 ports detected [ 37.315156] ACPI: PCI Interrupt 0000:05:02.0[A] -> GSI 18 (level, low) -> IRQ 17 [ 37.315172] uhci_hcd 0000:05:02.0: UHCI Host Controller [ 37.315202] uhci_hcd 0000:05:02.0: new USB bus registered, assigned bus number 7 [ 37.315226] uhci_hcd 0000:05:02.0: irq 17, io base 0x0000a800 [ 37.315324] usb usb7: configuration #1 chosen from 1 choice [ 37.315345] hub 7-0:1.0: USB hub found [ 37.315349] hub 7-0:1.0: 2 ports detected [ 37.378962] usb 1-1: device descriptor read/64, error -71 [ 37.419011] ACPI: PCI Interrupt 0000:05:02.1[B] -> GSI 16 (level, low) -> IRQ 16 [ 37.419022] uhci_hcd 0000:05:02.1: UHCI Host Controller [ 37.419049] uhci_hcd 0000:05:02.1: new USB bus registered, assigned bus number 8 [ 37.419074] uhci_hcd 0000:05:02.1: irq 16, io base 0x0000ac00 [ 37.419170] usb usb8: configuration #1 chosen from 1 choice [ 37.419191] hub 8-0:1.0: USB hub found [ 37.419195] hub 8-0:1.0: 2 ports detected [ 37.523715] r8169 Gigabit Ethernet driver 2.2LK loaded [ 37.523739] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 19 (level, low) -> IRQ 18 [ 37.523756] PCI: Setting latency timer of device 0000:04:00.0 to 64 [ 37.524041] eth0: RTL8168b/8111b at 0xf8848000, 00:1d:7d:c7:76:51, XID 38000000 IRQ 219 [ 37.525149] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19 [ 37.525161] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 37.525164] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 37.525194] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 9 [ 37.529095] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 37.529101] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xd6204000 [ 37.594748] usb 1-1: new low speed USB device using uhci_hcd and address 3 [ 37.607743] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 37.607905] usb usb9: configuration #1 chosen from 1 choice [ 37.607928] hub 9-0:1.0: USB hub found [ 37.607933] hub 9-0:1.0: 8 ports detected [ 37.710742] ACPI: PCI Interrupt 0000:05:01.2[C] -> GSI 16 (level, low) -> IRQ 16 [ 37.710757] ehci_hcd 0000:05:01.2: EHCI Host Controller [ 37.710795] ehci_hcd 0000:05:01.2: new USB bus registered, assigned bus number 10 [ 37.710826] ehci_hcd 0000:05:01.2: irq 16, io mem 0xd6000000 [ 37.723594] ehci_hcd 0000:05:01.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 37.723721] usb usb10: configuration #1 chosen from 1 choice [ 37.723758] hub 10-0:1.0: USB hub found [ 37.723762] hub 10-0:1.0: 4 ports detected [ 37.827628] ACPI: PCI Interrupt 0000:05:02.2[C] -> GSI 20 (level, low) -> IRQ 20 [ 37.827650] ehci_hcd 0000:05:02.2: EHCI Host Controller [ 37.827677] ehci_hcd 0000:05:02.2: new USB bus registered, assigned bus number 11 [ 37.827714] ehci_hcd 0000:05:02.2: irq 20, io mem 0xd6001000 [ 37.839495] ehci_hcd 0000:05:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 37.839637] usb usb11: configuration #1 chosen from 1 choice [ 37.839662] hub 11-0:1.0: USB hub found [ 37.839667] hub 11-0:1.0: 4 ports detected [ 37.870434] end_request: I/O error, dev fd0, sector 0 [ 37.942593] sata_sil24 0000:03:00.0: version 1.1 [ 37.942620] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 17 [ 37.942670] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 37.943910] scsi0 : sata_sil24 [ 37.944474] scsi1 : sata_sil24 [ 37.944505] ata1: SATA max UDMA/100 host m128@0xd3004000 port 0xd3000000 irq 17 [ 37.944509] ata2: SATA max UDMA/100 host m128@0xd3004000 port 0xd3002000 irq 17 [ 38.909311] end_request: I/O error, dev fd0, sector 0 [ 39.364808] usb 9-3: new high speed USB device using ehci_hcd and address 3 [ 39.497077] usb 9-3: configuration #1 chosen from 1 choice [ 39.497210] hub 9-3:1.0: USB hub found [ 39.497314] hub 9-3:1.0: 4 ports detected [ 39.948186] end_request: I/O error, dev fd0, sector 0 [ 40.020116] ata1: SATA link down (SStatus 0 SControl 0) [ 40.028087] usb 10-1: new high speed USB device using ehci_hcd and address 2 [ 40.161863] usb 10-1: configuration #1 chosen from 1 choice [ 40.399668] usb 11-1: new high speed USB device using ehci_hcd and address 2 [ 40.533371] usb 11-1: configuration #1 chosen from 1 choice [ 40.771259] usb 1-1: new low speed USB device using uhci_hcd and address 4 [ 40.891128] usb 1-1: device descriptor read/64, error -71 [ 40.983052] end_request: I/O error, dev fd0, sector 0 [ 41.118882] usb 1-1: device descriptor read/64, error -71 [ 41.334650] usb 1-1: new low speed USB device using uhci_hcd and address 5 [ 41.454518] usb 1-1: device descriptor read/64, error -71 [ 41.678270] usb 1-1: device descriptor read/64, error -71 [ 41.894045] usb 1-1: new low speed USB device using uhci_hcd and address 6 [ 42.017924] end_request: I/O error, dev fd0, sector 0 [ 42.097863] ata2: SATA link down (SStatus 0 SControl 0) [ 42.100441] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 18 [ 42.100475] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 42.100485] ACPI: PCI interrupt for device 0000:00:1f.2 disabled [ 42.103350] ata_piix 0000:00:1f.2: version 2.12 [ 42.103356] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] [ 42.103377] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 18 [ 42.103406] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 42.103457] scsi2 : ata_piix [ 42.103504] scsi3 : ata_piix [ 42.103968] ata3: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 42.103971] ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 42.273821] ata3.00: HPA unlocked: 488395055 -> 488397168, native 488397168 [ 42.273827] ata3.00: ATA-8: Hitachi HDP725025GLA380, GM2OA52A, max UDMA/133 [ 42.273830] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 42.290018] ata3.00: configured for UDMA/133 [ 42.301595] usb 1-1: device not accepting address 6, error -71 [ 42.413468] usb 1-1: new low speed USB device using uhci_hcd and address 7 [ 42.609636] ata4.00: ATAPI: ASUS DRW-0402P/D, 1.05, max UDMA/33 [ 42.773372] ata4.00: configured for UDMA/33 [ 42.773473] scsi 2:0:0:0: Direct-Access ATA Hitachi HDP72502 GM2O PQ: 0 ANSI: 5 [ 42.780105] scsi 3:0:0:0: CD-ROM ASUS DRW-0402P/D 1.05 PQ: 0 ANSI: 5 [ 42.785466] Driver 'sd' needs updating - please use bus_type methods [ 42.785544] sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) [ 42.785554] sd 2:0:0:0: [sda] Write Protect is off [ 42.785556] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 42.785569] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 42.785612] sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) [ 42.785620] sd 2:0:0:0: [sda] Write Protect is off [ 42.785622] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 42.785636] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 42.785639] sda:<4>Driver 'sr' needs updating - please use bus_type methods [ 42.813259] sda1 sda2 <<3>usb 1-1: device not accepting address 7, error -71 [ 42.844341] sda5 > [ 42.844471] sd 2:0:0:0: [sda] Attached SCSI disk [ 42.848319] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 42.848336] sr 3:0:0:0: Attached scsi generic sg1 type 5 [ 42.850980] sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray [ 42.850985] Uniform CD-ROM driver Revision: 3.20 [ 42.851034] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 43.052805] end_request: I/O error, dev fd0, sector 0 [ 43.064825] usb 3-1: new low speed USB device using uhci_hcd and address 2 [ 43.232887] usb 3-1: configuration #1 chosen from 1 choice [ 43.257208] usbcore: registered new interface driver hiddev [ 43.272894] input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.2/usb3/3-1/3-1:1.0/input/input2 [ 43.292570] input,hidraw0: USB HID v1.11 Mouse [USB OPTICAL MOUSE] on usb-0000:00:1d.2-1 [ 43.292589] usbcore: registered new interface driver usbhid [ 43.292594] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 43.662332] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 43.696657] ISO 9660 Extensions: RRIP_1991A [ 44.025671] Registering unionfs 1.4 [ 44.025675] unionfs: debugging is not enabled [ 44.033309] loop: module loaded [ 44.386697] squashfs: version 3.3 (2007/10/31) Phillip Lougher [ 88.382066] Linux agpgart interface v0.102 [ 88.419871] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 88.591298] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 88.597151] input: Power Button (FF) as /devices/virtual/input/input4 [ 88.635091] ACPI: Power Button (FF) [PWRF] [ 88.635178] input: Power Button (CM) as /devices/virtual/input/input5 [ 88.647094] ACPI: Power Button (CM) [PWRB] [ 89.507183] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 89.629904] iTCO_vendor_support: vendor-support=0 [ 89.635599] IBM TrackPoint firmware: 0x0b, buttons: 3/3 [ 89.648787] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input6 [ 89.812274] parport_pc 00:08: reported by Plug and Play ACPI [ 89.812323] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 89.944020] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 89.944111] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460) [ 89.944141] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 90.217361] Linux video capture interface: v2.00 [ 90.638205] intel_rng: FWH not detected [ 91.312588] dib0700: loaded with support for 6 different device-types [ 91.312857] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in warm state. [ 91.312895] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 91.314802] DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T) [ 91.319105] bttv: driver version 0.9.17 loaded [ 91.319109] bttv: using 8 buffers with 2080k (520 pages) each for capture [ 91.319159] bttv: Bt8xx card found (0). [ 91.319183] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 91.319195] bttv0: Bt878 (rev 17) at 0000:05:00.0, irq: 20, latency: 32, mmio: 0xd6100000 [ 91.319208] bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb [ 91.319211] bttv0: using: Hauppauge (bt878) [card=10,autodetected] [ 91.319241] bttv0: gpio: en=00000000, out=00000000 in=00ffffdb [init] [ 91.321725] bttv0: Hauppauge/Voodoo msp34xx: reset line init [5] [ 91.358137] tveeprom 1-0050: Hauppauge model 44805, rev C111, serial# 2321503 [ 91.358139] tveeprom 1-0050: tuner model is Philips FI1246 MK2 (idx 11, type 1) [ 91.358142] tveeprom 1-0050: TV standards PAL(I) (eeprom 0x10) [ 91.358143] tveeprom 1-0050: audio processor is None (idx 0) [ 91.358145] tveeprom 1-0050: has no radio [ 91.358147] bttv0: Hauppauge eeprom indicates model#44805 [ 91.358149] bttv0: tuner type=1 [ 91.358159] bttv0: i2c: checking for MSP34xx @ 0x80... not found [ 91.358911] bttv0: i2c: checking for TDA9875 @ 0xb0... not found [ 91.359623] bttv0: i2c: checking for TDA7432 @ 0x8a... not found [ 91.449393] DVB: registering frontend 0 (DiBcom 3000MC/P)... [ 91.610971] tuner 1-0061: chip found @ 0xc2 (bt878 #0 [sw]) [ 91.610993] tuner-simple 1-0061: type set to 1 (Philips PAL_I (FI1246 and compatibles)) [ 91.610996] tuner 1-0061: type set to Philips PAL_I (FI12 [ 91.610998] tuner-simple 1-0061: type set to 1 (Philips PAL_I (FI1246 and compatibles)) [ 91.611000] tuner 1-0061: type set to Philips PAL_I (FI12 [ 91.621439] bttv0: registered device video0 [ 91.621458] bttv0: registered device vbi0 [ 91.621489] bttv0: PLL: 28636363 => 35468950 .<6>MT2060: successfully identified (IF1 = 1220) [ 91.636801] . ok [ 91.734065] ACPI: PCI Interrupt 0000:05:00.1[A] -> GSI 20 (level, low) -> IRQ 20 [ 91.734230] ALSA /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/bt87x.c:947: bt87x0: Using board 1, analog, digital (rate 32000 Hz) [ 91.804104] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 91.804129] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 91.808557] bt878: AUDIO driver version 0.0.0 loaded [ 92.113786] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 92.113982] DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T) [ 92.119410] DVB: registering frontend 1 (DiBcom 3000MC/P)... [ 92.123777] MT2060: successfully identified (IF1 = 1220) [ 92.623420] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1e.0/0000:05:01.2/usb10/10-1/input/input7 [ 92.650727] dvb-usb: schedule remote query interval to 150 msecs. [ 92.650733] dvb-usb: Hauppauge Nova-T 500 Dual DVB-T successfully initialized and connected. [ 92.651097] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in warm state. [ 92.651128] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 92.651276] DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T) [ 92.756001] DVB: registering frontend 2 (DiBcom 3000MC/P)... [ 92.759376] MT2060: successfully identified (IF1 = 1220) [ 93.232687] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 93.232873] DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T) [ 93.238312] DVB: registering frontend 3 (DiBcom 3000MC/P)... [ 93.242678] MT2060: successfully identified (IF1 = 1220) [ 93.726206] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1e.0/0000:05:02.2/usb11/11-1/input/input8 [ 93.753526] dvb-usb: schedule remote query interval to 150 msecs. [ 93.753532] dvb-usb: Hauppauge Nova-T 500 Dual DVB-T successfully initialized and connected. [ 93.753727] usbcore: registered new interface driver dvb_usb_dib0700 [ 95.009310] Adding 999416k swap on /dev/sda5. Priority:-1 extents:1 across:999416k [ 95.760929] ip_tables: (C) 2000-2006 Netfilter Core Team [ 97.000396] No dock devices found. [ 101.956446] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) [ 101.956450] apm: disabled - APM is not SMP safe. [ 102.075068] lp0: using parport0 (interrupt-driven). [ 102.133547] ppdev: user-space parallel port driver [ 108.326516] r8169: eth0: link up [ 108.326526] r8169: eth0: link up [ 108.593048] Bluetooth: Core ver 2.11 [ 108.593408] NET: Registered protocol family 31 [ 108.593413] Bluetooth: HCI device and connection manager initialized [ 108.593418] Bluetooth: HCI socket layer initialized [ 108.665888] Bluetooth: L2CAP ver 2.9 [ 108.665894] Bluetooth: L2CAP socket layer initialized [ 108.815949] Bluetooth: RFCOMM socket layer initialized [ 108.815968] Bluetooth: RFCOMM TTY layer initialized [ 108.815971] Bluetooth: RFCOMM ver 1.8 [ 109.076794] usb 1-1: new low speed USB device using uhci_hcd and address 8 [ 109.256589] usb 1-1: device descriptor read/64, error -71 [ 109.480356] usb 1-1: device descriptor read/64, error -71 [ 109.696113] usb 1-1: new low speed USB device using uhci_hcd and address 9 [ 109.815979] usb 1-1: device descriptor read/64, error -71 [ 110.039741] usb 1-1: device descriptor read/64, error -71 [ 110.255504] usb 1-1: new low speed USB device using uhci_hcd and address 10 [ 110.663055] usb 1-1: device not accepting address 10, error -71 [ 110.711816] NET: Registered protocol family 17 [ 110.774938] usb 1-1: new low speed USB device using uhci_hcd and address 11 [ 111.182494] usb 1-1: device not accepting address 11, error -71 [ 115.325372] NET: Registered protocol family 10 [ 115.325690] lo: Disabled Privacy Extensions [ 308.196056] usb 1-1: new low speed USB device using uhci_hcd and address 12 [ 308.315838] usb 1-1: device descriptor read/64, error -71 [ 308.539486] usb 1-1: device descriptor read/64, error -71 [ 308.755159] usb 1-1: new low speed USB device using uhci_hcd and address 13 [ 308.874951] usb 1-1: device descriptor read/64, error -71 [ 309.098604] usb 1-1: device descriptor read/64, error -71 [ 309.314256] usb 1-1: new low speed USB device using uhci_hcd and address 14 [ 309.721610] usb 1-1: device not accepting address 14, error -71 [ 309.833428] usb 1-1: new low speed USB device using uhci_hcd and address 15 [ 310.240777] usb 1-1: device not accepting address 15, error -71
Lots of information about the system and detection of the devices in here...
System Information - Ubuntu 18.04 LTS (Bionic Beaver)
The 2018 long term support (LTS) release of Ubuntu is a much more modern Linux release and and we're using the 64-bit x86_64 version rather than the 32-bit x86 version. So let's see what this Linux has to say about the system...
Note: these results used a memory configuration with two Kingston ValueRAM KVR800D2N5/1G (1 GiB, DDR2-800, CL5, double sided) DIMMs, providing a total of 2 GiB of RAM at DDR2-667 speeds.
uname
Operating system information:
$ uname -a Linux sorbus 4.15.0-143-generic #147-Ubuntu SMP Wed Apr 14 16:10:11 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux
Kernel "Linux", on node "sorbus", release "4.15.0-143-generic", version "#147-Ubuntu SMP Wed Apr 14 16:10:11 UTC 2021", machine hardware "x86_64", processor type "x86_64", platform "x86_64", operating system "GNU/Linux".
lsb_release
Easier to interpret operating system information:
$ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 18.04.5 LTS Release: 18.04 Codename: bionic
Distribution name and codename.
lscpu & /proc/cpuinfo
Processor information:
$ lscpu Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 2 On-line CPU(s) list: 0,1 Thread(s) per core: 1 Core(s) per socket: 2 Socket(s): 1 NUMA node(s): 1 Vendor ID: GenuineIntel CPU family: 6 Model: 15 Model name: Intel(R) Pentium(R) Dual CPU E2180 @ 2.00GHz Stepping: 13 CPU MHz: 1333.653 CPU max MHz: 2000.0000 CPU min MHz: 1200.0000 BogoMIPS: 4019.33 L1d cache: 32K L1i cache: 32K L2 cache: 1024K NUMA node0 CPU(s): 0,1 Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl cpuid aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm lahf_lm pti dtherm $ cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Pentium(R) Dual CPU E2180 @ 2.00GHz stepping : 13 microcode : 0xa4 cpu MHz : 1205.705 cache size : 1024 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl cpuid aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm lahf_lm pti dtherm bugs : cpu_meltdown spectre_v1 spectre_v2 spec_store_bypass l1tf mds swapgs itlb_multihit bogomips : 4019.33 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Pentium(R) Dual CPU E2180 @ 2.00GHz stepping : 13 microcode : 0xa4 cpu MHz : 1205.840 cache size : 1024 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 apicid : 1 initial apicid : 1 fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl cpuid aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm lahf_lm pti dtherm bugs : cpu_meltdown spectre_v1 spectre_v2 spec_store_bypass l1tf mds swapgs itlb_multihit bogomips : 4019.33 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management:
Since this processor is dual-core, without hyper-threading, two CPUs are reported.
lspci
PCI bus and devices:
$ sudo lspci -v 00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02) Subsystem: Gigabyte Technology Co., Ltd 82945G/GZ/P/PL Memory Controller Hub Flags: bus master, fast devsel, latency 0 Capabilities: [e0] Vendor Specific Information: Len=09 00:01.0 PCI bridge: Intel Corporation 82945G/GZ/P/PL PCI Express Root Port (rev 02) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0, IRQ 16 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00007000-00007fff Memory behind bridge: d0000000-d1ffffff Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff Capabilities: [88] Subsystem: Gigabyte Technology Co., Ltd 82945G/GZ/P/PL PCI Express Root Port Capabilities: [80] Power Management version 2 Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [a0] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Capabilities: [140] Root Complex Link Kernel driver in use: pcieport Kernel modules: shpchp 00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 01) Subsystem: Gigabyte Technology Co., Ltd GA-D525TUD (Realtek ALC887) Flags: bus master, fast devsel, latency 0, IRQ 24 Memory at d6200000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [100] Virtual Channel Capabilities: [130] Root Complex Link Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel 00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 01) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0, IRQ 16 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 00006000-00006fff Memory behind bridge: 80000000-801fffff Prefetchable memory behind bridge: 0000000080200000-00000000803fffff Capabilities: [40] Express Root Port (Slot+), MSI 00 Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [90] Subsystem: Gigabyte Technology Co., Ltd NM10/ICH7 Family PCI Express Port 1 Capabilities: [a0] Power Management version 2 Capabilities: [100] Virtual Channel Capabilities: [180] Root Complex Link Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.2 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 3 (rev 01) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0, IRQ 18 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 00008000-00008fff Memory behind bridge: d2000000-d3ffffff Prefetchable memory behind bridge: 0000000080400000-00000000805fffff Capabilities: [40] Express Root Port (Slot+), MSI 00 Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [90] Subsystem: Gigabyte Technology Co., Ltd NM10/ICH7 Family PCI Express Port 3 Capabilities: [a0] Power Management version 2 Capabilities: [100] Virtual Channel Capabilities: [180] Root Complex Link Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.3 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 4 (rev 01) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0, IRQ 19 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 00009000-00009fff Memory behind bridge: d4000000-d5ffffff Prefetchable memory behind bridge: 0000000080600000-00000000807fffff Capabilities: [40] Express Root Port (Slot+), MSI 00 Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [90] Subsystem: Gigabyte Technology Co., Ltd NM10/ICH7 Family PCI Express Port 4 Capabilities: [a0] Power Management version 2 Capabilities: [100] Virtual Channel Capabilities: [180] Root Complex Link Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 01) (prog-if 00 [UHCI]) Subsystem: Gigabyte Technology Co., Ltd GA-D525TUD Flags: bus master, medium devsel, latency 0, IRQ 23 I/O ports at bc00 [size=32] Kernel driver in use: uhci_hcd 00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 01) (prog-if 00 [UHCI]) Subsystem: Gigabyte Technology Co., Ltd GA-D525TUD Flags: bus master, medium devsel, latency 0, IRQ 19 I/O ports at b000 [size=32] Kernel driver in use: uhci_hcd 00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 01) (prog-if 00 [UHCI]) Subsystem: Gigabyte Technology Co., Ltd GA-D525TUD Flags: bus master, medium devsel, latency 0, IRQ 18 I/O ports at b400 [size=32] Kernel driver in use: uhci_hcd 00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 01) (prog-if 00 [UHCI]) Subsystem: Gigabyte Technology Co., Ltd GA-D525TUD Flags: bus master, medium devsel, latency 0, IRQ 16 I/O ports at b800 [size=32] Kernel driver in use: uhci_hcd 00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI]) Subsystem: Gigabyte Technology Co., Ltd GA-D525TUD Flags: bus master, medium devsel, latency 0, IRQ 23 Memory at d6204000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Kernel driver in use: ehci-pci 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) (prog-if 01 [Subtractive decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=32 I/O behind bridge: 0000a000-0000afff Memory behind bridge: d6000000-d60fffff Prefetchable memory behind bridge: 00000000d6100000-00000000d61fffff Capabilities: [50] Subsystem: Gigabyte Technology Co., Ltd Motherboard 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) Subsystem: Gigabyte Technology Co., Ltd 82801GB/GR (ICH7 Family) LPC Interface Bridge Flags: bus master, medium devsel, latency 0 Capabilities: [e0] Vendor Specific Information: Len=0c Kernel driver in use: lpc_ich Kernel modules: intel_rng, lpc_ich, leds_ss4200 00:1f.2 IDE interface: Intel Corporation NM10/ICH7 Family SATA Controller [IDE mode] (rev 01) (prog-if 80 [ISA Compatibility mode-only controller, supports bus mastering]) Subsystem: Gigabyte Technology Co., Ltd NM10/ICH7 Family SATA Controller [IDE mode] Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 19 I/O ports at 01f0 [size=8] I/O ports at 03f4 I/O ports at 0170 [size=8] I/O ports at 0374 I/O ports at f000 [size=16] Capabilities: [70] Power Management version 2 Kernel driver in use: ata_piix Kernel modules: pata_acpi 00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 01) Subsystem: Gigabyte Technology Co., Ltd GA-8I945PG-RH/GA-D525TUD Mainboard Flags: medium devsel, IRQ 11 I/O ports at 0500 [size=32] Kernel modules: i2c_i801 01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Turks XT [Radeon HD 6670/7670] (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Turks XT [Radeon HD 6670/7670] Flags: bus master, fast devsel, latency 0, IRQ 26 Memory at c0000000 (64-bit, prefetchable) [size=256M] Memory at d1000000 (64-bit, non-prefetchable) [size=128K] I/O ports at 7000 [size=256] [virtual] Expansion ROM at 000c0000 [disabled] [size=128K] Capabilities: [50] Power Management version 3 Capabilities: [58] Express Legacy Endpoint, MSI 00 Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 Capabilities: [150] Advanced Error Reporting Kernel driver in use: radeon Kernel modules: radeon 01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Turks HDMI Audio [Radeon HD 6500/6600 / 6700M Series] Subsystem: ASUSTeK Computer Inc. Turks HDMI Audio [Radeon HD 6500/6600 / 6700M Series] Flags: bus master, fast devsel, latency 0, IRQ 25 Memory at d1020000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 3 Capabilities: [58] Express Legacy Endpoint, MSI 00 Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 Capabilities: [150] Advanced Error Reporting Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel 03:00.0 Mass storage controller: Silicon Image, Inc. SiI 3132 Serial ATA Raid II Controller (rev 01) Subsystem: Silicon Image, Inc. SiI 3132 Serial ATA Raid II Controller Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at d3004000 (64-bit, non-prefetchable) [size=128] Memory at d3000000 (64-bit, non-prefetchable) [size=16K] I/O ports at 8000 [size=128] [virtual] Expansion ROM at d2000000 [disabled] [size=512K] Capabilities: [54] Power Management version 2 Capabilities: [5c] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Legacy Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Kernel driver in use: sata_sil24 Kernel modules: sata_sil24 04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 01) Subsystem: Gigabyte Technology Co., Ltd Onboard Ethernet Flags: bus master, fast devsel, latency 0, IRQ 19 I/O ports at 9000 [size=256] Memory at d5000000 (64-bit, non-prefetchable) [size=4K] [virtual] Expansion ROM at d4000000 [disabled] [size=64K] Capabilities: [40] Power Management version 2 Capabilities: [48] Vital Product Data Capabilities: [50] MSI: Enable- Count=1/2 Maskable- 64bit+ Capabilities: [60] Express Endpoint, MSI 00 Capabilities: [84] Vendor Specific Information: Len=4c Capabilities: [100] Advanced Error Reporting Capabilities: [12c] Virtual Channel Capabilities: [148] Device Serial Number 25-00-00-00-10-ec-81-68 Capabilities: [154] Power Budgeting Kernel driver in use: r8169 Kernel modules: r8169 05:00.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) Subsystem: Hauppauge computer works Inc. WinTV Series Flags: bus master, medium devsel, latency 32, IRQ 20 Memory at d6100000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data Capabilities: [4c] Power Management version 2 Kernel driver in use: bttv Kernel modules: bttv 05:00.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) Subsystem: Hauppauge computer works Inc. WinTV Series Flags: bus master, medium devsel, latency 32, IRQ 20 Memory at d6101000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data Capabilities: [4c] Power Management version 2 Kernel driver in use: snd_bt87x Kernel modules: snd_bt87x 05:01.0 USB controller: VIA Technologies, Inc. VT82xx/62xx UHCI USB 1.1 Controller (rev 62) (prog-if 00 [UHCI]) Subsystem: VIA Technologies, Inc. VT82xx/62xx UHCI USB 1.1 Controller Flags: bus master, medium devsel, latency 32, IRQ 19 I/O ports at a000 [size=32] Capabilities: [80] Power Management version 2 Kernel driver in use: uhci_hcd 05:01.1 USB controller: VIA Technologies, Inc. VT82xx/62xx UHCI USB 1.1 Controller (rev 62) (prog-if 00 [UHCI]) Subsystem: VIA Technologies, Inc. VT82xx/62xx UHCI USB 1.1 Controller Flags: bus master, medium devsel, latency 32, IRQ 18 I/O ports at a400 [size=32] Capabilities: [80] Power Management version 2 Kernel driver in use: uhci_hcd 05:01.2 USB controller: VIA Technologies, Inc. USB 2.0 (rev 65) (prog-if 20 [EHCI]) Subsystem: VIA Technologies, Inc. USB 2.0 Controller Flags: bus master, medium devsel, latency 32, IRQ 16 Memory at d6000000 (32-bit, non-prefetchable) [size=256] Capabilities: [80] Power Management version 2 Kernel driver in use: ehci-pci 05:02.0 USB controller: VIA Technologies, Inc. VT82xx/62xx UHCI USB 1.1 Controller (rev 62) (prog-if 00 [UHCI]) Subsystem: VIA Technologies, Inc. VT82xx/62xx UHCI USB 1.1 Controller Flags: bus master, medium devsel, latency 32, IRQ 18 I/O ports at a800 [size=32] Capabilities: [80] Power Management version 2 Kernel driver in use: uhci_hcd 05:02.1 USB controller: VIA Technologies, Inc. VT82xx/62xx UHCI USB 1.1 Controller (rev 62) (prog-if 00 [UHCI]) Subsystem: VIA Technologies, Inc. VT82xx/62xx UHCI USB 1.1 Controller Flags: bus master, medium devsel, latency 32, IRQ 16 I/O ports at ac00 [size=32] Capabilities: [80] Power Management version 2 Kernel driver in use: uhci_hcd 05:02.2 USB controller: VIA Technologies, Inc. USB 2.0 (rev 65) (prog-if 20 [EHCI]) Subsystem: VIA Technologies, Inc. USB 2.0 Controller Flags: bus master, medium devsel, latency 32, IRQ 20 Memory at d6001000 (32-bit, non-prefetchable) [size=256] Capabilities: [80] Power Management version 2 Kernel driver in use: ehci-pci
Wow that's a lot of devices...
lsusb
USB buses, hubs and devices:
$ lsusb
Bus 003 Device 002: ID 2040:9950 Hauppauge WinTV Nova-T-500
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 011 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 010 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 2040:9950 Hauppauge WinTV Nova-T-500
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 0409:005a NEC Corp. HighSpeed Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 002: ID 093a:2521 Pixart Imaging, Inc. Optical Mouse
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 55aa:b012 OnSpec Electronic, Inc. Mitsumi FA402M 8-in-2 Card Reader
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
$ lsusb -t
/: Bus 11.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 10.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 09.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 08.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 07.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
|__ Port 2: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
/: Bus 06.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
|__ Port 1: Dev 2, If 0, Class=Mass Storage, Driver=usb-storage, 12M
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/4p, 480M
|__ Port 1: Dev 2, If 0, Class=Vendor Specific Class, Driver=dvb_usb_dib0700, 480M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/4p, 480M
|__ Port 1: Dev 2, If 0, Class=Vendor Specific Class, Driver=dvb_usb_dib0700, 480M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/8p, 480M
|__ Port 3: Dev 3, If 0, Class=Hub, Driver=hub/4p, 480M
A lot of devices here, since some of the PCI devices use embedded USB devices.
lshw
A hardware report:
$ sudo lshw
sorbus
description: Desktop Computer
product: 945PL-S3P
vendor: Gigabyte Technology Co., Ltd.
width: 64 bits
capabilities: smbios-2.4 dmi-2.4 smp vsyscall32
configuration: boot=normal chassis=desktop uuid=00000000-0000-0000-0000-001D7DC77651
*-core
description: Motherboard
product: 945PL-S3P
vendor: Gigabyte Technology Co., Ltd.
physical id: 0
version: x.x
*-firmware
description: BIOS
vendor: Award Software International, Inc.
physical id: 0
version: F4
date: 12/07/2007
size: 128KiB
capacity: 448KiB
capabilities: pci pnp apm upgrade shadowing cdboot bootselect edd int13floppy360 int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot zipboot biosbootspecification
*-cpu
description: CPU
product: Intel(R) Pentium(R) Dual CPU E2180 @ 2.00GHz
vendor: Intel Corp.
physical id: 4
bus info: cpu@0
version: Intel(R) Pentium(R) Dual CP
slot: Socket 775
size: 1400MHz
capacity: 4GHz
width: 64 bits
clock: 200MHz
capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx x86-64 constant_tsc arch_perfmon pebs bts rep_good nopl cpuid aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm lahf_lm pti dtherm cpufreq
*-cache:0
description: L1 cache
physical id: a
slot: Internal Cache
size: 64KiB
capacity: 64KiB
capabilities: synchronous internal write-back
configuration: level=1
*-cache:1
description: L2 cache
physical id: b
slot: External Cache
size: 1MiB
capacity: 1MiB
capabilities: synchronous internal write-back
configuration: level=2
*-memory
description: System Memory
physical id: 1b
slot: System board or motherboard
size: 2GiB
*-bank:0
description: DIMMProject-Id-Version: lshwReport-Msgid-Bugs-To: FULL NAME <EMAIL@ADDRESS>PO-Revision-Date: 2012-02-05 00:26+0000Last-Translator: Andi Chandler <Unknown>Language-Team: English (United Kingdom) <en_GB@li.org>MIME-Version: 1.0Content-Type: text/plain; charset=UTF-8Content-Transfer-Encoding: 8bitX-Launchpad-Export-Date: 2018-07-12 13:19+0000X-Generator: Launchpad (build 18719) 667 MHz (1.5 ns)
product: None
vendor: None
physical id: 0
serial: None
slot: A0
size: 1GiB
width: 64 bits
clock: 667MHz (1.5ns)
*-bank:1
description: DIMMProject-Id-Version: lshwReport-Msgid-Bugs-To: FULL NAME <EMAIL@ADDRESS>PO-Revision-Date: 2012-02-05 00:26+0000Last-Translator: Andi Chandler <Unknown>Language-Team: English (United Kingdom) <en_GB@li.org>MIME-Version: 1.0Content-Type: text/plain; charset=UTF-8Content-Transfer-Encoding: 8bitX-Launchpad-Export-Date: 2018-07-12 13:19+0000X-Generator: Launchpad (build 18719) [empty]
product: None
vendor: None
physical id: 1
serial: None
slot: A1
*-bank:2
description: DIMMProject-Id-Version: lshwReport-Msgid-Bugs-To: FULL NAME <EMAIL@ADDRESS>PO-Revision-Date: 2012-02-05 00:26+0000Last-Translator: Andi Chandler <Unknown>Language-Team: English (United Kingdom) <en_GB@li.org>MIME-Version: 1.0Content-Type: text/plain; charset=UTF-8Content-Transfer-Encoding: 8bitX-Launchpad-Export-Date: 2018-07-12 13:19+0000X-Generator: Launchpad (build 18719) 667 MHz (1.5 ns)
product: None
vendor: None
physical id: 2
serial: None
slot: A2
size: 1GiB
width: 64 bits
clock: 667MHz (1.5ns)
*-bank:3
description: DIMMProject-Id-Version: lshwReport-Msgid-Bugs-To: FULL NAME <EMAIL@ADDRESS>PO-Revision-Date: 2012-02-05 00:26+0000Last-Translator: Andi Chandler <Unknown>Language-Team: English (United Kingdom) <en_GB@li.org>MIME-Version: 1.0Content-Type: text/plain; charset=UTF-8Content-Transfer-Encoding: 8bitX-Launchpad-Export-Date: 2018-07-12 13:19+0000X-Generator: Launchpad (build 18719) [empty]
product: None
vendor: None
physical id: 3
serial: None
slot: A3
*-pci
description: Host bridge
product: 82945G/GZ/P/PL Memory Controller Hub
vendor: Intel Corporation
physical id: 100
bus info: pci@0000:00:00.0
version: 02
width: 32 bits
clock: 33MHz
*-pci:0
description: PCI bridge
product: 82945G/GZ/P/PL PCI Express Root Port
vendor: Intel Corporation
physical id: 1
bus info: pci@0000:00:01.0
version: 02
width: 32 bits
clock: 33MHz
capabilities: pci pm msi pciexpress normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:16 ioport:7000(size=4096) memory:d0000000-d1ffffff ioport:c0000000(size=268435456)
*-display
description: VGA compatible controller
product: Turks XT [Radeon HD 6670/7670]
vendor: Advanced Micro Devices, Inc. [AMD/ATI]
physical id: 0
bus info: pci@0000:01:00.0
version: 00
width: 64 bits
clock: 33MHz
capabilities: pm pciexpress msi vga_controller bus_master cap_list rom
configuration: driver=radeon latency=0
resources: irq:26 memory:c0000000-cfffffff memory:d1000000-d101ffff ioport:7000(size=256) memory:c0000-dffff
*-multimedia
description: Audio device
product: Turks HDMI Audio [Radeon HD 6500/6600 / 6700M Series]
vendor: Advanced Micro Devices, Inc. [AMD/ATI]
physical id: 0.1
bus info: pci@0000:01:00.1
version: 00
width: 64 bits
clock: 33MHz
capabilities: pm pciexpress msi bus_master cap_list
configuration: driver=snd_hda_intel latency=0
resources: irq:25 memory:d1020000-d1023fff
*-multimedia
description: Audio device
product: NM10/ICH7 Family High Definition Audio Controller
vendor: Intel Corporation
physical id: 1b
bus info: pci@0000:00:1b.0
version: 01
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list
configuration: driver=snd_hda_intel latency=0
resources: irq:24 memory:d6200000-d6203fff
*-pci:1
description: PCI bridge
product: NM10/ICH7 Family PCI Express Port 1
vendor: Intel Corporation
physical id: 1c
bus info: pci@0000:00:1c.0
version: 01
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:16 ioport:6000(size=4096) memory:80000000-801fffff ioport:80200000(size=2097152)
*-pci:2
description: PCI bridge
product: NM10/ICH7 Family PCI Express Port 3
vendor: Intel Corporation
physical id: 1c.2
bus info: pci@0000:00:1c.2
version: 01
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:18 ioport:8000(size=4096) memory:d2000000-d3ffffff ioport:80400000(size=2097152)
*-storage
description: Mass storage controller
product: SiI 3132 Serial ATA Raid II Controller
vendor: Silicon Image, Inc.
physical id: 0
bus info: pci@0000:03:00.0
version: 01
width: 64 bits
clock: 33MHz
capabilities: storage pm msi pciexpress bus_master cap_list rom
configuration: driver=sata_sil24 latency=0
resources: irq:18 memory:d3004000-d300407f memory:d3000000-d3003fff ioport:8000(size=128) memory:d2000000-d207ffff
*-pci:3
description: PCI bridge
product: NM10/ICH7 Family PCI Express Port 4
vendor: Intel Corporation
physical id: 1c.3
bus info: pci@0000:00:1c.3
version: 01
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:19 ioport:9000(size=4096) memory:d4000000-d5ffffff ioport:80600000(size=2097152)
*-network
description: Ethernet interface
product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:04:00.0
logical name: enp4s0
version: 01
serial: 00:1d:7d:c7:76:51
size: 100Mbit/s
capacity: 1Gbit/s
width: 64 bits
clock: 33MHz
capabilities: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full ip=192.168.1.84 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s
resources: irq:19 ioport:9000(size=256) memory:d5000000-d5000fff memory:d4000000-d400ffff
*-usb:0
description: USB controller
product: NM10/ICH7 Family USB UHCI Controller #1
vendor: Intel Corporation
physical id: 1d
bus info: pci@0000:00:1d.0
version: 01
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master
configuration: driver=uhci_hcd latency=0
resources: irq:23 ioport:bc00(size=32)
*-usbhost
product: UHCI Host Controller
vendor: Linux 4.15.0-143-generic uhci_hcd
physical id: 1
bus info: usb@4
logical name: usb4
version: 4.15
capabilities: usb-1.10
configuration: driver=hub slots=2 speed=12Mbit/s
*-usb
description: Mass storage device
product: 8-in-2
physical id: 1
bus info: usb@4:1
logical name: scsi4
version: 1.01
serial: 4094774016
capabilities: usb-1.10 scsi emulated scsi-host
configuration: driver=usb-storage maxpower=200mA speed=12Mbit/s
*-disk:0
description: SCSI Disk
physical id: 0.0.0
bus info: scsi@4:0.0.0
logical name: /dev/sdb
configuration: logicalsectorsize=512 sectorsize=512
*-disk:1
description: SCSI Disk
physical id: 0.0.1
bus info: scsi@4:0.0.1
logical name: /dev/sdc
configuration: logicalsectorsize=512 sectorsize=512
*-usb:1
description: USB controller
product: NM10/ICH7 Family USB UHCI Controller #2
vendor: Intel Corporation
physical id: 1d.1
bus info: pci@0000:00:1d.1
version: 01
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master
configuration: driver=uhci_hcd latency=0
resources: irq:19 ioport:b000(size=32)
*-usbhost
product: UHCI Host Controller
vendor: Linux 4.15.0-143-generic uhci_hcd
physical id: 1
bus info: usb@5
logical name: usb5
version: 4.15
capabilities: usb-1.10
configuration: driver=hub slots=2 speed=12Mbit/s
*-usb:2
description: USB controller
product: NM10/ICH7 Family USB UHCI Controller #3
vendor: Intel Corporation
physical id: 1d.2
bus info: pci@0000:00:1d.2
version: 01
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master
configuration: driver=uhci_hcd latency=0
resources: irq:18 ioport:b400(size=32)
*-usbhost
product: UHCI Host Controller
vendor: Linux 4.15.0-143-generic uhci_hcd
physical id: 1
bus info: usb@6
logical name: usb6
version: 4.15
capabilities: usb-1.10
configuration: driver=hub slots=2 speed=12Mbit/s
*-usb:3
description: USB controller
product: NM10/ICH7 Family USB UHCI Controller #4
vendor: Intel Corporation
physical id: 1d.3
bus info: pci@0000:00:1d.3
version: 01
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master
configuration: driver=uhci_hcd latency=0
resources: irq:16 ioport:b800(size=32)
*-usbhost
product: UHCI Host Controller
vendor: Linux 4.15.0-143-generic uhci_hcd
physical id: 1
bus info: usb@7
logical name: usb7
version: 4.15
capabilities: usb-1.10
configuration: driver=hub slots=2 speed=12Mbit/s
*-usb
description: Mouse
product: USB OPTICAL MOUSE
vendor: Pixart Imaging, Inc.
physical id: 2
bus info: usb@7:2
version: 1.00
capabilities: usb-1.10
configuration: driver=usbhid maxpower=100mA speed=2Mbit/s
*-usb:4
description: USB controller
product: NM10/ICH7 Family USB2 EHCI Controller
vendor: Intel Corporation
physical id: 1d.7
bus info: pci@0000:00:1d.7
version: 01
width: 32 bits
clock: 33MHz
capabilities: pm ehci bus_master cap_list
configuration: driver=ehci-pci latency=0
resources: irq:23 memory:d6204000-d62043ff
*-usbhost
product: EHCI Host Controller
vendor: Linux 4.15.0-143-generic ehci_hcd
physical id: 1
bus info: usb@1
logical name: usb1
version: 4.15
capabilities: usb-2.00
configuration: driver=hub slots=8 speed=480Mbit/s
*-usb
description: USB hub
product: HighSpeed Hub
vendor: NEC Corp.
physical id: 3
bus info: usb@1:3
version: 1.00
capabilities: usb-2.00
configuration: driver=hub maxpower=100mA slots=4 speed=480Mbit/s
*-pci:4
description: PCI bridge
product: 82801 PCI Bridge
vendor: Intel Corporation
physical id: 1e
bus info: pci@0000:00:1e.0
version: e1
width: 32 bits
clock: 33MHz
capabilities: pci subtractive_decode bus_master cap_list
resources: ioport:a000(size=4096) memory:d6000000-d60fffff ioport:d6100000(size=1048576)
*-multimedia:0
description: Multimedia video controller
product: Bt878 Video Capture
vendor: Brooktree Corporation
physical id: 0
bus info: pci@0000:05:00.0
version: 11
width: 32 bits
clock: 33MHz
capabilities: vpd pm bus_master cap_list
configuration: driver=bttv latency=32 maxlatency=40 mingnt=16
resources: irq:20 memory:d6100000-d6100fff
*-multimedia:1
description: Multimedia controller
product: Bt878 Audio Capture
vendor: Brooktree Corporation
physical id: 0.1
bus info: pci@0000:05:00.1
version: 11
width: 32 bits
clock: 33MHz
capabilities: vpd pm bus_master cap_list
configuration: driver=snd_bt87x latency=32 maxlatency=255 mingnt=4
resources: irq:20 memory:d6101000-d6101fff
*-usb:0
description: USB controller
product: VT82xx/62xx UHCI USB 1.1 Controller
vendor: VIA Technologies, Inc.
physical id: 1
bus info: pci@0000:05:01.0
version: 62
width: 32 bits
clock: 33MHz
capabilities: pm uhci bus_master cap_list
configuration: driver=uhci_hcd latency=32
resources: irq:19 ioport:a000(size=32)
*-usbhost
product: UHCI Host Controller
vendor: Linux 4.15.0-143-generic uhci_hcd
physical id: 1
bus info: usb@8
logical name: usb8
version: 4.15
capabilities: usb-1.10
configuration: driver=hub slots=2 speed=12Mbit/s
*-usb:1
description: USB controller
product: VT82xx/62xx UHCI USB 1.1 Controller
vendor: VIA Technologies, Inc.
physical id: 1.1
bus info: pci@0000:05:01.1
version: 62
width: 32 bits
clock: 33MHz
capabilities: pm uhci bus_master cap_list
configuration: driver=uhci_hcd latency=32
resources: irq:18 ioport:a400(size=32)
*-usbhost
product: UHCI Host Controller
vendor: Linux 4.15.0-143-generic uhci_hcd
physical id: 1
bus info: usb@9
logical name: usb9
version: 4.15
capabilities: usb-1.10
configuration: driver=hub slots=2 speed=12Mbit/s
*-usb:2
description: USB controller
product: USB 2.0
vendor: VIA Technologies, Inc.
physical id: 1.2
bus info: pci@0000:05:01.2
version: 65
width: 32 bits
clock: 33MHz
capabilities: pm ehci bus_master cap_list
configuration: driver=ehci-pci latency=32
resources: irq:16 memory:d6000000-d60000ff
*-usbhost
product: EHCI Host Controller
vendor: Linux 4.15.0-143-generic ehci_hcd
physical id: 1
bus info: usb@2
logical name: usb2
version: 4.15
capabilities: usb-2.00
configuration: driver=hub slots=4 speed=480Mbit/s
*-usb
description: Generic USB device
product: WinTV Nova-DT
vendor: Hauppauge
physical id: 1
bus info: usb@2:1
version: 1.00
serial: 4028916467
capabilities: usb-2.00
configuration: driver=dvb_usb_dib0700 maxpower=500mA speed=480Mbit/s
*-usb:3
description: USB controller
product: VT82xx/62xx UHCI USB 1.1 Controller
vendor: VIA Technologies, Inc.
physical id: 2
bus info: pci@0000:05:02.0
version: 62
width: 32 bits
clock: 33MHz
capabilities: pm uhci bus_master cap_list
configuration: driver=uhci_hcd latency=32
resources: irq:18 ioport:a800(size=32)
*-usbhost
product: UHCI Host Controller
vendor: Linux 4.15.0-143-generic uhci_hcd
physical id: 1
bus info: usb@10
logical name: usb10
version: 4.15
capabilities: usb-1.10
configuration: driver=hub slots=2 speed=12Mbit/s
*-usb:4
description: USB controller
product: VT82xx/62xx UHCI USB 1.1 Controller
vendor: VIA Technologies, Inc.
physical id: 2.1
bus info: pci@0000:05:02.1
version: 62
width: 32 bits
clock: 33MHz
capabilities: pm uhci bus_master cap_list
configuration: driver=uhci_hcd latency=32
resources: irq:16 ioport:ac00(size=32)
*-usbhost
product: UHCI Host Controller
vendor: Linux 4.15.0-143-generic uhci_hcd
physical id: 1
bus info: usb@11
logical name: usb11
version: 4.15
capabilities: usb-1.10
configuration: driver=hub slots=2 speed=12Mbit/s
*-usb:5
description: USB controller
product: USB 2.0
vendor: VIA Technologies, Inc.
physical id: 2.2
bus info: pci@0000:05:02.2
version: 65
width: 32 bits
clock: 33MHz
capabilities: pm ehci bus_master cap_list
configuration: driver=ehci-pci latency=32
resources: irq:20 memory:d6001000-d60010ff
*-usbhost
product: EHCI Host Controller
vendor: Linux 4.15.0-143-generic ehci_hcd
physical id: 1
bus info: usb@3
logical name: usb3
version: 4.15
capabilities: usb-2.00
configuration: driver=hub slots=4 speed=480Mbit/s
*-usb
description: Generic USB device
product: WinTV Nova-DT
vendor: Hauppauge
physical id: 1
bus info: usb@3:1
version: 1.00
serial: 4028917118
capabilities: usb-2.00
configuration: driver=dvb_usb_dib0700 maxpower=500mA speed=480Mbit/s
*-isa
description: ISA bridge
product: 82801GB/GR (ICH7 Family) LPC Interface Bridge
vendor: Intel Corporation
physical id: 1f
bus info: pci@0000:00:1f.0
version: 01
width: 32 bits
clock: 33MHz
capabilities: isa bus_master cap_list
configuration: driver=lpc_ich latency=0
resources: irq:0
*-ide
description: IDE interface
product: NM10/ICH7 Family SATA Controller [IDE mode]
vendor: Intel Corporation
physical id: 1f.2
bus info: pci@0000:00:1f.2
version: 01
width: 32 bits
clock: 66MHz
capabilities: ide pm isa_compatibility_mode-only_controller__supports_bus_mastering bus_master cap_list
configuration: driver=ata_piix latency=0
resources: irq:19 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8) ioport:376 ioport:f000(size=16)
*-serial UNCLAIMED
description: SMBus
product: NM10/ICH7 Family SMBus Controller
vendor: Intel Corporation
physical id: 1f.3
bus info: pci@0000:00:1f.3
version: 01
width: 32 bits
clock: 33MHz
configuration: latency=0
resources: ioport:500(size=32)
*-scsi:0
physical id: 1
logical name: scsi0
capabilities: emulated
*-disk
description: ATA Disk
product: Hitachi HDP72502
vendor: Hitachi
physical id: 0.0.0
bus info: scsi@0:0.0.0
logical name: /dev/sda
version: A52A
serial: GEK230RBR5MG0A
size: 232GiB (250GB)
capabilities: partitioned partitioned:dos
configuration: ansiversion=5 logicalsectorsize=512 sectorsize=512 signature=a2460c79
*-volume
description: EXT4 volume
vendor: Linux
physical id: 1
bus info: scsi@0:0.0.0,1
logical name: /dev/sda1
logical name: /
version: 1.0
serial: d3a5f469-fc46-4172-8ddf-a35bffca9829
size: 232GiB
capacity: 232GiB
capabilities: primary bootable journaled extended_attributes large_files huge_files dir_nlink recover 64bit extents ext4 ext2 initialized
configuration: created=2019-02-28 11:18:34 filesystem=ext4 lastmountpoint=/ modified=2021-06-20 10:42:49 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,data=ordered mounted=2021-06-20 10:42:54 state=mounted
*-scsi:1
physical id: 2
logical name: scsi1
capabilities: emulated
*-cdrom
description: DVD writer
product: DRW-0402P/D
vendor: ASUS
physical id: 0.0.0
bus info: scsi@1:0.0.0
logical name: /dev/cdrom
logical name: /dev/cdrw
logical name: /dev/dvd
logical name: /dev/dvdrw
logical name: /dev/sr0
version: 1.05
capabilities: removable audio cd-r cd-rw dvd dvd-r
configuration: ansiversion=5 status=nodisc
Coverage of the already identified devices, plus a few odds and ends that we've missed so far.
dmesg
System message buffer:
$ dmesg [ 0.000000] microcode: microcode updated early to revision 0xa4, date = 2010-10-02 [ 0.000000] Linux version 4.15.0-143-generic (buildd@lcy01-amd64-001) (gcc version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04)) #147-Ubuntu SMP Wed Apr 14 16:10:11 UTC 2021 (Ubuntu 4.15.0-143.147-generic 4.15.18) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-143-generic root=UUID=d3a5f469-fc46-4172-8ddf-a35bffca9829 ro quiet splash vt.handoff=1 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffeffff] usable [ 0.000000] BIOS-e820: [mem 0x000000007fff0000-0x000000007fff2fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007fff3000-0x000000007fffffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. 945PL-S3P/945PL-S3P, BIOS F4 12/07/2007 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x7fff0 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] found SMP MP-table at [mem 0x000f4b00-0x000f4b0f] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] RAMDISK: [mem 0x3324d000-0x3591dfff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F6440 000014 (v00 GBT ) [ 0.000000] ACPI: RSDT 0x000000007FFF3040 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP 0x000000007FFF30C0 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT 0x000000007FFF3180 003881 (v01 GBT GBTUACPI 00001000 MSFT 0100000C) [ 0.000000] ACPI: FACS 0x000000007FFF0000 000040 [ 0.000000] ACPI: HPET 0x000000007FFF6B40 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG 0x000000007FFF6BC0 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: APIC 0x000000007FFF6A80 000068 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: SSDT 0x000000007FFF6C40 00019E (v01 PmRef Cpu0Ist 00003000 INTL 20040311) [ 0.000000] ACPI: SSDT 0x000000007FFF70D0 000167 (v01 PmRef CpuPm 00003000 INTL 20040311) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007ffeffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x7ffc5000-0x7ffeffff] [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x000000007ffeffff] [ 0.000000] Normal empty [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000007ffeffff] [ 0.000000] Reserved but unavailable: 98 pages [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007ffeffff] [ 0.000000] On node 0 totalpages: 524174 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 8128 pages used for memmap [ 0.000000] DMA32 zone: 520176 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] e820: [mem 0x80000000-0xefffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] random: get_random_bytes called from start_kernel+0x99/0x500 with crng_init=0 [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] percpu: Embedded 45 pages/cpu s147456 r8192 d28672 u1048576 [ 0.000000] pcpu-alloc: s147456 r8192 d28672 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 515961 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-143-generic root=UUID=d3a5f469-fc46-4172-8ddf-a35bffca9829 ro quiet splash vt.handoff=1 [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 1995204K/2096696K available (12300K kernel code, 2483K rwdata, 4316K rodata, 2444K init, 2724K bss, 101492K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] ftrace: allocating 39437 entries in 155 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=2. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS: 524544, nr_irqs: 440, preallocated irqs: 16 [ 0.000000] vt handoff: transparent VT on vt#1 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20170831 [ 0.000000] ACPI: 3 ACPI AML tables successfully acquired and loaded [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] APIC: Switch to symmetric I/O mode setup [ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.020000] tsc: Fast TSC calibration using PIT [ 0.024000] tsc: Detected 2009.669 MHz processor [ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4019.33 BogoMIPS (lpj=8038676) [ 0.024000] pid_max: default: 32768 minimum: 301 [ 0.024000] Security Framework initialized [ 0.024000] Yama: becoming mindful. [ 0.024000] AppArmor: AppArmor initialized [ 0.024000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.024000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.024000] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.024000] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.024000] CPU0: Thermal monitoring enabled (TM2) [ 0.024000] process: using mwait in idle threads [ 0.024000] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 [ 0.024000] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 [ 0.024000] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.024000] Spectre V2 : Mitigation: Full generic retpoline [ 0.024000] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.024000] Speculative Store Bypass: Vulnerable [ 0.024000] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.024000] Freeing SMP alternatives memory: 36K [ 0.139692] smpboot: CPU0: Intel(R) Pentium(R) Dual CPU E2180 @ 2.00GHz (family: 0x6, model: 0xf, stepping: 0xd) [ 0.139832] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. [ 0.139840] core: PEBS disabled due to CPU errata [ 0.139843] ... version: 2 [ 0.139845] ... bit width: 40 [ 0.139846] ... generic registers: 2 [ 0.139847] ... value mask: 000000ffffffffff [ 0.139848] ... max period: 000000007fffffff [ 0.139849] ... fixed-purpose events: 3 [ 0.139850] ... event mask: 0000000700000003 [ 0.139918] Hierarchical SRCU implementation. [ 0.140000] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.140000] smp: Bringing up secondary CPUs ... [ 0.140000] x86: Booting SMP configuration: [ 0.140000] .... node #0, CPUs: #1 [ 0.140042] smp: Brought up 1 node, 2 CPUs [ 0.140042] smpboot: Max logical packages: 1 [ 0.140042] smpboot: Total of 2 processors activated (8038.67 BogoMIPS) [ 0.141109] devtmpfs: initialized [ 0.141109] x86/mm: Memory block size: 128MB [ 0.141109] evm: security.selinux [ 0.141109] evm: security.SMACK64 [ 0.141109] evm: security.SMACK64EXEC [ 0.141109] evm: security.SMACK64TRANSMUTE [ 0.141109] evm: security.SMACK64MMAP [ 0.141109] evm: security.apparmor [ 0.141109] evm: security.ima [ 0.141109] evm: security.capability [ 0.141109] PM: Registering ACPI NVS region [mem 0x7fff0000-0x7fff2fff] (12288 bytes) [ 0.141109] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.141109] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.141109] pinctrl core: initialized pinctrl subsystem [ 0.141109] RTC time: 9:42:43, date: 06/20/21 [ 0.141109] NET: Registered protocol family 16 [ 0.141109] audit: initializing netlink subsys (disabled) [ 0.141109] audit: type=2000 audit(1624182163.140:1): state=initialized audit_enabled=0 res=1 [ 0.144177] cpuidle: using governor ladder [ 0.144177] cpuidle: using governor menu [ 0.144177] ACPI: bus type PCI registered [ 0.144177] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.144179] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.144183] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 [ 0.144196] PCI: Using configuration type 1 for base access [ 0.144255] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.144255] mtrr: probably your BIOS does not setup all CPUs. [ 0.144255] mtrr: corrected configuration. [ 0.146105] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.146105] ACPI: Added _OSI(Module Device) [ 0.146105] ACPI: Added _OSI(Processor Device) [ 0.146105] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.146105] ACPI: Added _OSI(Processor Aggregator Device) [ 0.146105] ACPI: Added _OSI(Linux-Dell-Video) [ 0.146105] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.146105] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.151572] ACPI: Dynamic OEM Table Load: [ 0.151580] ACPI: SSDT 0xFFFF8C16BCA2BA80 000087 (v01 PmRef Cpu1Ist 00003000 INTL 20040311) [ 0.152050] ACPI: Interpreter enabled [ 0.152079] ACPI: (supports S0 S1 S4 S5) [ 0.152081] ACPI: Using IOAPIC for interrupt routing [ 0.152120] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.152380] ACPI: Enabled 8 GPEs in block 00 to 1F [ 0.160726] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f]) [ 0.160734] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.160742] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.161116] PCI host bridge to bus 0000:00 [ 0.161119] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.161121] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.161123] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.161125] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.161127] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window] [ 0.161129] pci_bus 0000:00: root bus resource [bus 00-3f] [ 0.161140] pci 0000:00:00.0: [8086:2770] type 00 class 0x060000 [ 0.161298] pci 0000:00:01.0: [8086:2771] type 01 class 0x060400 [ 0.161356] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.161505] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300 [ 0.161528] pci 0000:00:1b.0: reg 0x10: [mem 0xd6200000-0xd6203fff 64bit] [ 0.161609] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.161742] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400 [ 0.161830] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.161968] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400 [ 0.162056] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.162191] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400 [ 0.162280] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.162419] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300 [ 0.162465] pci 0000:00:1d.0: reg 0x20: [io 0xbc00-0xbc1f] [ 0.162610] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300 [ 0.162655] pci 0000:00:1d.1: reg 0x20: [io 0xb000-0xb01f] [ 0.162799] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300 [ 0.162845] pci 0000:00:1d.2: reg 0x20: [io 0xb400-0xb41f] [ 0.162987] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300 [ 0.163032] pci 0000:00:1d.3: reg 0x20: [io 0xb800-0xb81f] [ 0.163182] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320 [ 0.163204] pci 0000:00:1d.7: reg 0x10: [mem 0xd6204000-0xd62043ff] [ 0.163399] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.163584] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100 [ 0.163673] pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO [ 0.163678] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO [ 0.163682] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f) [ 0.163685] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f) [ 0.163829] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x010180 [ 0.163847] pci 0000:00:1f.2: reg 0x10: [io 0x0000-0x0007] [ 0.163855] pci 0000:00:1f.2: reg 0x14: [io 0x0000-0x0003] [ 0.163864] pci 0000:00:1f.2: reg 0x18: [io 0x0000-0x0007] [ 0.163872] pci 0000:00:1f.2: reg 0x1c: [io 0x0000-0x0003] [ 0.163880] pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf00f] [ 0.163897] pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.163899] pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.163901] pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.163902] pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.163928] pci 0000:00:1f.2: PME# supported from D3hot [ 0.164061] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500 [ 0.164118] pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f] [ 0.164309] pci 0000:01:00.0: [1002:6758] type 00 class 0x030000 [ 0.164335] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.164347] pci 0000:01:00.0: reg 0x18: [mem 0xd1000000-0xd101ffff 64bit] [ 0.164356] pci 0000:01:00.0: reg 0x20: [io 0x7000-0x70ff] [ 0.164372] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 0.164380] pci 0000:01:00.0: enabling Extended Tags [ 0.164427] pci 0000:01:00.0: supports D1 D2 [ 0.164493] pci 0000:01:00.1: [1002:aa90] type 00 class 0x040300 [ 0.164518] pci 0000:01:00.1: reg 0x10: [mem 0xd1020000-0xd1023fff 64bit] [ 0.164559] pci 0000:01:00.1: enabling Extended Tags [ 0.164604] pci 0000:01:00.1: supports D1 D2 [ 0.176057] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.176062] pci 0000:00:01.0: bridge window [io 0x7000-0x7fff] [ 0.176067] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd1ffffff] [ 0.176074] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.176156] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.176166] pci 0000:00:1c.0: bridge window [io 0x6000-0x6fff] [ 0.176241] pci 0000:03:00.0: [1095:3132] type 00 class 0x018000 [ 0.176281] pci 0000:03:00.0: reg 0x10: [mem 0xd3004000-0xd300407f 64bit] [ 0.176302] pci 0000:03:00.0: reg 0x18: [mem 0xd3000000-0xd3003fff 64bit] [ 0.176316] pci 0000:03:00.0: reg 0x20: [io 0x8000-0x807f] [ 0.176343] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref] [ 0.176425] pci 0000:03:00.0: supports D1 D2 [ 0.176491] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.176501] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 0.176505] pci 0000:00:1c.2: bridge window [io 0x8000-0x8fff] [ 0.176509] pci 0000:00:1c.2: bridge window [mem 0xd2000000-0xd3ffffff] [ 0.176581] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000 [ 0.176615] pci 0000:04:00.0: reg 0x10: [io 0x9000-0x90ff] [ 0.176647] pci 0000:04:00.0: reg 0x18: [mem 0xd5000000-0xd5000fff 64bit] [ 0.176685] pci 0000:04:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 0.176696] pci 0000:04:00.0: enabling Extended Tags [ 0.176792] pci 0000:04:00.0: supports D1 D2 [ 0.176793] pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.176870] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.176880] pci 0000:00:1c.3: PCI bridge to [bus 04] [ 0.176884] pci 0000:00:1c.3: bridge window [io 0x9000-0x9fff] [ 0.176887] pci 0000:00:1c.3: bridge window [mem 0xd4000000-0xd5ffffff] [ 0.176944] pci 0000:05:00.0: [109e:036e] type 00 class 0x040000 [ 0.176966] pci 0000:05:00.0: reg 0x10: [mem 0xd6100000-0xd6100fff pref] [ 0.177106] pci 0000:05:00.1: [109e:0878] type 00 class 0x048000 [ 0.177128] pci 0000:05:00.1: reg 0x10: [mem 0xd6101000-0xd6101fff pref] [ 0.177275] pci 0000:05:01.0: [1106:3038] type 00 class 0x0c0300 [ 0.177328] pci 0000:05:01.0: reg 0x20: [io 0xa000-0xa01f] [ 0.177378] pci 0000:05:01.0: supports D1 D2 [ 0.177379] pci 0000:05:01.0: PME# supported from D0 D1 D2 D3hot [ 0.177439] pci 0000:05:01.1: [1106:3038] type 00 class 0x0c0300 [ 0.177492] pci 0000:05:01.1: reg 0x20: [io 0xa400-0xa41f] [ 0.177541] pci 0000:05:01.1: supports D1 D2 [ 0.177543] pci 0000:05:01.1: PME# supported from D0 D1 D2 D3hot [ 0.177604] pci 0000:05:01.2: [1106:3104] type 00 class 0x0c0320 [ 0.177625] pci 0000:05:01.2: reg 0x10: [mem 0xd6000000-0xd60000ff] [ 0.177706] pci 0000:05:01.2: supports D1 D2 [ 0.177708] pci 0000:05:01.2: PME# supported from D0 D1 D2 D3hot [ 0.177773] pci 0000:05:02.0: [1106:3038] type 00 class 0x0c0300 [ 0.177826] pci 0000:05:02.0: reg 0x20: [io 0xa800-0xa81f] [ 0.177875] pci 0000:05:02.0: supports D1 D2 [ 0.177877] pci 0000:05:02.0: PME# supported from D0 D1 D2 D3hot [ 0.177938] pci 0000:05:02.1: [1106:3038] type 00 class 0x0c0300 [ 0.177991] pci 0000:05:02.1: reg 0x20: [io 0xac00-0xac1f] [ 0.178040] pci 0000:05:02.1: supports D1 D2 [ 0.178042] pci 0000:05:02.1: PME# supported from D0 D1 D2 D3hot [ 0.178100] pci 0000:05:02.2: [1106:3104] type 00 class 0x0c0320 [ 0.178121] pci 0000:05:02.2: reg 0x10: [mem 0xd6001000-0xd60010ff] [ 0.178203] pci 0000:05:02.2: supports D1 D2 [ 0.178205] pci 0000:05:02.2: PME# supported from D0 D1 D2 D3hot [ 0.178301] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode) [ 0.178304] pci 0000:00:1e.0: bridge window [io 0xa000-0xafff] [ 0.178308] pci 0000:00:1e.0: bridge window [mem 0xd6000000-0xd60fffff] [ 0.178314] pci 0000:00:1e.0: bridge window [mem 0xd6100000-0xd61fffff 64bit pref] [ 0.178316] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.178318] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.178320] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.178322] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode) [ 0.178324] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff window] (subtractive decode) [ 0.179328] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.179445] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.179560] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.179676] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.179791] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 9 10 11 12 14 15) [ 0.179905] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.180029] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.180145] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.180728] SCSI subsystem initialized [ 0.180750] libata version 3.00 loaded. [ 0.180750] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.180750] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.180750] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.180750] vgaarb: loaded [ 0.180750] ACPI: bus type USB registered [ 0.180750] usbcore: registered new interface driver usbfs [ 0.180750] usbcore: registered new interface driver hub [ 0.180750] usbcore: registered new device driver usb [ 0.180750] EDAC MC: Ver: 3.0.0 [ 0.180750] PCI: Using ACPI for IRQ routing [ 0.181552] PCI: pci_cache_line_size set to 64 bytes [ 0.181634] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff] [ 0.181636] e820: reserve RAM buffer [mem 0x7fff0000-0x7fffffff] [ 0.181801] NetLabel: Initializing [ 0.181803] NetLabel: domain hash size = 128 [ 0.181804] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.181830] NetLabel: unlabeled traffic allowed by default [ 0.181862] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.181862] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.181862] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.185023] clocksource: Switched to clocksource hpet [ 0.206109] VFS: Disk quotas dquot_6.6.0 [ 0.206139] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.206333] AppArmor: AppArmor Filesystem Enabled [ 0.206387] pnp: PnP ACPI init [ 0.206725] system 00:00: [io 0x04d0-0x04d1] has been reserved [ 0.206728] system 00:00: [io 0x0290-0x029f] has been reserved [ 0.206730] system 00:00: [io 0x0800-0x087f] has been reserved [ 0.206732] system 00:00: [io 0x0290-0x0294] has been reserved [ 0.206735] system 00:00: [io 0x0880-0x088f] has been reserved [ 0.206743] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.206857] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.207095] pnp 00:02: [dma 2] [ 0.207141] pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.207508] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.207901] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.208137] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.208205] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.208326] system 00:07: [io 0x0400-0x04bf] could not be reserved [ 0.208333] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.208727] system 00:08: [mem 0xf0000000-0xf3ffffff] has been reserved [ 0.208734] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.209052] system 00:09: [mem 0x000f0000-0x000f3fff] could not be reserved [ 0.209054] system 00:09: [mem 0x000f4000-0x000f7fff] could not be reserved [ 0.209057] system 00:09: [mem 0x000f8000-0x000fbfff] could not be reserved [ 0.209059] system 00:09: [mem 0x000fc000-0x000fffff] could not be reserved [ 0.209061] system 00:09: [mem 0x7fff0000-0x7fffffff] could not be reserved [ 0.209063] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.209066] system 00:09: [mem 0x00100000-0x7ffeffff] could not be reserved [ 0.209068] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.209070] system 00:09: [mem 0xfed13000-0xfed1dfff] has been reserved [ 0.209072] system 00:09: [mem 0xfed20000-0xfed8ffff] has been reserved [ 0.209075] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.209077] system 00:09: [mem 0xffb00000-0xffb7ffff] has been reserved [ 0.209083] system 00:09: [mem 0xfff00000-0xffffffff] has been reserved [ 0.209086] system 00:09: [mem 0x000e0000-0x000effff] has been reserved [ 0.209093] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.209103] pnp: PnP ACPI: found 10 devices [ 0.216327] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.216347] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000 [ 0.216350] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000 [ 0.216354] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000 [ 0.216357] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000 [ 0.216371] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80000000-0x801fffff] [ 0.216377] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref] [ 0.216381] pci 0000:00:1c.2: BAR 15: assigned [mem 0x80400000-0x805fffff 64bit pref] [ 0.216385] pci 0000:00:1c.3: BAR 15: assigned [mem 0x80600000-0x807fffff 64bit pref] [ 0.216390] pci 0000:01:00.0: BAR 6: assigned [mem 0xd0000000-0xd001ffff pref] [ 0.216392] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.216396] pci 0000:00:01.0: bridge window [io 0x7000-0x7fff] [ 0.216400] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd1ffffff] [ 0.216403] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.216408] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.216410] pci 0000:00:1c.0: bridge window [io 0x6000-0x6fff] [ 0.216415] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff] [ 0.216419] pci 0000:00:1c.0: bridge window [mem 0x80200000-0x803fffff 64bit pref] [ 0.216425] pci 0000:03:00.0: BAR 6: assigned [mem 0xd2000000-0xd207ffff pref] [ 0.216427] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 0.216430] pci 0000:00:1c.2: bridge window [io 0x8000-0x8fff] [ 0.216435] pci 0000:00:1c.2: bridge window [mem 0xd2000000-0xd3ffffff] [ 0.216438] pci 0000:00:1c.2: bridge window [mem 0x80400000-0x805fffff 64bit pref] [ 0.216445] pci 0000:04:00.0: BAR 6: assigned [mem 0xd4000000-0xd400ffff pref] [ 0.216447] pci 0000:00:1c.3: PCI bridge to [bus 04] [ 0.216449] pci 0000:00:1c.3: bridge window [io 0x9000-0x9fff] [ 0.216454] pci 0000:00:1c.3: bridge window [mem 0xd4000000-0xd5ffffff] [ 0.216458] pci 0000:00:1c.3: bridge window [mem 0x80600000-0x807fffff 64bit pref] [ 0.216467] pci 0000:00:1e.0: PCI bridge to [bus 05] [ 0.216470] pci 0000:00:1e.0: bridge window [io 0xa000-0xafff] [ 0.216474] pci 0000:00:1e.0: bridge window [mem 0xd6000000-0xd60fffff] [ 0.216478] pci 0000:00:1e.0: bridge window [mem 0xd6100000-0xd61fffff 64bit pref] [ 0.216485] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.216487] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.216489] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.216490] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window] [ 0.216492] pci_bus 0000:00: resource 8 [mem 0x80000000-0xfebfffff window] [ 0.216494] pci_bus 0000:01: resource 0 [io 0x7000-0x7fff] [ 0.216496] pci_bus 0000:01: resource 1 [mem 0xd0000000-0xd1ffffff] [ 0.216498] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.216500] pci_bus 0000:02: resource 0 [io 0x6000-0x6fff] [ 0.216502] pci_bus 0000:02: resource 1 [mem 0x80000000-0x801fffff] [ 0.216503] pci_bus 0000:02: resource 2 [mem 0x80200000-0x803fffff 64bit pref] [ 0.216505] pci_bus 0000:03: resource 0 [io 0x8000-0x8fff] [ 0.216507] pci_bus 0000:03: resource 1 [mem 0xd2000000-0xd3ffffff] [ 0.216509] pci_bus 0000:03: resource 2 [mem 0x80400000-0x805fffff 64bit pref] [ 0.216511] pci_bus 0000:04: resource 0 [io 0x9000-0x9fff] [ 0.216513] pci_bus 0000:04: resource 1 [mem 0xd4000000-0xd5ffffff] [ 0.216514] pci_bus 0000:04: resource 2 [mem 0x80600000-0x807fffff 64bit pref] [ 0.216516] pci_bus 0000:05: resource 0 [io 0xa000-0xafff] [ 0.216518] pci_bus 0000:05: resource 1 [mem 0xd6000000-0xd60fffff] [ 0.216520] pci_bus 0000:05: resource 2 [mem 0xd6100000-0xd61fffff 64bit pref] [ 0.216521] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window] [ 0.216523] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window] [ 0.216525] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.216527] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff window] [ 0.216529] pci_bus 0000:05: resource 8 [mem 0x80000000-0xfebfffff window] [ 0.216664] NET: Registered protocol family 2 [ 0.216934] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.216999] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 0.217092] TCP: Hash tables configured (established 16384 bind 16384) [ 0.217154] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 0.217169] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 0.217240] NET: Registered protocol family 1 [ 0.218231] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.218243] pci 0000:01:00.1: Linked as a consumer to 0000:01:00.0 [ 0.218245] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0 [ 0.219183] PCI: CLS 32 bytes, default 64 [ 0.219268] Unpacking initramfs... [ 1.006777] Freeing initrd memory: 39748K [ 1.007058] Scanning for low memory corruption every 60 seconds [ 1.007963] Initialise system trusted keyrings [ 1.007979] Key type blacklist registered [ 1.008097] workingset: timestamp_bits=36 max_order=19 bucket_order=0 [ 1.010267] zbud: loaded [ 1.011077] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.011341] fuse init (API version 7.26) [ 1.013538] Key type asymmetric registered [ 1.013541] Asymmetric key parser 'x509' registered [ 1.013631] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 1.013677] io scheduler noop registered [ 1.013678] io scheduler deadline registered [ 1.013728] io scheduler cfq registered (default) [ 1.014913] vesafb: mode is 640x480x32, linelength=2560, pages=0 [ 1.014914] vesafb: scrolling: redraw [ 1.014916] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 1.014936] vesafb: framebuffer at 0xc0000000, mapped to 0x (ptrval), using 1216k, total 1216k [ 1.015101] Console: switching to colour frame buffer device 80x30 [ 1.015118] fb0: VESA VGA frame buffer device [ 1.015141] intel_idle: does not run on family 6 model 15 [ 1.015260] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.015275] ACPI: Power Button [PWRB] [ 1.015350] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.015383] ACPI: Power Button [PWRF] [ 1.015903] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.036374] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.039402] Linux agpgart interface v0.103 [ 1.041857] loop: module loaded [ 1.042085] ata_piix 0000:00:1f.2: version 2.13 [ 1.042236] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] [ 1.043579] scsi host0: ata_piix [ 1.043720] scsi host1: ata_piix [ 1.043775] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 1.043777] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 1.044048] libphy: Fixed MDIO Bus: probed [ 1.044050] tun: Universal TUN/TAP device driver, 1.6 [ 1.044125] PPP generic driver version 2.4.2 [ 1.044192] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.044199] ehci-pci: EHCI PCI platform driver [ 1.044403] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 1.044412] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 1.048334] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported [ 1.048357] ehci-pci 0000:00:1d.7: irq 23, io mem 0xd6204000 [ 1.064045] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.064166] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.064175] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.064178] usb usb1: Product: EHCI Host Controller [ 1.064180] usb usb1: Manufacturer: Linux 4.15.0-143-generic ehci_hcd [ 1.064181] usb usb1: SerialNumber: 0000:00:1d.7 [ 1.064347] hub 1-0:1.0: USB hub found [ 1.064356] hub 1-0:1.0: 8 ports detected [ 1.064748] ehci-pci 0000:05:01.2: EHCI Host Controller [ 1.064755] ehci-pci 0000:05:01.2: new USB bus registered, assigned bus number 2 [ 1.064811] ehci-pci 0000:05:01.2: irq 16, io mem 0xd6000000 [ 1.080064] ehci-pci 0000:05:01.2: USB 2.0 started, EHCI 1.00 [ 1.080145] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.080149] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.080152] usb usb2: Product: EHCI Host Controller [ 1.080155] usb usb2: Manufacturer: Linux 4.15.0-143-generic ehci_hcd [ 1.080158] usb usb2: SerialNumber: 0000:05:01.2 [ 1.080319] hub 2-0:1.0: USB hub found [ 1.080328] hub 2-0:1.0: 4 ports detected [ 1.080630] ehci-pci 0000:05:02.2: EHCI Host Controller [ 1.080637] ehci-pci 0000:05:02.2: new USB bus registered, assigned bus number 3 [ 1.080688] ehci-pci 0000:05:02.2: irq 20, io mem 0xd6001000 [ 1.096064] ehci-pci 0000:05:02.2: USB 2.0 started, EHCI 1.00 [ 1.096161] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.096165] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.096168] usb usb3: Product: EHCI Host Controller [ 1.096177] usb usb3: Manufacturer: Linux 4.15.0-143-generic ehci_hcd [ 1.096178] usb usb3: SerialNumber: 0000:05:02.2 [ 1.096324] hub 3-0:1.0: USB hub found [ 1.096332] hub 3-0:1.0: 4 ports detected [ 1.096518] ehci-platform: EHCI generic platform driver [ 1.096540] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.096544] ohci-pci: OHCI PCI platform driver [ 1.096564] ohci-platform: OHCI generic platform driver [ 1.096574] uhci_hcd: USB Universal Host Controller Interface driver [ 1.096710] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.096718] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 1.096725] uhci_hcd 0000:00:1d.0: detected 2 ports [ 1.096746] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000bc00 [ 1.096807] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.096809] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.096811] usb usb4: Product: UHCI Host Controller [ 1.096813] usb usb4: Manufacturer: Linux 4.15.0-143-generic uhci_hcd [ 1.096815] usb usb4: SerialNumber: 0000:00:1d.0 [ 1.096960] hub 4-0:1.0: USB hub found [ 1.096969] hub 4-0:1.0: 2 ports detected [ 1.097200] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.097212] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5 [ 1.097218] uhci_hcd 0000:00:1d.1: detected 2 ports [ 1.097249] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b000 [ 1.097309] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.097311] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.097313] usb usb5: Product: UHCI Host Controller [ 1.097315] usb usb5: Manufacturer: Linux 4.15.0-143-generic uhci_hcd [ 1.097316] usb usb5: SerialNumber: 0000:00:1d.1 [ 1.097460] hub 5-0:1.0: USB hub found [ 1.097469] hub 5-0:1.0: 2 ports detected [ 1.097706] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.097713] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6 [ 1.097720] uhci_hcd 0000:00:1d.2: detected 2 ports [ 1.097748] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b400 [ 1.097816] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.097819] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.097821] usb usb6: Product: UHCI Host Controller [ 1.097822] usb usb6: Manufacturer: Linux 4.15.0-143-generic uhci_hcd [ 1.097824] usb usb6: SerialNumber: 0000:00:1d.2 [ 1.097976] hub 6-0:1.0: USB hub found [ 1.097984] hub 6-0:1.0: 2 ports detected [ 1.098223] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 1.098230] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 7 [ 1.098237] uhci_hcd 0000:00:1d.3: detected 2 ports [ 1.098256] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000b800 [ 1.098319] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.098322] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.098323] usb usb7: Product: UHCI Host Controller [ 1.098325] usb usb7: Manufacturer: Linux 4.15.0-143-generic uhci_hcd [ 1.098327] usb usb7: SerialNumber: 0000:00:1d.3 [ 1.098466] hub 7-0:1.0: USB hub found [ 1.098475] hub 7-0:1.0: 2 ports detected [ 1.098713] uhci_hcd 0000:05:01.0: UHCI Host Controller [ 1.098720] uhci_hcd 0000:05:01.0: new USB bus registered, assigned bus number 8 [ 1.098727] uhci_hcd 0000:05:01.0: detected 2 ports [ 1.098747] uhci_hcd 0000:05:01.0: irq 19, io base 0x0000a000 [ 1.098808] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.098810] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.098812] usb usb8: Product: UHCI Host Controller [ 1.098814] usb usb8: Manufacturer: Linux 4.15.0-143-generic uhci_hcd [ 1.098816] usb usb8: SerialNumber: 0000:05:01.0 [ 1.098954] hub 8-0:1.0: USB hub found [ 1.098962] hub 8-0:1.0: 2 ports detected [ 1.099190] uhci_hcd 0000:05:01.1: UHCI Host Controller [ 1.099198] uhci_hcd 0000:05:01.1: new USB bus registered, assigned bus number 9 [ 1.099209] uhci_hcd 0000:05:01.1: detected 2 ports [ 1.099228] uhci_hcd 0000:05:01.1: irq 18, io base 0x0000a400 [ 1.099288] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.099291] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.099293] usb usb9: Product: UHCI Host Controller [ 1.099294] usb usb9: Manufacturer: Linux 4.15.0-143-generic uhci_hcd [ 1.099296] usb usb9: SerialNumber: 0000:05:01.1 [ 1.099432] hub 9-0:1.0: USB hub found [ 1.099440] hub 9-0:1.0: 2 ports detected [ 1.099663] uhci_hcd 0000:05:02.0: UHCI Host Controller [ 1.099670] uhci_hcd 0000:05:02.0: new USB bus registered, assigned bus number 10 [ 1.099676] uhci_hcd 0000:05:02.0: detected 2 ports [ 1.099695] uhci_hcd 0000:05:02.0: irq 18, io base 0x0000a800 [ 1.099758] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.099760] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.099762] usb usb10: Product: UHCI Host Controller [ 1.099764] usb usb10: Manufacturer: Linux 4.15.0-143-generic uhci_hcd [ 1.099766] usb usb10: SerialNumber: 0000:05:02.0 [ 1.099902] hub 10-0:1.0: USB hub found [ 1.099910] hub 10-0:1.0: 2 ports detected [ 1.100154] uhci_hcd 0000:05:02.1: UHCI Host Controller [ 1.100161] uhci_hcd 0000:05:02.1: new USB bus registered, assigned bus number 11 [ 1.100168] uhci_hcd 0000:05:02.1: detected 2 ports [ 1.100187] uhci_hcd 0000:05:02.1: irq 16, io base 0x0000ac00 [ 1.100249] usb usb11: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.100252] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.100254] usb usb11: Product: UHCI Host Controller [ 1.100256] usb usb11: Manufacturer: Linux 4.15.0-143-generic uhci_hcd [ 1.100258] usb usb11: SerialNumber: 0000:05:02.1 [ 1.100398] hub 11-0:1.0: USB hub found [ 1.100407] hub 11-0:1.0: 2 ports detected [ 1.100644] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.101090] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.101166] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.101359] mousedev: PS/2 mouse device common for all mice [ 1.101613] rtc_cmos 00:01: RTC can wake from S4 [ 1.101744] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 1.101771] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs [ 1.101783] i2c /dev entries driver [ 1.101876] device-mapper: uevent: version 1.0.3 [ 1.101972] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 1.102000] ledtrig-cpu: registered to indicate activity on CPUs [ 1.102501] NET: Registered protocol family 10 [ 1.109441] Segment Routing with IPv6 [ 1.109479] NET: Registered protocol family 17 [ 1.109535] Key type dns_resolver registered [ 1.109773] mce: Using 6 MCE banks [ 1.109801] RAS: Correctable Errors collector initialized. [ 1.109858] microcode: sig=0x6fd, pf=0x1, revision=0xa4 [ 1.109927] microcode: Microcode Update Driver: v2.2. [ 1.109940] sched_clock: Marking stable (1109919839, 0)->(1091249225, 18670614) [ 1.110172] registered taskstats version 1 [ 1.110186] Loading compiled-in X.509 certificates [ 1.114870] Loaded X.509 cert 'Build time autogenerated kernel key: de118354fe72448b469776565e76ac30c08e8db2' [ 1.116251] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969' [ 1.117596] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19' [ 1.117640] zswap: loaded using pool lzo/zbud [ 1.124202] Key type big_key registered [ 1.124209] Key type trusted registered [ 1.124775] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 1.127645] Key type encrypted registered [ 1.127651] AppArmor: AppArmor sha1 policy hashing enabled [ 1.127655] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 1.127665] ima: Allocated hash algorithm: sha1 [ 1.127695] evm: HMAC attrs: 0x1 [ 1.128216] Magic number: 9:141:728 [ 1.128392] rtc_cmos 00:01: setting system clock to 2021-06-20 09:42:44 UTC (1624182164) [ 1.128786] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.128787] EDD information not available. [ 1.202733] ata2.00: ATAPI: ASUS DRW-0402P/D, 1.05, max UDMA/33 [ 1.203072] ata1.00: HPA detected: current 488395055, native 488397168 [ 1.203076] ata1.00: ATA-8: Hitachi HDP725025GLA380, GM2OA52A, max UDMA/133 [ 1.203078] ata1.00: 488395055 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.205347] ata2.00: configured for UDMA/33 [ 1.207917] ata1.00: configured for UDMA/133 [ 1.208226] scsi 0:0:0:0: Direct-Access ATA Hitachi HDP72502 A52A PQ: 0 ANSI: 5 [ 1.208483] sd 0:0:0:0: [sda] 488395055 512-byte logical blocks: (250 GB/233 GiB) [ 1.208498] sd 0:0:0:0: [sda] Write Protect is off [ 1.208500] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.208513] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.208523] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.212142] scsi 1:0:0:0: CD-ROM ASUS DRW-0402P/D 1.05 PQ: 0 ANSI: 5 [ 1.227970] sda: sda1 [ 1.228346] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.290690] sr 1:0:0:0: [sr0] scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray [ 1.290693] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.290896] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.290988] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.295987] Freeing unused kernel image memory: 2444K [ 1.308082] Write protecting the kernel read-only data: 20480k [ 1.309389] Freeing unused kernel image memory: 2008K [ 1.310377] Freeing unused kernel image memory: 1828K [ 1.323837] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.323944] x86/mm: Checking user space page tables [ 1.337125] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.416041] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.432039] usb 3-1: new high-speed USB device number 2 using ehci-pci [ 1.481135] Floppy drive(s): fd0 is 1.44M [ 1.502370] sata_sil24 0000:03:00.0: version 1.1 [ 1.506974] FDC 0 is a post-1991 82077 [ 1.507432] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.507453] r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.508346] r8169 0000:04:00.0 eth0: RTL8168b/8111b at 0x (ptrval), 00:1d:7d:c7:76:51, XID 18000000 IRQ 19 [ 1.508349] r8169 0000:04:00.0 eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko] [ 1.508419] scsi host2: sata_sil24 [ 1.515973] scsi host3: sata_sil24 [ 1.516111] ata3: SATA max UDMA/100 host m128@0xd3004000 port 0xd3000000 irq 18 [ 1.516115] ata4: SATA max UDMA/100 host m128@0xd3004000 port 0xd3002000 irq 18 [ 1.570734] r8169 0000:04:00.0 enp4s0: renamed from eth0 [ 1.581034] usb 2-1: New USB device found, idVendor=2040, idProduct=9950 [ 1.581038] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.581042] usb 2-1: Product: WinTV Nova-DT [ 1.581045] usb 2-1: Manufacturer: Hauppauge [ 1.581048] usb 2-1: SerialNumber: 4028916467 [ 1.588904] usb 3-1: New USB device found, idVendor=2040, idProduct=9950 [ 1.588909] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.588912] usb 3-1: Product: WinTV Nova-DT [ 1.588915] usb 3-1: Manufacturer: Hauppauge [ 1.588918] usb 3-1: SerialNumber: 4028917118 [ 1.604041] usb 4-1: new full-speed USB device number 2 using uhci_hcd [ 1.644063] print_req_error: I/O error, dev fd0, sector 0 [ 1.644070] floppy: error 10 while reading block 0 [ 1.802057] usb 4-1: New USB device found, idVendor=55aa, idProduct=b012 [ 1.802062] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.802065] usb 4-1: Product: 8-in-2 [ 1.802068] usb 4-1: Manufacturer: [ 1.802071] usb 4-1: SerialNumber: 4094774016 [ 1.810703] usb-storage 4-1:1.0: USB Mass Storage device detected [ 1.810861] scsi host4: usb-storage 4-1:1.0 [ 1.810987] usbcore: registered new interface driver usb-storage [ 1.813242] usbcore: registered new interface driver uas [ 1.890245] random: fast init done [ 2.016183] tsc: Refined TSC clocksource calibration: 2009.658 MHz [ 2.016191] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1cf7d1c5890, max_idle_ns: 440795238470 ns [ 2.240511] psmouse serio1: trackpoint: IBM TrackPoint firmware: 0x0b, buttons: 3/3 [ 2.253753] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input4 [ 2.253815] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 2.253827] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 2.253857] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 2.300045] usb 1-3: new high-speed USB device number 3 using ehci-pci [ 2.456403] usb 1-3: New USB device found, idVendor=0409, idProduct=005a [ 2.456406] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.456697] hub 1-3:1.0: USB hub found [ 2.456772] hub 1-3:1.0: 4 ports detected [ 2.720026] usb 7-2: new low-speed USB device number 2 using uhci_hcd [ 2.908091] usb 7-2: New USB device found, idVendor=093a, idProduct=2521 [ 2.908095] usb 7-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 2.908098] usb 7-2: Product: USB OPTICAL MOUSE [ 2.925870] hidraw: raw HID events driver (C) Jiri Kosina [ 2.945514] usbcore: registered new interface driver usbhid [ 2.945515] usbhid: USB HID core driver [ 2.949004] input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.3/usb7/7-2/7-2:1.0/0003:093A:2521.0001/input/input5 [ 2.949187] hid-generic 0003:093A:2521.0001: input,hidraw0: USB HID v1.11 Mouse [USB OPTICAL MOUSE] on usb-0000:00:1d.3-2/input0 [ 2.957103] scsi host4: scsi scan: INQUIRY result too short (5), using 36 [ 2.957111] scsi 4:0:0:0: Direct-Access OEI-USB CompactFlash 1.01 PQ: 0 ANSI: 0 [ 3.040143] clocksource: Switched to clocksource tsc [ 3.572047] ata3: SATA link down (SStatus 0 SControl 0) [ 3.581107] scsi 4:0:0:1: Direct-Access OEI-USB SM/MS/SD 1.01 PQ: 0 ANSI: 0 [ 3.581590] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 3.581876] sd 4:0:0:1: Attached scsi generic sg3 type 0 [ 3.604089] sd 4:0:0:1: [sdc] Attached SCSI removable disk [ 3.754069] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 5.624038] ata4: SATA link down (SStatus 0 SControl 0) [ 5.803025] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 7.460713] random: crng init done [ 7.460717] random: 7 urandom warning(s) missed due to ratelimiting [ 7.837773] ip_tables: (C) 2000-2006 Netfilter Core Team [ 7.976725] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 7.996144] systemd[1]: Detected architecture x86-64. [ 8.011946] systemd[1]: Set hostname to <sorbus>. [ 11.024805] systemd[1]: Reached target Remote File Systems. [ 11.025026] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 11.025382] systemd[1]: Created slice System Slice. [ 11.025567] systemd[1]: Listening on Journal Socket (/dev/log). [ 11.025699] systemd[1]: Listening on udev Control Socket. [ 11.025858] systemd[1]: Listening on Journal Socket. [ 11.026139] systemd[1]: Created slice User and Session Slice. [ 11.312444] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 11.982324] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k FS [ 12.315929] lp: driver loaded but no devices found [ 12.334149] systemd-journald[237]: Received request to flush runtime journal from PID 1 [ 12.505641] ppdev: user-space parallel port driver [ 12.545404] parport_pc 00:04: reported by Plug and Play ACPI [ 12.545486] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 12.640203] lp0: using parport0 (interrupt-driven). [ 21.287403] audit: type=1400 audit(1624182184.651:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=331 comm="apparmor_parser" [ 21.287409] audit: type=1400 audit(1624182184.651:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=331 comm="apparmor_parser" [ 21.292245] audit: type=1400 audit(1624182184.659:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=332 comm="apparmor_parser" [ 21.292250] audit: type=1400 audit(1624182184.659:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=332 comm="apparmor_parser" [ 21.292253] audit: type=1400 audit(1624182184.659:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=332 comm="apparmor_parser" [ 21.292256] audit: type=1400 audit(1624182184.659:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=332 comm="apparmor_parser" [ 21.298745] audit: type=1400 audit(1624182184.663:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=337 comm="apparmor_parser" [ 21.298752] audit: type=1400 audit(1624182184.663:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=337 comm="apparmor_parser" [ 21.298756] audit: type=1400 audit(1624182184.663:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=337 comm="apparmor_parser" [ 21.309604] audit: type=1400 audit(1624182184.675:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=339 comm="apparmor_parser" [ 21.395064] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 21.487922] intel_rng: FWH not detected [ 21.511365] media: Linux media interface: v0.10 [ 21.534573] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x000000000000042C-0x000000000000042D (\GP2C) (20170831/utaddress-247) [ 21.534582] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x000000000000042C-0x000000000000042D (\GP2C) (20170831/utaddress-247) [ 21.534587] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 21.534636] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 21.538570] Linux video capture interface: v2.00 [ 21.542170] leds_ss4200: no LED devices found [ 21.543661] snd_bt87x 0000:05:00.1: bt87x0: Using board 1, analog, digital (rate 32000 Hz) [ 21.659807] bttv: driver version 0.9.19 loaded [ 21.659811] bttv: using 8 buffers with 2080k (520 pages) each for capture [ 21.659878] bttv: Bt8xx card found (0) [ 21.663543] bttv: 0: Bt878 (rev 17) at 0000:05:00.0, irq: 20, latency: 32, mmio: 0xd6100000 [ 21.663588] bttv: 0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb [ 21.663590] bttv: 0: using: Hauppauge (bt878) [card=10,autodetected] [ 21.666148] bttv: 0: Hauppauge/Voodoo msp34xx: reset line init [5] [ 21.684296] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 21.704299] tveeprom: Hauppauge model 44805, rev C111, serial# 2321503 [ 21.704302] tveeprom: tuner model is Philips FI1246 MK2 (idx 11, type 1) [ 21.704304] tveeprom: TV standards PAL(I) (eeprom 0x10) [ 21.704305] tveeprom: audio processor is None (idx 0) [ 21.704306] tveeprom: has no radio [ 21.704307] bttv: 0: Hauppauge eeprom indicates model#44805 [ 21.704309] bttv: 0: tuner type=1 [ 21.719097] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in cold state, will try to load a firmware [ 21.720809] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input6 [ 21.721076] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC888: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 21.721079] snd_hda_codec_realtek hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 21.721082] snd_hda_codec_realtek hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 21.721083] snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0 [ 21.721085] snd_hda_codec_realtek hdaudioC0D2: dig-out=0x1e/0x0 [ 21.721087] snd_hda_codec_realtek hdaudioC0D2: inputs: [ 21.721090] snd_hda_codec_realtek hdaudioC0D2: Rear Mic=0x18 [ 21.721092] snd_hda_codec_realtek hdaudioC0D2: Front Mic=0x19 [ 21.721094] snd_hda_codec_realtek hdaudioC0D2: Line=0x1a [ 21.721096] snd_hda_codec_realtek hdaudioC0D2: CD=0x1c [ 21.721098] snd_hda_codec_realtek hdaudioC0D2: dig-in=0x1f [ 21.737498] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 21.737623] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 21.737723] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 21.737818] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 21.737930] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 21.738031] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 21.738128] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 21.749633] [drm] radeon kernel modesetting enabled. [ 21.749723] checking generic (c0000000 130000) vs hw (c0000000 10000000) [ 21.749724] fb: switching to radeondrmfb from VESA VGA [ 21.749781] Console: switching to colour dummy device 80x25 [ 21.754028] [drm] initializing kernel modesetting (TURKS 0x1002:0x6758 0x1043:0x03EA 0x00). [ 21.754196] ATOM BIOS: 6758.13.12.0.9.AS02 [ 21.754357] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used) [ 21.754360] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF [ 21.754365] [drm] Detected VRAM RAM=1024M, BAR=256M [ 21.754366] [drm] RAM width 128bits DDR [ 21.758973] [TTM] Zone kernel: Available graphics memory: 1020634 kiB [ 21.758976] [TTM] Initializing pool allocator [ 21.758984] [TTM] Initializing DMA pool allocator [ 21.759035] [drm] radeon: 1024M of VRAM memory ready [ 21.759037] [drm] radeon: 1024M of GTT memory ready. [ 21.759052] [drm] Loading TURKS Microcode [ 21.780568] bttv: 0: audio absent, no audio device found! [ 21.790295] tuner: 0-0061: Tuner -1 found with type(s) Radio TV. [ 21.797023] tuner-simple 0-0061: creating new instance [ 21.797027] tuner-simple 0-0061: type set to 1 (Philips PAL_I (FI1246 and compatibles)) [ 21.798653] bttv: 0: Setting PLL: 28636363 => 35468950 (needs up to 100ms) [ 21.816125] print_req_error: I/O error, dev fd0, sector 0 [ 21.816132] floppy: error 10 while reading block 0 [ 21.836042] bttv: PLL set ok [ 21.838009] bttv: 0: registered device video0 [ 21.838102] bttv: 0: registered device vbi0 [ 21.900739] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw' [ 21.907329] coretemp coretemp.0: Using relative temperature scale! [ 21.907381] coretemp coretemp.0: Using relative temperature scale! [ 21.914212] intel_powerclamp: No package C-state available [ 21.936858] intel_powerclamp: No package C-state available [ 21.998270] [drm] Internal thermal controller with fan control [ 22.007088] [drm] radeon: dpm initialized [ 22.054707] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 22.071335] [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000). [ 22.071482] radeon 0000:01:00.0: WB enabled [ 22.071487] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x00000000ffe6401a [ 22.071489] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x00000000e3c3b11c [ 22.072302] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0x00000000158b7897 [ 22.072314] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 22.072315] [drm] Driver supports precise vblank timestamp query. [ 22.072317] radeon 0000:01:00.0: radeon: MSI limited to 32-bit [ 22.072392] radeon 0000:01:00.0: radeon: using MSI. [ 22.072440] [drm] radeon: irq initialized. [ 22.089000] [drm] ring test on 0 succeeded in 2 usecs [ 22.089014] [drm] ring test on 3 succeeded in 6 usecs [ 22.149911] dib0700: firmware started successfully. [ 22.236548] gpio_ich: GPIO from 462 to 511 on gpio_ich [ 22.270866] [drm] ring test on 5 succeeded in 2 usecs [ 22.270878] [drm] UVD initialized successfully. [ 22.271367] [drm] ib test on ring 0 succeeded in 0 usecs [ 22.271466] [drm] ib test on ring 3 succeeded in 0 usecs [ 22.656256] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in warm state. [ 22.656442] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 22.656814] dvbdev: DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T) [ 22.785028] usb 2-1: DVB: registering adapter 0 frontend 0 (DiBcom 3000MC/P)... [ 22.793013] MT2060: successfully identified (IF1 = 1204) [ 22.944075] [drm] ib test on ring 5 succeeded [ 22.945410] [drm] Radeon Display Connectors [ 22.945412] [drm] Connector 0: [ 22.945413] [drm] DP-1 [ 22.945414] [drm] HPD4 [ 22.945415] [drm] DDC: 0x6480 0x6480 0x6484 0x6484 0x6488 0x6488 0x648c 0x648c [ 22.945416] [drm] Encoders: [ 22.945417] [drm] DFP1: INTERNAL_UNIPHY2 [ 22.945418] [drm] Connector 1: [ 22.945419] [drm] HDMI-A-1 [ 22.945420] [drm] HPD2 [ 22.945421] [drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c [ 22.945422] [drm] Encoders: [ 22.945423] [drm] DFP2: INTERNAL_UNIPHY2 [ 22.945424] [drm] Connector 2: [ 22.945425] [drm] DVI-I-1 [ 22.945425] [drm] HPD1 [ 22.945427] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c [ 22.945428] [drm] Encoders: [ 22.945429] [drm] DFP3: INTERNAL_UNIPHY [ 22.945430] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 23.017155] [drm] fb mappable at 0xC0363000 [ 23.017157] [drm] vram apper at 0xC0000000 [ 23.017158] [drm] size 5242880 [ 23.017159] [drm] fb depth is 24 [ 23.017160] [drm] pitch is 5120 [ 23.017280] fbcon: radeondrmfb (fb0) is primary device [ 23.017454] Console: switching to colour frame buffer device 160x64 [ 23.017501] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device [ 23.032291] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0 [ 23.362709] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 23.362841] dvbdev: DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T) [ 23.369352] usb 2-1: DVB: registering adapter 1 frontend 0 (DiBcom 3000MC/P)... [ 23.374097] MT2060: successfully identified (IF1 = 1207) [ 24.044026] Registered IR keymap rc-dib0700-rc5 [ 24.048253] rc rc0: Hauppauge Nova-T 500 Dual DVB-T as /devices/pci0000:00/0000:00:1e.0/0000:05:01.2/usb2/2-1/rc/rc0 [ 24.048319] input: Hauppauge Nova-T 500 Dual DVB-T as /devices/pci0000:00/0000:00:1e.0/0000:05:01.2/usb2/2-1/rc/rc0/input14 [ 24.048404] dvb-usb: schedule remote query interval to 50 msecs. [ 24.048408] dvb-usb: Hauppauge Nova-T 500 Dual DVB-T successfully initialized and connected. [ 24.048703] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in cold state, will try to load a firmware [ 24.048778] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw' [ 24.255848] dib0700: firmware started successfully. [ 24.768199] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in warm state. [ 24.768409] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 24.768559] dvbdev: DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T) [ 24.896590] usb 3-1: DVB: registering adapter 2 frontend 0 (DiBcom 3000MC/P)... [ 24.900333] MT2060: successfully identified (IF1 = 1229) [ 25.463019] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 25.463151] dvbdev: DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T) [ 25.472791] usb 3-1: DVB: registering adapter 3 frontend 0 (DiBcom 3000MC/P)... [ 25.479666] MT2060: successfully identified (IF1 = 1238) [ 26.128882] Registered IR keymap rc-dib0700-rc5 [ 26.129186] rc rc1: Hauppauge Nova-T 500 Dual DVB-T as /devices/pci0000:00/0000:00:1e.0/0000:05:02.2/usb3/3-1/rc/rc1 [ 26.129281] input: Hauppauge Nova-T 500 Dual DVB-T as /devices/pci0000:00/0000:00:1e.0/0000:05:02.2/usb3/3-1/rc/rc1/input15 [ 26.129390] dvb-usb: schedule remote query interval to 50 msecs. [ 26.129393] dvb-usb: Hauppauge Nova-T 500 Dual DVB-T successfully initialized and connected. [ 26.131217] usbcore: registered new interface driver dvb_usb_dib0700 [ 32.996081] radeon_dp_aux_transfer_native: 74 callbacks suppressed [ 35.266875] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready [ 35.304172] r8169 0000:04:00.0 enp4s0: link down [ 35.304177] r8169 0000:04:00.0 enp4s0: link down [ 35.304427] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready [ 36.977247] r8169 0000:04:00.0 enp4s0: link up [ 36.977262] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready [ 37.163238] r8169 0000:04:00.0 enp4s0: link down [ 38.780712] r8169 0000:04:00.0 enp4s0: link up [ 170.471875] perf: interrupt took too long (2512 > 2500), lowering kernel.perf_event_max_sample_rate to 79500 [ 236.216616] perf: interrupt took too long (3156 > 3140), lowering kernel.perf_event_max_sample_rate to 63250 [ 334.079424] perf: interrupt took too long (3949 > 3945), lowering kernel.perf_event_max_sample_rate to 50500 [ 424.688394] kauditd_printk_skb: 12 callbacks suppressed [ 424.688398] audit: type=1400 audit(1624182614.056:24): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=8742 comm="apparmor_parser" [ 424.689263] audit: type=1400 audit(1624182614.056:25): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=8742 comm="apparmor_parser" [ 424.690094] audit: type=1400 audit(1624182614.060:26): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=8742 comm="apparmor_parser" [ 424.690859] audit: type=1400 audit(1624182614.060:27): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=8742 comm="apparmor_parser" [ 559.696720] perf: interrupt took too long (4979 > 4936), lowering kernel.perf_event_max_sample_rate to 40000 [ 691.638185] SGI XFS with ACLs, security attributes, realtime, no debug enabled [ 691.648056] JFS: nTxBlock = 8192, nTxLock = 65536 [ 691.868210] ntfs: driver 2.1.32 [Flags: R/O MODULE]. [ 692.043203] QNX4 filesystem 0.2.3 registered. [ 692.136710] raid6: sse2x1 gen() 2784 MB/s [ 692.184708] raid6: sse2x1 xor() 3304 MB/s [ 692.232709] raid6: sse2x2 gen() 3571 MB/s [ 692.280705] raid6: sse2x2 xor() 4031 MB/s [ 692.328707] raid6: sse2x4 gen() 6004 MB/s [ 692.376699] raid6: sse2x4 xor() 4459 MB/s [ 692.376701] raid6: using algorithm sse2x4 gen() 6004 MB/s [ 692.376702] raid6: .... xor() 4459 MB/s, rmw enabled [ 692.376704] raid6: using ssse3x2 recovery algorithm [ 692.378774] xor: measuring software checksum speed [ 692.416719] prefetch64-sse: 7804.000 MB/sec [ 692.456699] generic_sse: 6950.000 MB/sec [ 692.456701] xor: using function: prefetch64-sse (7804.000 MB/sec) [ 692.504363] Btrfs loaded, crc32c=crc32c-generic
Picking through that log will probably tell you much more than you ever wanted to know about the system.
System Information - Debian Linux 11 (bullseye)
Debian Linux 11 (bullseye), released 14-Aug-2021, uses a more recent kernel (Linux 5.10.0), and supports older BIOS based systems as well as UEFI. So let's see what this Linux has to say about this system...
Note: these results used a memory configuration with two Kingston ValueRAM KVR667D2N5/2G (2 GiB, DDR2-667, CL5, double sided) DIMMs, providing a total of 3 GiB of RAM to the operating system at DDR2-667 speeds.
uname & lsb_release
Operating system release and version information:
$ uname -a Linux sorbus 5.10.0-22-amd64 #1 SMP Debian 5.10.178-3 (2023-04-22) x86_64 GNU/Linux
So a "Linux" kernel, on a node named "sorbus", kernel release "5.10.0-22-amd64" (a patched 5.10.0 kernel for amd64 i>aka. x86_64), version "#1 SMP Debian 5.10.178-3 (2023-04-22)", machine type "x86_64", for operating system "GNU/Linux".
$ lsb_release -a No LSB modules are available. Distributor ID: Debian Description: Debian GNU/Linux 11 (bullseye) Release: 11 Codename: bullseye
And the Linux operating system is a Debian Linux 11 (bullseye) distribution.
lscpu & /proc/cpuinfo
Processor information:
$ lscpu
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
Address sizes: 36 bits physical, 48 bits virtual
CPU(s): 2
On-line CPU(s) list: 0,1
Thread(s) per core: 1
Core(s) per socket: 2
Socket(s): 1
NUMA node(s): 1
Vendor ID: GenuineIntel
CPU family: 6
Model: 15
Model name: Intel(R) Pentium(R) Dual CPU E2180 @ 2.00GHz
Stepping: 13
CPU MHz: 1317.680
CPU max MHz: 2000.0000
CPU min MHz: 1200.0000
BogoMIPS: 4019.31
L1d cache: 64 KiB
L1i cache: 64 KiB
L2 cache: 1 MiB
NUMA node0 CPU(s): 0,1
Vulnerability Itlb multihit: KVM: Mitigation: VMX unsupported
Vulnerability L1tf: Mitigation; PTE Inversion
Vulnerability Mds: Vulnerable: Clear CPU buffers attempted, no microcode; SMT disabled
Vulnerability Meltdown: Mitigation; PTI
Vulnerability Mmio stale data: Unknown: No mitigations
Vulnerability Retbleed: Not affected
Vulnerability Spec store bypass: Vulnerable
Vulnerability Spectre v1: Mitigation; usercopy/swapgs barriers and __user pointer sanitization
Vulnerability Spectre v2: Mitigation; Retpolines, STIBP disabled, RSB filling, PBRSB-eIBRS Not affected
Vulnerability Srbds: Not affected
Vulnerability Tsx async abort: Not affected
Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ht tm pbe syscall nx lm constant_tsc arch_perfmon
pebs bts rep_good nopl cpuid aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm lahf_lm pti dtherm
The expected details for the Intel E2180. Since this is a dual core processor the /proc/cpuinfo provides details for both cores:
$ cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Pentium(R) Dual CPU E2180 @ 2.00GHz stepping : 13 microcode : 0xa4 cpu MHz : 1317.680 cache size : 1024 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl cpuid aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm lahf_lm pti dtherm bugs : cpu_meltdown spectre_v1 spectre_v2 spec_store_bypass l1tf mds swapgs itlb_multihit mmio_unknown bogomips : 4019.31 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Pentium(R) Dual CPU E2180 @ 2.00GHz stepping : 13 microcode : 0xa4 cpu MHz : 1217.224 cache size : 1024 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 apicid : 1 initial apicid : 1 fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl cpuid aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm lahf_lm pti dtherm bugs : cpu_meltdown spectre_v1 spectre_v2 spec_store_bypass l1tf mds swapgs itlb_multihit mmio_unknown bogomips : 4019.31 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management:
Still the Linux 5.10.0 kernel reports more CPU details than seen in earlier kernel versions.
lsmem & /proc/meminfo
Memory overview:
$ lsmem RANGE SIZE STATE REMOVABLE BLOCK 0x0000000000000000-0x00000000bfffffff 3G online yes 0-23 Memory block size: 128M Total online memory: 3G Total offline memory: 0B
More information about the usage of memory is available from the kernel:
$ cat /proc/meminfo MemTotal: 3047344 kB MemFree: 2251724 kB MemAvailable: 2737052 kB Buffers: 164012 kB Cached: 437860 kB SwapCached: 0 kB Active: 406292 kB Inactive: 260304 kB Active(anon): 1008 kB Inactive(anon): 65240 kB Active(file): 405284 kB Inactive(file): 195064 kB Unevictable: 0 kB Mlocked: 0 kB SwapTotal: 999420 kB SwapFree: 999420 kB Dirty: 136 kB Writeback: 0 kB AnonPages: 64828 kB Mapped: 69600 kB Shmem: 1424 kB KReclaimable: 40788 kB Slab: 68392 kB SReclaimable: 40788 kB SUnreclaim: 27604 kB KernelStack: 2112 kB PageTables: 2312 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 2523092 kB Committed_AS: 413612 kB VmallocTotal: 34359738367 kB VmallocUsed: 26024 kB VmallocChunk: 0 kB Percpu: 1296 kB HardwareCorrupted: 0 kB AnonHugePages: 20480 kB ShmemHugePages: 0 kB ShmemPmdMapped: 0 kB FileHugePages: 0 kB FilePmdMapped: 0 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB Hugetlb: 0 kB DirectMap4k: 120768 kB DirectMap2M: 3024896 kB
Shows the expected 3 GiB of available installed memory.
lspci & /proc/bus/pci/devices
List PCI & PCIe devices:
$ lspci -tv
-[0000:00]-+-00.0 Intel Corporation 82945G/GZ/P/PL Memory Controller Hub
+-01.0-[01]--+-00.0 Advanced Micro Devices, Inc. [AMD/ATI] Juniper XT [Radeon HD 5770]
| \-00.1 Advanced Micro Devices, Inc. [AMD/ATI] Juniper HDMI Audio [Radeon HD 5700 Series]
+-1b.0 Intel Corporation NM10/ICH7 Family High Definition Audio Controller
+-1c.0-[02]--
+-1c.1-[03]----00.0 Silicon Image, Inc. SiI 3132 Serial ATA Raid II Controller
+-1c.2-[04]----00.0 Philips Semiconductors SAA7231
+-1c.3-[05]----00.0 Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
+-1d.0 Intel Corporation NM10/ICH7 Family USB UHCI Controller #1
+-1d.1 Intel Corporation NM10/ICH7 Family USB UHCI Controller #2
+-1d.2 Intel Corporation NM10/ICH7 Family USB UHCI Controller #3
+-1d.3 Intel Corporation NM10/ICH7 Family USB UHCI Controller #4
+-1d.7 Intel Corporation NM10/ICH7 Family USB2 EHCI Controller
+-1e.0-[06]--+-00.0 Brooktree Corporation Bt878 Video Capture
| +-00.1 Brooktree Corporation Bt878 Audio Capture
| +-01.0 VIA Technologies, Inc. VT82xx/62xx UHCI USB 1.1 Controller
| +-01.1 VIA Technologies, Inc. VT82xx/62xx UHCI USB 1.1 Controller
| +-01.2 VIA Technologies, Inc. USB 2.0
| +-02.0 VIA Technologies, Inc. VT82xx/62xx UHCI USB 1.1 Controller
| +-02.1 VIA Technologies, Inc. VT82xx/62xx UHCI USB 1.1 Controller
| \-02.2 VIA Technologies, Inc. USB 2.0
+-1f.0 Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge
+-1f.1 Intel Corporation 82801G (ICH7 Family) IDE Controller
+-1f.2 Intel Corporation NM10/ICH7 Family SATA Controller [IDE mode]
\-1f.3 Intel Corporation NM10/ICH7 Family SMBus Controller
$ sudo lspci -v
00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02)
Subsystem: Gigabyte Technology Co., Ltd 82945G/GZ/P/PL Memory Controller Hub
Flags: bus master, fast devsel, latency 0
Capabilities: [e0] Vendor Specific Information: Len=09 <?>
00:01.0 PCI bridge: Intel Corporation 82945G/GZ/P/PL PCI Express Root Port (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 16
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00007000-00007fff [size=4K]
Memory behind bridge: d0000000-d1ffffff [size=32M]
Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff [size=256M]
Capabilities: [88] Subsystem: Gigabyte Technology Co., Ltd 82945G/GZ/P/PL PCI Express Root Port
Capabilities: [80] Power Management version 2
Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit-
Capabilities: [a0] Express Root Port (Slot+), MSI 00
Capabilities: [100] Virtual Channel
Capabilities: [140] Root Complex Link
Kernel driver in use: pcieport
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 01)
Subsystem: Gigabyte Technology Co., Ltd GA-D525TUD (Realtek ALC887)
Flags: bus master, fast devsel, latency 0, IRQ 25
Memory at d6a00000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
Capabilities: [100] Virtual Channel
Capabilities: [130] Root Complex Link
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 01) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 16
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00006000-00006fff [size=4K]
Memory behind bridge: d6b00000-d6cfffff [size=2M]
Prefetchable memory behind bridge: 00000000d6d00000-00000000d6efffff [size=2M]
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Capabilities: [90] Subsystem: Gigabyte Technology Co., Ltd NM10/ICH7 Family PCI Express Port 1
Capabilities: [a0] Power Management version 2
Capabilities: [100] Virtual Channel
Capabilities: [180] Root Complex Link
Kernel driver in use: pcieport
00:1c.1 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 2 (rev 01) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 17
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00008000-00008fff [size=4K]
Memory behind bridge: d2000000-d3ffffff [size=32M]
Prefetchable memory behind bridge: 00000000d6f00000-00000000d70fffff [size=2M]
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Capabilities: [90] Subsystem: Gigabyte Technology Co., Ltd NM10/ICH7 Family PCI Express Port 2
Capabilities: [a0] Power Management version 2
Capabilities: [100] Virtual Channel
Capabilities: [180] Root Complex Link
Kernel driver in use: pcieport
00:1c.2 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 3 (rev 01) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 18
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00001000-00001fff [size=4K]
Memory behind bridge: d6000000-d67fffff [size=8M]
Prefetchable memory behind bridge: 00000000d7100000-00000000d72fffff [size=2M]
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Capabilities: [90] Subsystem: Gigabyte Technology Co., Ltd NM10/ICH7 Family PCI Express Port 3
Capabilities: [a0] Power Management version 2
Capabilities: [100] Virtual Channel
Capabilities: [180] Root Complex Link
Kernel driver in use: pcieport
00:1c.3 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 4 (rev 01) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 19
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 00009000-00009fff [size=4K]
Memory behind bridge: d4000000-d5ffffff [size=32M]
Prefetchable memory behind bridge: 00000000d7300000-00000000d74fffff [size=2M]
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Capabilities: [90] Subsystem: Gigabyte Technology Co., Ltd NM10/ICH7 Family PCI Express Port 4
Capabilities: [a0] Power Management version 2
Capabilities: [100] Virtual Channel
Capabilities: [180] Root Complex Link
Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 01) (prog-if 00 [UHCI])
Subsystem: Gigabyte Technology Co., Ltd GA-D525TUD
Flags: bus master, medium devsel, latency 0, IRQ 23
I/O ports at bc00 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 01) (prog-if 00 [UHCI])
Subsystem: Gigabyte Technology Co., Ltd GA-D525TUD
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at b000 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 01) (prog-if 00 [UHCI])
Subsystem: Gigabyte Technology Co., Ltd GA-D525TUD
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at b400 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 01) (prog-if 00 [UHCI])
Subsystem: Gigabyte Technology Co., Ltd GA-D525TUD
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at b800 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI])
Subsystem: Gigabyte Technology Co., Ltd GA-D525TUD
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at d6a04000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) (prog-if 01 [Subtractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=06, subordinate=06, sec-latency=32
I/O behind bridge: 0000a000-0000afff [size=4K]
Memory behind bridge: d6800000-d68fffff [size=1M]
Prefetchable memory behind bridge: 00000000d6900000-00000000d69fffff [size=1M]
Capabilities: [50] Subsystem: Gigabyte Technology Co., Ltd Motherboard
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
Subsystem: Gigabyte Technology Co., Ltd 82801GB/GR (ICH7 Family) LPC Interface Bridge
Flags: bus master, medium devsel, latency 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
Kernel driver in use: lpc_ich
Kernel modules: intel_rng, lpc_ich, leds_ss4200
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) (prog-if 8a [ISA Compatibility mode controller, supports both channels switched to PCI native mode, supports bus mastering])
Subsystem: Gigabyte Technology Co., Ltd 82801G (ICH7 Family) IDE Controller
Flags: bus master, medium devsel, latency 0, IRQ 18
Memory at 000001f0 (32-bit, non-prefetchable) [virtual] [size=8]
Memory at 000003f0 (type 3, non-prefetchable) [virtual]
Memory at 00000170 (32-bit, non-prefetchable) [virtual] [size=8]
Memory at 00000370 (type 3, non-prefetchable) [virtual]
I/O ports at f000 [virtual] [size=16]
Kernel driver in use: ata_piix
Kernel modules: ata_piix, ata_generic
00:1f.2 IDE interface: Intel Corporation NM10/ICH7 Family SATA Controller [IDE mode] (rev 01) (prog-if 8f [PCI native mode controller, supports both channels switched to ISA compatibility mode, supports bus mastering])
Subsystem: Gigabyte Technology Co., Ltd NM10/ICH7 Family SATA Controller [IDE mode]
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 19
I/O ports at d000 [size=8]
I/O ports at d400 [size=4]
I/O ports at d800 [size=8]
I/O ports at dc00 [size=4]
I/O ports at e000 [size=16]
Capabilities: [70] Power Management version 2
Kernel driver in use: ata_piix
Kernel modules: ata_piix, ata_generic
00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 01)
Subsystem: Gigabyte Technology Co., Ltd GA-8I945PG-RH/GA-D525TUD Mainboard
Flags: medium devsel, IRQ 19
I/O ports at 0500 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Juniper XT [Radeon HD 5770] (prog-if 00 [VGA controller])
Subsystem: XFX Pine Group Inc. Juniper XT [Radeon HD 5770]
Flags: bus master, fast devsel, latency 0, IRQ 24
Memory at c0000000 (64-bit, prefetchable) [size=256M]
Memory at d1000000 (64-bit, non-prefetchable) [size=128K]
I/O ports at 7000 [size=256]
Expansion ROM at 000c0000 [virtual] [disabled] [size=128K]
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Legacy Endpoint, MSI 00
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [150] Advanced Error Reporting
Kernel driver in use: radeon
Kernel modules: radeon
01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Juniper HDMI Audio [Radeon HD 5700 Series]
Subsystem: XFX Pine Group Inc. Juniper HDMI Audio [Radeon HD 5700 Series]
Flags: bus master, fast devsel, latency 0, IRQ 26
Memory at d1020000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Legacy Endpoint, MSI 00
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [150] Advanced Error Reporting
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
03:00.0 Mass storage controller: Silicon Image, Inc. SiI 3132 Serial ATA Raid II Controller (rev 01)
Subsystem: Silicon Image, Inc. SiI 3132 Serial ATA Raid II Controller
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at d3004000 (64-bit, non-prefetchable) [size=128]
Memory at d3000000 (64-bit, non-prefetchable) [size=16K]
I/O ports at 8000 [size=128]
Expansion ROM at d2000000 [virtual] [disabled] [size=512K]
Capabilities: [54] Power Management version 2
Capabilities: [5c] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [70] Express Legacy Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Kernel driver in use: sata_sil24
Kernel modules: sata_sil24
04:00.0 Multimedia controller: Philips Semiconductors SAA7231 (rev aa)
Subsystem: Modular Technology Holdings Ltd SAA7231
Flags: bus master, fast devsel, latency 0, IRQ 3
Memory at d6000000 (64-bit, non-prefetchable) [size=4M]
Memory at d6400000 (64-bit, non-prefetchable) [size=4M]
Capabilities: [40] MSI: Enable- Count=1/16 Maskable- 64bit+
Capabilities: [50] Express Endpoint, MSI 00
Capabilities: [74] Power Management version 3
Capabilities: [7c] Vendor Specific Information: Len=84 <?>
Capabilities: [100] Vendor Specific Information: ID=0000 Rev=0 Len=094 <?>
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 01)
Subsystem: Gigabyte Technology Co., Ltd Onboard Ethernet
Flags: bus master, fast devsel, latency 0, IRQ 19
I/O ports at 9000 [size=256]
Memory at d5000000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at d4000000 [virtual] [disabled] [size=64K]
Capabilities: [40] Power Management version 2
Capabilities: [48] Vital Product Data
Capabilities: [50] MSI: Enable- Count=1/2 Maskable- 64bit+
Capabilities: [60] Express Endpoint, MSI 00
Capabilities: [84] Vendor Specific Information: Len=4c <?>
Capabilities: [100] Advanced Error Reporting
Capabilities: [12c] Virtual Channel
Capabilities: [148] Device Serial Number 25-00-00-00-10-ec-81-68
Capabilities: [154] Power Budgeting <?>
Kernel driver in use: r8169
Kernel modules: r8169
06:00.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
Subsystem: Hauppauge computer works Inc. WinTV Series
Flags: bus master, medium devsel, latency 32, IRQ 20
Memory at d6900000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2
Kernel driver in use: bttv
Kernel modules: bttv
06:00.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
Subsystem: Hauppauge computer works Inc. WinTV Series
Flags: bus master, medium devsel, latency 32, IRQ 20
Memory at d6901000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2
Kernel driver in use: snd_bt87x
Kernel modules: snd_bt87x
06:01.0 USB controller: VIA Technologies, Inc. VT82xx/62xx UHCI USB 1.1 Controller (rev 62) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xx/62xx UHCI USB 1.1 Controller
Flags: bus master, medium devsel, latency 32, IRQ 19
I/O ports at a000 [size=32]
Capabilities: [80] Power Management version 2
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
06:01.1 USB controller: VIA Technologies, Inc. VT82xx/62xx UHCI USB 1.1 Controller (rev 62) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xx/62xx UHCI USB 1.1 Controller
Flags: bus master, medium devsel, latency 32, IRQ 18
I/O ports at a400 [size=32]
Capabilities: [80] Power Management version 2
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
06:01.2 USB controller: VIA Technologies, Inc. USB 2.0 (rev 65) (prog-if 20 [EHCI])
Subsystem: VIA Technologies, Inc. USB 2.0 Controller
Flags: bus master, medium devsel, latency 32, IRQ 16
Memory at d6800000 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
06:02.0 USB controller: VIA Technologies, Inc. VT82xx/62xx UHCI USB 1.1 Controller (rev 62) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xx/62xx UHCI USB 1.1 Controller
Flags: bus master, medium devsel, latency 32, IRQ 18
I/O ports at a800 [size=32]
Capabilities: [80] Power Management version 2
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
06:02.1 USB controller: VIA Technologies, Inc. VT82xx/62xx UHCI USB 1.1 Controller (rev 62) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xx/62xx UHCI USB 1.1 Controller
Flags: bus master, medium devsel, latency 32, IRQ 16
I/O ports at ac00 [size=32]
Capabilities: [80] Power Management version 2
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
06:02.2 USB controller: VIA Technologies, Inc. USB 2.0 (rev 65) (prog-if 20 [EHCI])
Subsystem: VIA Technologies, Inc. USB 2.0 Controller
Flags: bus master, medium devsel, latency 32, IRQ 20
Memory at d6801000 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
Lots of devices here... the Intel devices are provided by the mainboard chipset along with the Ethernet controller. The AMD Radeon HD 5770 graphics card shows as "VGA" and "Audio" devices. The Silicon Image SATA RAID controller is from a PCIe card. The "Brooktree Corporation Bt878" and VIA USB controllers are from PCI TV capture cards, and the "Philips Semiconductors SAA7231" from a PCIe DVB capture card. The raw PCI bus devices list hints at the associated drivers:
$ cat /proc/bus/pci/devices 0000 80862770 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0008 80862771 10 0 0 0 0 0 0 0 0 0 0 0 0 0 0 pcieport 00d8 808627d8 19 d6a00004 0 0 0 0 0 0 4000 0 0 0 0 0 0 snd_hda_intel 00e0 808627d0 10 0 0 0 0 0 0 0 0 0 0 0 0 0 0 pcieport 00e1 808627d2 11 0 0 0 0 0 0 0 0 0 0 0 0 0 0 pcieport 00e2 808627d4 12 0 0 0 0 0 0 0 0 0 0 0 0 0 0 pcieport 00e3 808627d6 13 0 0 0 0 0 0 0 0 0 0 0 0 0 0 pcieport 00e8 808627c8 17 0 0 0 0 bc01 0 0 0 0 0 0 20 0 0 uhci_hcd 00e9 808627c9 13 0 0 0 0 b001 0 0 0 0 0 0 20 0 0 uhci_hcd 00ea 808627ca 12 0 0 0 0 b401 0 0 0 0 0 0 20 0 0 uhci_hcd 00eb 808627cb 10 0 0 0 0 b801 0 0 0 0 0 0 20 0 0 uhci_hcd 00ef 808627cc 17 d6a04000 0 0 0 0 0 0 400 0 0 0 0 0 0 ehci-pci 00f0 8086244e 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 00f8 808627b8 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 lpc_ich 00f9 808627df 12 1f0 3f6 170 376 f001 0 0 8 0 8 0 10 0 0 ata_piix 00fa 808627c0 13 d001 d401 d801 dc01 e001 0 0 8 4 8 4 10 0 0 ata_piix 00fb 808627da 13 0 0 0 0 501 0 0 0 0 0 0 20 0 0 i801_smbus 0100 100268b8 18 c000000c 0 d1000004 0 7001 0 c0002 10000000 0 20000 0 100 0 20000 radeon 0101 1002aa58 1a d1020004 0 0 0 0 0 0 4000 0 0 0 0 0 0 snd_hda_intel 0300 10953132 11 d3004004 0 d3000004 0 8001 0 d2000000 80 0 4000 0 80 0 80000 sata_sil24 0400 11317231 3 d6000004 0 d6400004 0 0 0 0 400000 0 400000 0 0 0 0 0500 10ec8168 13 9001 0 d5000004 0 0 0 d4000000 100 0 1000 0 0 0 10000 r8169 0600 109e036e 14 d6900008 0 0 0 0 0 0 1000 0 0 0 0 0 0 bttv 0601 109e0878 14 d6901008 0 0 0 0 0 0 1000 0 0 0 0 0 0 snd_bt87x 0608 11063038 13 0 0 0 0 a001 0 0 0 0 0 0 20 0 0 uhci_hcd 0609 11063038 12 0 0 0 0 a401 0 0 0 0 0 0 20 0 0 uhci_hcd 060a 11063104 10 d6800000 0 0 0 0 0 0 100 0 0 0 0 0 0 ehci-pci 0610 11063038 12 0 0 0 0 a801 0 0 0 0 0 0 20 0 0 uhci_hcd 0611 11063038 10 0 0 0 0 ac01 0 0 0 0 0 0 20 0 0 uhci_hcd 0612 11063104 14 d6801000 0 0 0 0 0 0 100 0 0 0 0 0 0 ehci-pci
For a more explicit connection between the cards and their drivers use lspci -v, although it has a lot more output.
lsusb
List USB devices:
$ lsusb Bus 005 Device 002: ID 2040:9950 Hauppauge WinTV Nova-T-500 Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 011 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 010 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 2040:9950 Hauppauge WinTV Nova-T-500 Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 0409:005a NEC Corp. HighSpeed Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
The device relationships are a little clearer using the tree output:
$ lsusb -v -t
/: Bus 11.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
ID 1d6b:0001 Linux Foundation 1.1 root hub
/: Bus 10.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
ID 1d6b:0001 Linux Foundation 1.1 root hub
/: Bus 09.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
ID 1d6b:0001 Linux Foundation 1.1 root hub
/: Bus 08.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
ID 1d6b:0001 Linux Foundation 1.1 root hub
/: Bus 07.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
ID 1d6b:0001 Linux Foundation 1.1 root hub
/: Bus 06.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
ID 1d6b:0001 Linux Foundation 1.1 root hub
/: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/4p, 480M
ID 1d6b:0002 Linux Foundation 2.0 root hub
|__ Port 1: Dev 2, If 0, Class=Vendor Specific Class, Driver=dvb_usb_dib0700, 480M
ID 2040:9950 Hauppauge WinTV Nova-T-500
/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
ID 1d6b:0001 Linux Foundation 1.1 root hub
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/4p, 480M
ID 1d6b:0002 Linux Foundation 2.0 root hub
|__ Port 1: Dev 2, If 0, Class=Vendor Specific Class, Driver=dvb_usb_dib0700, 480M
ID 2040:9950 Hauppauge WinTV Nova-T-500
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
ID 1d6b:0001 Linux Foundation 1.1 root hub
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/8p, 480M
ID 1d6b:0002 Linux Foundation 2.0 root hub
|__ Port 3: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
ID 0409:005a NEC Corp. HighSpeed Hub
We have the USB controller root hubs for the Intel chipset and for the two WinTV Nova-T-500 PCI cards. The WinTV Nova-T-500 USB devices, and an additional USB hub.
lshw
A hardware report can be obtained using lshw from the "lshw" package (not installed by default):
$ sudo lshw
description: Desktop Computer
product: 945PL-S3P
vendor: Gigabyte Technology Co., Ltd.
width: 64 bits
capabilities: smbios-2.4 dmi-2.4 smp vsyscall32
configuration: boot=normal chassis=desktop uuid=00000000-0000-0000-0000-001D7DC77651
*-core
description: Motherboard
product: 945PL-S3P
vendor: Gigabyte Technology Co., Ltd.
physical id: 0
version: x.x
*-firmware
description: BIOS
vendor: Award Software International, Inc.
physical id: 0
version: F4
date: 12/07/2007
size: 128KiB
capacity: 512KiB
capabilities: pci pnp apm upgrade shadowing cdboot bootselect edd int13floppy360 int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot zipboot biosbootspecification
*-cpu
description: CPU
product: Intel(R) Pentium(R) Dual CPU E2180 @ 2.00GHz
vendor: Intel Corp.
physical id: 4
bus info: cpu@0
version: Intel(R) Pentium(R) Dual CP
slot: Socket 775
size: 1205MHz
capacity: 4GHz
width: 64 bits
clock: 200MHz
capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ht tm pbe syscall nx x86-64 constant_tsc arch_perfmon pebs bts rep_good nopl cpuid aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm lahf_lm pti dtherm cpufreq
*-cache:0
description: L1 cache
physical id: a
slot: Internal Cache
size: 64KiB
capacity: 64KiB
capabilities: synchronous internal write-back
configuration: level=1
*-cache:1
description: L2 cache
physical id: b
slot: External Cache
size: 1MiB
capacity: 1MiB
capabilities: synchronous internal write-back
configuration: level=2
*-memory
description: System Memory
physical id: 1b
slot: System board or motherboard
size: 4GiB
*-bank:0
description: DIMM 667 MHz (1.5 ns)
product: None
vendor: None
physical id: 0
serial: None
slot: A0
size: 2GiB
width: 64 bits
clock: 667MHz (1.5ns)
*-bank:1
description: DIMM [empty]
product: None
vendor: None
physical id: 1
serial: None
slot: A1
*-bank:2
description: DIMM 667 MHz (1.5 ns)
product: None
vendor: None
physical id: 2
serial: None
slot: A2
size: 2GiB
width: 64 bits
clock: 667MHz (1.5ns)
*-bank:3
description: DIMM [empty]
product: None
vendor: None
physical id: 3
serial: None
slot: A3
*-pci
description: Host bridge
product: 82945G/GZ/P/PL Memory Controller Hub
vendor: Intel Corporation
physical id: 100
bus info: pci@0000:00:00.0
version: 02
width: 32 bits
clock: 33MHz
*-pci:0
description: PCI bridge
product: 82945G/GZ/P/PL PCI Express Root Port
vendor: Intel Corporation
physical id: 1
bus info: pci@0000:00:01.0
version: 02
width: 32 bits
clock: 33MHz
capabilities: pci pm msi pciexpress normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:16 ioport:7000(size=4096) memory:d0000000-d1ffffff ioport:c0000000(size=268435456)
*-display
description: VGA compatible controller
product: Juniper XT [Radeon HD 5770]
vendor: Advanced Micro Devices, Inc. [AMD/ATI]
physical id: 0
bus info: pci@0000:01:00.0
version: 00
width: 64 bits
clock: 33MHz
capabilities: pm pciexpress msi vga_controller bus_master cap_list rom
configuration: driver=radeon latency=0
resources: irq:24 memory:c0000000-cfffffff memory:d1000000-d101ffff ioport:7000(size=256) memory:c0000-dffff
*-multimedia
description: Audio device
product: Juniper HDMI Audio [Radeon HD 5700 Series]
vendor: Advanced Micro Devices, Inc. [AMD/ATI]
physical id: 0.1
bus info: pci@0000:01:00.1
version: 00
width: 64 bits
clock: 33MHz
capabilities: pm pciexpress msi bus_master cap_list
configuration: driver=snd_hda_intel latency=0
resources: irq:26 memory:d1020000-d1023fff
*-multimedia
description: Audio device
product: NM10/ICH7 Family High Definition Audio Controller
vendor: Intel Corporation
physical id: 1b
bus info: pci@0000:00:1b.0
version: 01
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list
configuration: driver=snd_hda_intel latency=0
resources: irq:25 memory:d6a00000-d6a03fff
*-pci:1
description: PCI bridge
product: NM10/ICH7 Family PCI Express Port 1
vendor: Intel Corporation
physical id: 1c
bus info: pci@0000:00:1c.0
version: 01
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:16 ioport:6000(size=4096) memory:d6b00000-d6cfffff ioport:d6d00000(size=2097152)
*-pci:2
description: PCI bridge
product: NM10/ICH7 Family PCI Express Port 2
vendor: Intel Corporation
physical id: 1c.1
bus info: pci@0000:00:1c.1
version: 01
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:17 ioport:8000(size=4096) memory:d2000000-d3ffffff ioport:d6f00000(size=2097152)
*-storage
description: Mass storage controller
product: SiI 3132 Serial ATA Raid II Controller
vendor: Silicon Image, Inc.
physical id: 0
bus info: pci@0000:03:00.0
version: 01
width: 64 bits
clock: 33MHz
capabilities: storage pm msi pciexpress bus_master cap_list rom
configuration: driver=sata_sil24 latency=0
resources: irq:17 memory:d3004000-d300407f memory:d3000000-d3003fff ioport:8000(size=128) memory:d2000000-d207ffff
*-pci:3
description: PCI bridge
product: NM10/ICH7 Family PCI Express Port 3
vendor: Intel Corporation
physical id: 1c.2
bus info: pci@0000:00:1c.2
version: 01
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:18 ioport:1000(size=4096) memory:d6000000-d67fffff ioport:d7100000(size=2097152)
*-multimedia UNCLAIMED
description: Multimedia controller
product: SAA7231
vendor: Philips Semiconductors
physical id: 0
bus info: pci@0000:04:00.0
version: aa
width: 64 bits
clock: 33MHz
capabilities: msi pciexpress pm bus_master cap_list
configuration: latency=0
resources: memory:d6000000-d63fffff memory:d6400000-d67fffff
*-pci:4
description: PCI bridge
product: NM10/ICH7 Family PCI Express Port 4
vendor: Intel Corporation
physical id: 1c.3
bus info: pci@0000:00:1c.3
version: 01
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:19 ioport:9000(size=4096) memory:d4000000-d5ffffff ioport:d7300000(size=2097152)
*-network
description: Ethernet interface
product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:05:00.0
logical name: enp5s0
version: 01
serial: 00:1d:7d:c7:76:51
size: 100Mbit/s
capacity: 1Gbit/s
width: 64 bits
clock: 33MHz
capabilities: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=5.10.0-22-amd64 duplex=full ip=192.168.1.216 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s
resources: irq:19 ioport:9000(size=256) memory:d5000000-d5000fff memory:d4000000-d400ffff
*-usb:0
description: USB controller
product: NM10/ICH7 Family USB UHCI Controller #1
vendor: Intel Corporation
physical id: 1d
bus info: pci@0000:00:1d.0
version: 01
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master
configuration: driver=uhci_hcd latency=0
resources: irq:23 ioport:bc00(size=32)
*-usbhost
product: UHCI Host Controller
vendor: Linux 5.10.0-22-amd64 uhci_hcd
physical id: 1
bus info: usb@2
logical name: usb2
version: 5.10
capabilities: usb-1.10
configuration: driver=hub slots=2 speed=12Mbit/s
*-usb:1
description: USB controller
product: NM10/ICH7 Family USB UHCI Controller #2
vendor: Intel Corporation
physical id: 1d.1
bus info: pci@0000:00:1d.1
version: 01
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master
configuration: driver=uhci_hcd latency=0
resources: irq:19 ioport:b000(size=32)
*-usbhost
product: UHCI Host Controller
vendor: Linux 5.10.0-22-amd64 uhci_hcd
physical id: 1
bus info: usb@4
logical name: usb4
version: 5.10
capabilities: usb-1.10
configuration: driver=hub slots=2 speed=12Mbit/s
*-usb:2
description: USB controller
product: NM10/ICH7 Family USB UHCI Controller #3
vendor: Intel Corporation
physical id: 1d.2
bus info: pci@0000:00:1d.2
version: 01
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master
configuration: driver=uhci_hcd latency=0
resources: irq:18 ioport:b400(size=32)
*-usbhost
product: UHCI Host Controller
vendor: Linux 5.10.0-22-amd64 uhci_hcd
physical id: 1
bus info: usb@6
logical name: usb6
version: 5.10
capabilities: usb-1.10
configuration: driver=hub slots=2 speed=12Mbit/s
*-usb:3
description: USB controller
product: NM10/ICH7 Family USB UHCI Controller #4
vendor: Intel Corporation
physical id: 1d.3
bus info: pci@0000:00:1d.3
version: 01
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master
configuration: driver=uhci_hcd latency=0
resources: irq:16 ioport:b800(size=32)
*-usbhost
product: UHCI Host Controller
vendor: Linux 5.10.0-22-amd64 uhci_hcd
physical id: 1
bus info: usb@7
logical name: usb7
version: 5.10
capabilities: usb-1.10
configuration: driver=hub slots=2 speed=12Mbit/s
*-usb:4
description: USB controller
product: NM10/ICH7 Family USB2 EHCI Controller
vendor: Intel Corporation
physical id: 1d.7
bus info: pci@0000:00:1d.7
version: 01
width: 32 bits
clock: 33MHz
capabilities: pm ehci bus_master cap_list
configuration: driver=ehci-pci latency=0
resources: irq:23 memory:d6a04000-d6a043ff
*-usbhost
product: EHCI Host Controller
vendor: Linux 5.10.0-22-amd64 ehci_hcd
physical id: 1
bus info: usb@1
logical name: usb1
version: 5.10
capabilities: usb-2.00
configuration: driver=hub slots=8 speed=480Mbit/s
*-usb
description: USB hub
product: HighSpeed Hub
vendor: NEC Corp.
physical id: 3
bus info: usb@1:3
version: 1.00
capabilities: usb-2.00
configuration: driver=hub maxpower=100mA slots=4 speed=480Mbit/s
*-pci:5
description: PCI bridge
product: 82801 PCI Bridge
vendor: Intel Corporation
physical id: 1e
bus info: pci@0000:00:1e.0
version: e1
width: 32 bits
clock: 33MHz
capabilities: pci subtractive_decode bus_master cap_list
resources: ioport:a000(size=4096) memory:d6800000-d68fffff ioport:d6900000(size=1048576)
*-multimedia:0
description: Multimedia video controller
product: Bt878 Video Capture
vendor: Brooktree Corporation
physical id: 0
bus info: pci@0000:06:00.0
version: 11
width: 32 bits
clock: 33MHz
capabilities: vpd pm bus_master cap_list
configuration: driver=bttv latency=32 maxlatency=40 mingnt=16
resources: irq:20 memory:d6900000-d6900fff
*-multimedia:1
description: Multimedia controller
product: Bt878 Audio Capture
vendor: Brooktree Corporation
physical id: 0.1
bus info: pci@0000:06:00.1
version: 11
width: 32 bits
clock: 33MHz
capabilities: vpd pm bus_master cap_list
configuration: driver=snd_bt87x latency=32 maxlatency=255 mingnt=4
resources: irq:20 memory:d6901000-d6901fff
*-usb:0
description: USB controller
product: VT82xx/62xx UHCI USB 1.1 Controller
vendor: VIA Technologies, Inc.
physical id: 1
bus info: pci@0000:06:01.0
version: 62
width: 32 bits
clock: 33MHz
capabilities: pm uhci bus_master cap_list
configuration: driver=uhci_hcd latency=32
resources: irq:19 ioport:a000(size=32)
*-usbhost
product: UHCI Host Controller
vendor: Linux 5.10.0-22-amd64 uhci_hcd
physical id: 1
bus info: usb@8
logical name: usb8
version: 5.10
capabilities: usb-1.10
configuration: driver=hub slots=2 speed=12Mbit/s
*-usb:1
description: USB controller
product: VT82xx/62xx UHCI USB 1.1 Controller
vendor: VIA Technologies, Inc.
physical id: 1.1
bus info: pci@0000:06:01.1
version: 62
width: 32 bits
clock: 33MHz
capabilities: pm uhci bus_master cap_list
configuration: driver=uhci_hcd latency=32
resources: irq:18 ioport:a400(size=32)
*-usbhost
product: UHCI Host Controller
vendor: Linux 5.10.0-22-amd64 uhci_hcd
physical id: 1
bus info: usb@9
logical name: usb9
version: 5.10
capabilities: usb-1.10
configuration: driver=hub slots=2 speed=12Mbit/s
*-usb:2
description: USB controller
product: USB 2.0
vendor: VIA Technologies, Inc.
physical id: 1.2
bus info: pci@0000:06:01.2
version: 65
width: 32 bits
clock: 33MHz
capabilities: pm ehci bus_master cap_list
configuration: driver=ehci-pci latency=32
resources: irq:16 memory:d6800000-d68000ff
*-usbhost
product: EHCI Host Controller
vendor: Linux 5.10.0-22-amd64 ehci_hcd
physical id: 1
bus info: usb@3
logical name: usb3
version: 5.10
capabilities: usb-2.00
configuration: driver=hub slots=4 speed=480Mbit/s
*-usb
description: Generic USB device
product: WinTV Nova-DT
vendor: Hauppauge
physical id: 1
bus info: usb@3:1
version: 1.00
serial: 4028917118
capabilities: usb-2.00
configuration: driver=dvb_usb_dib0700 maxpower=500mA speed=480Mbit/s
*-usb:3
description: USB controller
product: VT82xx/62xx UHCI USB 1.1 Controller
vendor: VIA Technologies, Inc.
physical id: 2
bus info: pci@0000:06:02.0
version: 62
width: 32 bits
clock: 33MHz
capabilities: pm uhci bus_master cap_list
configuration: driver=uhci_hcd latency=32
resources: irq:18 ioport:a800(size=32)
*-usbhost
product: UHCI Host Controller
vendor: Linux 5.10.0-22-amd64 uhci_hcd
physical id: 1
bus info: usb@10
logical name: usb10
version: 5.10
capabilities: usb-1.10
configuration: driver=hub slots=2 speed=12Mbit/s
*-usb:4
description: USB controller
product: VT82xx/62xx UHCI USB 1.1 Controller
vendor: VIA Technologies, Inc.
physical id: 2.1
bus info: pci@0000:06:02.1
version: 62
width: 32 bits
clock: 33MHz
capabilities: pm uhci bus_master cap_list
configuration: driver=uhci_hcd latency=32
resources: irq:16 ioport:ac00(size=32)
*-usbhost
product: UHCI Host Controller
vendor: Linux 5.10.0-22-amd64 uhci_hcd
physical id: 1
bus info: usb@11
logical name: usb11
version: 5.10
capabilities: usb-1.10
configuration: driver=hub slots=2 speed=12Mbit/s
*-usb:5
description: USB controller
product: USB 2.0
vendor: VIA Technologies, Inc.
physical id: 2.2
bus info: pci@0000:06:02.2
version: 65
width: 32 bits
clock: 33MHz
capabilities: pm ehci bus_master cap_list
configuration: driver=ehci-pci latency=32
resources: irq:20 memory:d6801000-d68010ff
*-usbhost
product: EHCI Host Controller
vendor: Linux 5.10.0-22-amd64 ehci_hcd
physical id: 1
bus info: usb@5
logical name: usb5
version: 5.10
capabilities: usb-2.00
configuration: driver=hub slots=4 speed=480Mbit/s
*-usb
description: Generic USB device
product: WinTV Nova-DT
vendor: Hauppauge
physical id: 1
bus info: usb@5:1
version: 1.00
serial: 4028916467
capabilities: usb-2.00
configuration: driver=dvb_usb_dib0700 maxpower=500mA speed=480Mbit/s
*-isa
description: ISA bridge
product: 82801GB/GR (ICH7 Family) LPC Interface Bridge
vendor: Intel Corporation
physical id: 1f
bus info: pci@0000:00:1f.0
version: 01
width: 32 bits
clock: 33MHz
capabilities: isa bus_master cap_list
configuration: driver=lpc_ich latency=0
resources: irq:0
*-ide:0
description: IDE interface
product: 82801G (ICH7 Family) IDE Controller
vendor: Intel Corporation
physical id: 1f.1
bus info: pci@0000:00:1f.1
logical name: scsi1
version: 01
width: 32 bits
clock: 33MHz
capabilities: ide isa_compat_mode pci_native_mode bus_master emulated
configuration: driver=ata_piix latency=0
resources: irq:18 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8) ioport:376 ioport:f000(size=16)
*-cdrom
description: DVD reader
product: DVD-ROM SH-D162D
vendor: TSSTcorp
physical id: 0.0.0
bus info: scsi@1:0.0.0
logical name: /dev/cdrom
logical name: /dev/dvd
logical name: /dev/sr0
version: SB03
capabilities: removable audio dvd
configuration: ansiversion=5 status=nodisc
*-disk
description: ATA Disk
product: Maxtor 6Y120P0
vendor: Maxtor
physical id: 0.1.0
bus info: scsi@1:0.1.0
logical name: /dev/sda
version: 1BW0
serial: Y3PNF4PE
size: 114GiB (122GB)
capabilities: partitioned partitioned:dos
configuration: ansiversion=5 logicalsectorsize=512 sectorsize=512 signature=00063ac7
*-volume
description: HPFS/NTFS partition
physical id: 1
bus info: scsi@1:0.1.0,1
logical name: /dev/sda1
capacity: 114GiB
capabilities: primary
*-ide:1
description: IDE interface
product: NM10/ICH7 Family SATA Controller [IDE mode]
vendor: Intel Corporation
physical id: 1f.2
bus info: pci@0000:00:1f.2
logical name: scsi4
logical name: scsi5
version: 01
width: 32 bits
clock: 66MHz
capabilities: ide pm isa_compat_mode pci_native_mode bus_master cap_list emulated
configuration: driver=ata_piix latency=0
resources: irq:19 ioport:d000(size=8) ioport:d400(size=4) ioport:d800(size=8) ioport:dc00(size=4) ioport:e000(size=16)
*-disk:0
description: ATA Disk
product: Hitachi HDP72502
vendor: Hitachi
physical id: 0
bus info: scsi@4:0.0.0
logical name: /dev/sdb
version: A52A
serial: GEK230RBR5MG0A
size: 232GiB (250GB)
capabilities: partitioned partitioned:dos
configuration: ansiversion=5 logicalsectorsize=512 sectorsize=512 signature=a4bf0c74
*-volume:0
description: Linux filesystem partition
vendor: Linux
physical id: 1
bus info: scsi@4:0.0.0,1
logical name: /dev/sdb1
version: 1.0
serial: 57360c9d-d893-44c1-82e6-10cc02b5a71c
size: 487MiB
capacity: 487MiB
capabilities: primary bootable extended_attributes large_files ext2 initialized
configuration: filesystem=ext2 lastmountpoint=/boot modified=2022-09-23 15:44:04 mounted=2022-09-23 15:44:04 state=unknown
*-volume:1
description: Extended partition
physical id: 2
bus info: scsi@4:0.0.0,2
logical name: /dev/sdb2
size: 232GiB
capacity: 232GiB
capabilities: primary extended partitioned partitioned:extended
*-logicalvolume
description: Linux LVM Physical Volume partition
physical id: 5
logical name: /dev/sdb5
serial: 21vWUU-NGkt-uIkk-RNTe-fSeP-koyp-073EJz
size: 232GiB
capacity: 232GiB
capabilities: multi lvm2
*-disk:1
description: ATA Disk
product: Hitachi HDP72502
vendor: Hitachi
physical id: 0.1.0
bus info: scsi@4:0.1.0
logical name: /dev/sdc
version: A52A
serial: GEK230RBR5RDYA
size: 232GiB (250GB)
capabilities: partitioned partitioned:dos
configuration: ansiversion=5 logicalsectorsize=512 sectorsize=512 signature=ae684f2c
*-volume
description: Linux LVM Physical Volume partition
physical id: 1
bus info: scsi@4:0.1.0,1
logical name: /dev/sdc1
serial: ldr0Gc-ruKD-1oUx-Zage-38j7-ZN0a-TIhQ9a
size: 232GiB
capacity: 232GiB
capabilities: primary multi lvm2
*-disk:2
description: ATA Disk
product: STM3500418AS
physical id: 1
bus info: scsi@5:0.0.0
logical name: /dev/sdd
version: CC3D
serial: 9VM38036
size: 465GiB (500GB)
capabilities: partitioned partitioned:dos
configuration: ansiversion=5 logicalsectorsize=512 sectorsize=512 signature=9944dff8
*-volume:0
description: Windows NTFS volume
physical id: 1
bus info: scsi@5:0.0.0,1
logical name: /dev/sdd1
version: 3.1
serial: ea48-2294
size: 48MiB
capacity: 50MiB
capabilities: primary bootable ntfs initialized
configuration: clustersize=4096 created=2023-05-04 13:23:49 filesystem=ntfs label=System Reserved state=clean
*-volume:1
description: Windows NTFS volume
physical id: 2
bus info: scsi@5:0.0.0,2
logical name: /dev/sdd2
version: 3.1
serial: b62bd7b3-e84b-0249-80f1-141f312f6d44
size: 465GiB
capacity: 465GiB
capabilities: primary ntfs initialized
configuration: clustersize=4096 created=2023-05-04 13:23:52 filesystem=ntfs state=clean
*-volume:2
description: Windows NTFS volume
physical id: 3
bus info: scsi@5:0.0.0,3
logical name: /dev/sdd3
version: 3.1
serial: 5a91-683b
size: 513MiB
capacity: 517MiB
capabilities: primary ntfs initialized
configuration: clustersize=4096 created=2023-05-04 12:42:55 filesystem=ntfs state=clean
*-serial
description: SMBus
product: NM10/ICH7 Family SMBus Controller
vendor: Intel Corporation
physical id: 1f.3
bus info: pci@0000:00:1f.3
version: 01
width: 32 bits
clock: 33MHz
configuration: driver=i801_smbus latency=0
resources: irq:19 ioport:500(size=32)
*-pnp00:00
product: PnP device PNP0c02
physical id: 1
capabilities: pnp
configuration: driver=system
*-pnp00:01
product: PnP device PNP0b00
physical id: 2
capabilities: pnp
configuration: driver=rtc_cmos
*-pnp00:02
product: PnP device PNP0700
physical id: 3
capabilities: pnp
*-pnp00:03
product: PnP device PNP0501
physical id: 5
capabilities: pnp
configuration: driver=serial
*-pnp00:04
product: PnP device PNP0400
physical id: 6
capabilities: pnp
configuration: driver=parport_pc
*-pnp00:05
product: PnP device PNP0303
physical id: 7
capabilities: pnp
configuration: driver=i8042 kbd
*-pnp00:06
product: PnP device PNP0c02
physical id: 8
capabilities: pnp
configuration: driver=system
*-pnp00:07
product: PnP device PNP0c02
physical id: 9
capabilities: pnp
configuration: driver=system
*-pnp00:08
product: PnP device PNP0c01
physical id: a
capabilities: pnp
configuration: driver=system
Lots of detail here about the various components present in the system presented in a tree describing the relationships.
dmesg
System message log:
$ sudo dmesg | cat [ 0.000000] microcode: microcode updated early to revision 0xa4, date = 2010-10-02 [ 0.000000] Linux version 5.10.0-22-amd64 (debian-kernel@lists.debian.org) (gcc-10 (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Debian 5.10.178-3 (2023-04-22) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.10.0-22-amd64 root=/dev/mapper/sorbus--vg-root ro quiet [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bffeffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bfff0000-0x00000000bfff2fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bfff3000-0x00000000bfffffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. 945PL-S3P/945PL-S3P, BIOS F4 12/07/2007 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2009.658 MHz processor [ 0.001673] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.001679] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.001687] last_pfn = 0xbfff0 max_arch_pfn = 0x400000000 [ 0.001695] MTRR default type: uncachable [ 0.001696] MTRR fixed ranges enabled: [ 0.001699] 00000-9FFFF write-back [ 0.001701] A0000-BFFFF uncachable [ 0.001702] C0000-CEFFF write-protect [ 0.001704] CF000-EFFFF uncachable [ 0.001706] F0000-FFFFF write-through [ 0.001708] MTRR variable ranges enabled: [ 0.001710] 0 base 000000000 mask F80000000 write-back [ 0.001712] 1 base 080000000 mask FC0000000 write-back [ 0.001714] 2 disabled [ 0.001715] 3 disabled [ 0.001716] 4 disabled [ 0.001718] 5 disabled [ 0.001719] 6 disabled [ 0.001720] 7 disabled [ 0.002231] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.010117] found SMP MP-table at [mem 0x000f4b00-0x000f4b0f] [ 0.022792] RAMDISK: [mem 0x2f3c5000-0x339d9fff] [ 0.022801] ACPI: Early table checksum verification disabled [ 0.022807] ACPI: RSDP 0x00000000000F6440 000014 (v00 GBT ) [ 0.022814] ACPI: RSDT 0x00000000BFFF3040 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.022823] ACPI: FACP 0x00000000BFFF30C0 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.022832] ACPI: DSDT 0x00000000BFFF3180 003881 (v01 GBT GBTUACPI 00001000 MSFT 0100000C) [ 0.022839] ACPI: FACS 0x00000000BFFF0000 000040 [ 0.022844] ACPI: HPET 0x00000000BFFF6B40 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.022851] ACPI: MCFG 0x00000000BFFF6BC0 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.022857] ACPI: APIC 0x00000000BFFF6A80 000068 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.022863] ACPI: SSDT 0x00000000BFFF6C40 00019E (v01 PmRef Cpu0Ist 00003000 INTL 20040311) [ 0.022870] ACPI: SSDT 0x00000000BFFF70D0 000167 (v01 PmRef CpuPm 00003000 INTL 20040311) [ 0.022875] ACPI: Reserving FACP table memory at [mem 0xbfff30c0-0xbfff3133] [ 0.022877] ACPI: Reserving DSDT table memory at [mem 0xbfff3180-0xbfff6a00] [ 0.022879] ACPI: Reserving FACS table memory at [mem 0xbfff0000-0xbfff003f] [ 0.022881] ACPI: Reserving HPET table memory at [mem 0xbfff6b40-0xbfff6b77] [ 0.022883] ACPI: Reserving MCFG table memory at [mem 0xbfff6bc0-0xbfff6bfb] [ 0.022884] ACPI: Reserving APIC table memory at [mem 0xbfff6a80-0xbfff6ae7] [ 0.022886] ACPI: Reserving SSDT table memory at [mem 0xbfff6c40-0xbfff6ddd] [ 0.022888] ACPI: Reserving SSDT table memory at [mem 0xbfff70d0-0xbfff7236] [ 0.022905] ACPI: Local APIC address 0xfee00000 [ 0.022979] No NUMA configuration found [ 0.022981] Faking a node at [mem 0x0000000000000000-0x00000000bffeffff] [ 0.022998] NODE_DATA(0) allocated [mem 0xbffc6000-0xbffeffff] [ 0.023903] Zone ranges: [ 0.023905] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.023908] DMA32 [mem 0x0000000001000000-0x00000000bffeffff] [ 0.023911] Normal empty [ 0.023913] Device empty [ 0.023915] Movable zone start for each node [ 0.023920] Early memory node ranges [ 0.023922] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.023924] node 0: [mem 0x0000000000100000-0x00000000bffeffff] [ 0.023928] Initmem setup node 0 [mem 0x0000000000001000-0x00000000bffeffff] [ 0.023930] On node 0 totalpages: 786318 [ 0.023932] DMA zone: 64 pages used for memmap [ 0.023933] DMA zone: 21 pages reserved [ 0.023935] DMA zone: 3998 pages, LIFO batch:0 [ 0.023937] DMA32 zone: 12224 pages used for memmap [ 0.023939] DMA32 zone: 782320 pages, LIFO batch:63 [ 0.023946] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.024025] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.026313] On node 0, zone DMA32: 16 pages in unavailable ranges [ 0.026595] ACPI: PM-Timer IO Port: 0x408 [ 0.026600] ACPI: Local APIC address 0xfee00000 [ 0.026612] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.026614] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.026628] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.026631] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.026635] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.026637] ACPI: IRQ0 used by override. [ 0.026640] ACPI: IRQ9 used by override. [ 0.026643] Using ACPI (MADT) for SMP configuration information [ 0.026646] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.026655] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.026677] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.026680] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.026681] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.026683] PM: hibernation: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.026686] [mem 0xc0000000-0xefffffff] available for PCI devices [ 0.026688] Booting paravirtualized kernel on bare hardware [ 0.026694] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.034140] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.035114] percpu: Embedded 63 pages/cpu s221184 r8192 d28672 u1048576 [ 0.035124] pcpu-alloc: s221184 r8192 d28672 u1048576 alloc=1*2097152 [ 0.035127] pcpu-alloc: [0] 0 1 [ 0.035178] Built 1 zonelists, mobility grouping on. Total pages: 774009 [ 0.035181] Policy zone: DMA32 [ 0.035184] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.10.0-22-amd64 root=/dev/mapper/sorbus--vg-root ro quiet [ 0.036822] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.037645] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.037711] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.045683] Memory: 261408K/3145272K available (12295K kernel code, 2536K rwdata, 7568K rodata, 2668K init, 17720K bss, 177092K reserved, 0K cma-reserved) [ 0.046135] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.046170] Kernel/User page tables isolation: enabled [ 0.046209] ftrace: allocating 36572 entries in 143 pages [ 0.072711] ftrace: allocated 143 pages with 5 groups [ 0.073028] rcu: Hierarchical RCU implementation. [ 0.073032] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=2. [ 0.073034] Rude variant of Tasks RCU enabled. [ 0.073035] Tracing variant of Tasks RCU enabled. [ 0.073037] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.073039] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.080620] NR_IRQS: 524544, nr_irqs: 440, preallocated irqs: 16 [ 0.082573] Console: colour VGA+ 80x25 [ 0.082592] printk: console [tty0] enabled [ 0.082631] ACPI: Core revision 20200925 [ 0.082736] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.082753] APIC: Switch to symmetric I/O mode setup [ 0.083146] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.102753] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1cf7d1c5890, max_idle_ns: 440795238470 ns [ 0.102761] Calibrating delay loop (skipped), value calculated using timer frequency.. 4019.31 BogoMIPS (lpj=8038632) [ 0.102765] pid_max: default: 32768 minimum: 301 [ 0.102867] LSM: Security Framework initializing [ 0.102888] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.102967] AppArmor: AppArmor initialized [ 0.102970] TOMOYO Linux initialized [ 0.103043] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.103070] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.103596] mce: CPU0: Thermal monitoring enabled (TM2) [ 0.103602] process: using mwait in idle threads [ 0.103608] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 [ 0.103610] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 [ 0.103616] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.103618] Spectre V2 : Mitigation: Retpolines [ 0.103619] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.103621] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.103623] Speculative Store Bypass: Vulnerable [ 0.103626] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.103628] MMIO Stale Data: Unknown: No mitigations [ 0.120268] Freeing SMP alternatives memory: 32K [ 0.236755] smpboot: CPU0: Intel(R) Pentium(R) Dual CPU E2180 @ 2.00GHz (family: 0x6, model: 0xf, stepping: 0xd) [ 0.237066] Performance Events: PEBS fmt0+, Core2 events, 4-deep LBR, Intel PMU driver. [ 0.237077] core: PEBS disabled due to CPU errata [ 0.237080] ... version: 2 [ 0.237082] ... bit width: 40 [ 0.237083] ... generic registers: 2 [ 0.237085] ... value mask: 000000ffffffffff [ 0.237086] ... max period: 000000007fffffff [ 0.237087] ... fixed-purpose events: 3 [ 0.237088] ... event mask: 0000000700000003 [ 0.237283] rcu: Hierarchical SRCU implementation. [ 0.238012] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.238135] smp: Bringing up secondary CPUs ... [ 0.238360] x86: Booting SMP configuration: [ 0.238363] .... node #0, CPUs: #1 [ 0.241149] smp: Brought up 1 node, 2 CPUs [ 0.241149] smpboot: Max logical packages: 1 [ 0.241149] smpboot: Total of 2 processors activated (8038.63 BogoMIPS) [ 0.264287] node 0 deferred pages initialised in 24ms [ 0.264287] devtmpfs: initialized [ 0.264287] x86/mm: Memory block size: 128MB [ 0.264287] PM: Registering ACPI NVS region [mem 0xbfff0000-0xbfff2fff] (12288 bytes) [ 0.264287] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.264287] futex hash table entries: 512 (order: 3, 32768 bytes, linear) [ 0.264287] pinctrl core: initialized pinctrl subsystem [ 0.264287] NET: Registered protocol family 16 [ 0.264287] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations [ 0.264287] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.264287] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.264287] audit: initializing netlink subsys (disabled) [ 0.266856] audit: type=2000 audit(1683230105.184:1): state=initialized audit_enabled=0 res=1 [ 0.267041] thermal_sys: Registered thermal governor 'fair_share' [ 0.267043] thermal_sys: Registered thermal governor 'bang_bang' [ 0.267045] thermal_sys: Registered thermal governor 'step_wise' [ 0.267046] thermal_sys: Registered thermal governor 'user_space' [ 0.267048] thermal_sys: Registered thermal governor 'power_allocator' [ 0.267080] cpuidle: using governor ladder [ 0.267086] cpuidle: using governor menu [ 0.267151] ACPI: bus type PCI registered [ 0.267155] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.267312] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.267317] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 [ 0.267337] PCI: Using configuration type 1 for base access [ 0.267559] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.267561] mtrr: probably your BIOS does not setup all CPUs. [ 0.267562] mtrr: corrected configuration. [ 0.269117] Kprobes globally optimized [ 0.269129] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.566930] ACPI: Added _OSI(Module Device) [ 0.566930] ACPI: Added _OSI(Processor Device) [ 0.566930] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.566931] ACPI: Added _OSI(Processor Aggregator Device) [ 0.566932] ACPI: Added _OSI(Linux-Dell-Video) [ 0.566934] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.566936] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.567284] ACPI: 3 ACPI AML tables successfully acquired and loaded [ 0.569224] ACPI: Dynamic OEM Table Load: [ 0.569232] ACPI: SSDT 0xFFFF9C78012D8540 000087 (v01 PmRef Cpu1Ist 00003000 INTL 20040311) [ 0.569675] ACPI: Interpreter enabled [ 0.569699] ACPI: (supports S0 S1 S4 S5) [ 0.569701] ACPI: Using IOAPIC for interrupt routing [ 0.569732] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.569899] ACPI: Enabled 8 GPEs in block 00 to 1F [ 0.575227] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f]) [ 0.575236] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.575504] PCI host bridge to bus 0000:00 [ 0.575507] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.575510] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.575512] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.575514] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.575516] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 0.575519] pci_bus 0000:00: root bus resource [bus 00-3f] [ 0.575537] pci 0000:00:00.0: [8086:2770] type 00 class 0x060000 [ 0.575675] pci 0000:00:01.0: [8086:2771] type 01 class 0x060400 [ 0.575731] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.575875] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300 [ 0.575894] pci 0000:00:1b.0: reg 0x10: [mem 0xd6a00000-0xd6a03fff 64bit] [ 0.575974] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.576130] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400 [ 0.576216] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.576379] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400 [ 0.576470] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.576625] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400 [ 0.576711] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.576868] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400 [ 0.576954] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.577106] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300 [ 0.577149] pci 0000:00:1d.0: reg 0x20: [io 0xbc00-0xbc1f] [ 0.577306] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300 [ 0.577349] pci 0000:00:1d.1: reg 0x20: [io 0xb000-0xb01f] [ 0.577490] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300 [ 0.577533] pci 0000:00:1d.2: reg 0x20: [io 0xb400-0xb41f] [ 0.577673] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300 [ 0.577716] pci 0000:00:1d.3: reg 0x20: [io 0xb800-0xb81f] [ 0.577865] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320 [ 0.577882] pci 0000:00:1d.7: reg 0x10: [mem 0xd6a04000-0xd6a043ff] [ 0.578086] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.578268] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100 [ 0.578349] pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO [ 0.578354] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO [ 0.578358] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f) [ 0.578362] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f) [ 0.578506] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a [ 0.578522] pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007] [ 0.578532] pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003] [ 0.578541] pci 0000:00:1f.1: reg 0x18: [io 0x0000-0x0007] [ 0.578550] pci 0000:00:1f.1: reg 0x1c: [io 0x0000-0x0003] [ 0.578559] pci 0000:00:1f.1: reg 0x20: [io 0xf000-0xf00f] [ 0.578578] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.578580] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.578582] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.578584] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.578703] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f [ 0.578717] pci 0000:00:1f.2: reg 0x10: [io 0xd000-0xd007] [ 0.578725] pci 0000:00:1f.2: reg 0x14: [io 0xd400-0xd403] [ 0.578733] pci 0000:00:1f.2: reg 0x18: [io 0xd800-0xd807] [ 0.578741] pci 0000:00:1f.2: reg 0x1c: [io 0xdc00-0xdc03] [ 0.578749] pci 0000:00:1f.2: reg 0x20: [io 0xe000-0xe00f] [ 0.578797] pci 0000:00:1f.2: PME# supported from D3hot [ 0.578936] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500 [ 0.578990] pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f] [ 0.579184] pci 0000:01:00.0: [1002:68b8] type 00 class 0x030000 [ 0.579200] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.579211] pci 0000:01:00.0: reg 0x18: [mem 0xd1000000-0xd101ffff 64bit] [ 0.579219] pci 0000:01:00.0: reg 0x20: [io 0x7000-0x70ff] [ 0.579232] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 0.579239] pci 0000:01:00.0: enabling Extended Tags [ 0.579281] pci 0000:01:00.0: supports D1 D2 [ 0.579362] pci 0000:01:00.1: [1002:aa58] type 00 class 0x040300 [ 0.579379] pci 0000:01:00.1: reg 0x10: [mem 0xd1020000-0xd1023fff 64bit] [ 0.579413] pci 0000:01:00.1: enabling Extended Tags [ 0.579452] pci 0000:01:00.1: supports D1 D2 [ 0.579532] pci 0000:00:01.0: ASPM: current common clock configuration is inconsistent, reconfiguring [ 0.590789] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.590795] pci 0000:00:01.0: bridge window [io 0x7000-0x7fff] [ 0.590800] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd1ffffff] [ 0.590807] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.590893] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.590899] pci 0000:00:1c.0: bridge window [io 0x6000-0x6fff] [ 0.590999] pci 0000:03:00.0: [1095:3132] type 00 class 0x018000 [ 0.591031] pci 0000:03:00.0: reg 0x10: [mem 0xd3004000-0xd300407f 64bit] [ 0.591053] pci 0000:03:00.0: reg 0x18: [mem 0xd3000000-0xd3003fff 64bit] [ 0.591067] pci 0000:03:00.0: reg 0x20: [io 0x8000-0x807f] [ 0.591093] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref] [ 0.591176] pci 0000:03:00.0: supports D1 D2 [ 0.591267] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.591279] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.591283] pci 0000:00:1c.1: bridge window [io 0x8000-0x8fff] [ 0.591287] pci 0000:00:1c.1: bridge window [mem 0xd2000000-0xd3ffffff] [ 0.591369] pci 0000:04:00.0: [1131:7231] type 00 class 0x048000 [ 0.591401] pci 0000:04:00.0: reg 0x10: [mem 0xd6000000-0xd63fffff 64bit] [ 0.591422] pci 0000:04:00.0: reg 0x18: [mem 0xd6400000-0xd67fffff 64bit] [ 0.591540] pci 0000:04:00.0: supports D1 D2 [ 0.591542] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.602787] pci 0000:00:1c.2: PCI bridge to [bus 04] [ 0.602795] pci 0000:00:1c.2: bridge window [mem 0xd6000000-0xd67fffff] [ 0.602920] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000 [ 0.602944] pci 0000:05:00.0: reg 0x10: [io 0x9000-0x90ff] [ 0.602975] pci 0000:05:00.0: reg 0x18: [mem 0xd5000000-0xd5000fff 64bit] [ 0.603012] pci 0000:05:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 0.603023] pci 0000:05:00.0: enabling Extended Tags [ 0.603129] pci 0000:05:00.0: supports D1 D2 [ 0.603131] pci 0000:05:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.603253] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.603265] pci 0000:00:1c.3: PCI bridge to [bus 05] [ 0.603269] pci 0000:00:1c.3: bridge window [io 0x9000-0x9fff] [ 0.603273] pci 0000:00:1c.3: bridge window [mem 0xd4000000-0xd5ffffff] [ 0.603311] pci_bus 0000:06: extended config space not accessible [ 0.603344] pci 0000:06:00.0: [109e:036e] type 00 class 0x040000 [ 0.603361] pci 0000:06:00.0: reg 0x10: [mem 0xd6900000-0xd6900fff pref] [ 0.603505] pci 0000:06:00.1: [109e:0878] type 00 class 0x048000 [ 0.603523] pci 0000:06:00.1: reg 0x10: [mem 0xd6901000-0xd6901fff pref] [ 0.603684] pci 0000:06:01.0: [1106:3038] type 00 class 0x0c0300 [ 0.603733] pci 0000:06:01.0: reg 0x20: [io 0xa000-0xa01f] [ 0.603780] pci 0000:06:01.0: supports D1 D2 [ 0.603782] pci 0000:06:01.0: PME# supported from D0 D1 D2 D3hot [ 0.603852] pci 0000:06:01.1: [1106:3038] type 00 class 0x0c0300 [ 0.603900] pci 0000:06:01.1: reg 0x20: [io 0xa400-0xa41f] [ 0.603948] pci 0000:06:01.1: supports D1 D2 [ 0.603950] pci 0000:06:01.1: PME# supported from D0 D1 D2 D3hot [ 0.604014] pci 0000:06:01.2: [1106:3104] type 00 class 0x0c0320 [ 0.604032] pci 0000:06:01.2: reg 0x10: [mem 0xd6800000-0xd68000ff] [ 0.604110] pci 0000:06:01.2: supports D1 D2 [ 0.604112] pci 0000:06:01.2: PME# supported from D0 D1 D2 D3hot [ 0.604188] pci 0000:06:02.0: [1106:3038] type 00 class 0x0c0300 [ 0.604236] pci 0000:06:02.0: reg 0x20: [io 0xa800-0xa81f] [ 0.604284] pci 0000:06:02.0: supports D1 D2 [ 0.604285] pci 0000:06:02.0: PME# supported from D0 D1 D2 D3hot [ 0.604349] pci 0000:06:02.1: [1106:3038] type 00 class 0x0c0300 [ 0.604397] pci 0000:06:02.1: reg 0x20: [io 0xac00-0xac1f] [ 0.604444] pci 0000:06:02.1: supports D1 D2 [ 0.604446] pci 0000:06:02.1: PME# supported from D0 D1 D2 D3hot [ 0.604515] pci 0000:06:02.2: [1106:3104] type 00 class 0x0c0320 [ 0.604532] pci 0000:06:02.2: reg 0x10: [mem 0xd6801000-0xd68010ff] [ 0.604611] pci 0000:06:02.2: supports D1 D2 [ 0.604612] pci 0000:06:02.2: PME# supported from D0 D1 D2 D3hot [ 0.604712] pci 0000:00:1e.0: PCI bridge to [bus 06] (subtractive decode) [ 0.604716] pci 0000:00:1e.0: bridge window [io 0xa000-0xafff] [ 0.604720] pci 0000:00:1e.0: bridge window [mem 0xd6800000-0xd68fffff] [ 0.604726] pci 0000:00:1e.0: bridge window [mem 0xd6900000-0xd69fffff 64bit pref] [ 0.604729] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.604731] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.604739] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.604742] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode) [ 0.604744] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff window] (subtractive decode) [ 0.605487] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 *12 14 15) [ 0.605564] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.605638] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 14 15) [ 0.605712] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.605786] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.605859] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.605934] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.606009] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.606292] iommu: Default domain type: Translated [ 0.606805] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.606805] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.606805] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.606805] vgaarb: loaded [ 0.606951] EDAC MC: Ver: 3.0.0 [ 0.607079] NetLabel: Initializing [ 0.607079] NetLabel: domain hash size = 128 [ 0.607079] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.607079] NetLabel: unlabeled traffic allowed by default [ 0.607079] PCI: Using ACPI for IRQ routing [ 0.608515] PCI: pci_cache_line_size set to 64 bytes [ 0.608607] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff] [ 0.608609] e820: reserve RAM buffer [mem 0xbfff0000-0xbfffffff] [ 0.611020] hpet: 3 channels of 0 reserved for per-cpu timers [ 0.611026] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.611032] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.614757] clocksource: Switched to clocksource tsc-early [ 0.637541] VFS: Disk quotas dquot_6.6.0 [ 0.637576] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.637849] AppArmor: AppArmor Filesystem Enabled [ 0.637902] pnp: PnP ACPI init [ 0.638170] system 00:00: [io 0x04d0-0x04d1] has been reserved [ 0.638173] system 00:00: [io 0x0290-0x029f] has been reserved [ 0.638176] system 00:00: [io 0x0800-0x087f] has been reserved [ 0.638178] system 00:00: [io 0x0290-0x0294] has been reserved [ 0.638180] system 00:00: [io 0x0880-0x088f] has been reserved [ 0.638190] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.638284] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.638447] pnp 00:02: [dma 2] [ 0.638492] pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.638729] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.638969] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.639101] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.639213] system 00:06: [io 0x0400-0x04bf] could not be reserved [ 0.639221] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.639492] system 00:07: [mem 0xf0000000-0xf3ffffff] has been reserved [ 0.639500] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.639720] system 00:08: [mem 0x000cf600-0x000cffff] has been reserved [ 0.639723] system 00:08: [mem 0x000f0000-0x000f7fff] could not be reserved [ 0.639726] system 00:08: [mem 0x000f8000-0x000fbfff] could not be reserved [ 0.639728] system 00:08: [mem 0x000fc000-0x000fffff] could not be reserved [ 0.639731] system 00:08: [mem 0xbfff0000-0xbfffffff] could not be reserved [ 0.639733] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.639736] system 00:08: [mem 0x00100000-0xbffeffff] could not be reserved [ 0.639738] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.639740] system 00:08: [mem 0xfed13000-0xfed1dfff] has been reserved [ 0.639743] system 00:08: [mem 0xfed20000-0xfed8ffff] has been reserved [ 0.639745] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.639747] system 00:08: [mem 0xffb00000-0xffb7ffff] has been reserved [ 0.639749] system 00:08: [mem 0xfff00000-0xffffffff] has been reserved [ 0.639752] system 00:08: [mem 0x000e0000-0x000effff] has been reserved [ 0.639759] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.639767] pnp: PnP ACPI: found 9 devices [ 0.646877] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.647021] NET: Registered protocol family 2 [ 0.647223] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.648229] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 0.648440] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.649826] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear) [ 0.649917] TCP: Hash tables configured (established 32768 bind 32768) [ 0.650097] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.650143] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.650260] NET: Registered protocol family 1 [ 0.650272] NET: Registered protocol family 44 [ 0.650304] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000 [ 0.650308] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000 [ 0.650312] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000 [ 0.650316] pci 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000 [ 0.650319] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000 [ 0.650323] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000 add_align 100000 [ 0.650345] pci 0000:00:1c.0: BAR 14: assigned [mem 0xd6b00000-0xd6cfffff] [ 0.650350] pci 0000:00:1c.0: BAR 15: assigned [mem 0xd6d00000-0xd6efffff 64bit pref] [ 0.650354] pci 0000:00:1c.1: BAR 15: assigned [mem 0xd6f00000-0xd70fffff 64bit pref] [ 0.650358] pci 0000:00:1c.2: BAR 15: assigned [mem 0xd7100000-0xd72fffff 64bit pref] [ 0.650362] pci 0000:00:1c.3: BAR 15: assigned [mem 0xd7300000-0xd74fffff 64bit pref] [ 0.650366] pci 0000:00:1c.2: BAR 13: assigned [io 0x1000-0x1fff] [ 0.650373] pci 0000:01:00.0: BAR 6: assigned [mem 0xd0000000-0xd001ffff pref] [ 0.650376] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.650380] pci 0000:00:01.0: bridge window [io 0x7000-0x7fff] [ 0.650384] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd1ffffff] [ 0.650387] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.650391] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.650394] pci 0000:00:1c.0: bridge window [io 0x6000-0x6fff] [ 0.650399] pci 0000:00:1c.0: bridge window [mem 0xd6b00000-0xd6cfffff] [ 0.650403] pci 0000:00:1c.0: bridge window [mem 0xd6d00000-0xd6efffff 64bit pref] [ 0.650409] pci 0000:03:00.0: BAR 6: assigned [mem 0xd2000000-0xd207ffff pref] [ 0.650411] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.650414] pci 0000:00:1c.1: bridge window [io 0x8000-0x8fff] [ 0.650419] pci 0000:00:1c.1: bridge window [mem 0xd2000000-0xd3ffffff] [ 0.650423] pci 0000:00:1c.1: bridge window [mem 0xd6f00000-0xd70fffff 64bit pref] [ 0.650428] pci 0000:00:1c.2: PCI bridge to [bus 04] [ 0.650431] pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff] [ 0.650435] pci 0000:00:1c.2: bridge window [mem 0xd6000000-0xd67fffff] [ 0.650439] pci 0000:00:1c.2: bridge window [mem 0xd7100000-0xd72fffff 64bit pref] [ 0.650446] pci 0000:05:00.0: BAR 6: assigned [mem 0xd4000000-0xd400ffff pref] [ 0.650448] pci 0000:00:1c.3: PCI bridge to [bus 05] [ 0.650450] pci 0000:00:1c.3: bridge window [io 0x9000-0x9fff] [ 0.650455] pci 0000:00:1c.3: bridge window [mem 0xd4000000-0xd5ffffff] [ 0.650459] pci 0000:00:1c.3: bridge window [mem 0xd7300000-0xd74fffff 64bit pref] [ 0.650469] pci 0000:00:1e.0: PCI bridge to [bus 06] [ 0.650472] pci 0000:00:1e.0: bridge window [io 0xa000-0xafff] [ 0.650477] pci 0000:00:1e.0: bridge window [mem 0xd6800000-0xd68fffff] [ 0.650481] pci 0000:00:1e.0: bridge window [mem 0xd6900000-0xd69fffff 64bit pref] [ 0.650487] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.650489] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.650491] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.650493] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window] [ 0.650495] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] [ 0.650497] pci_bus 0000:01: resource 0 [io 0x7000-0x7fff] [ 0.650499] pci_bus 0000:01: resource 1 [mem 0xd0000000-0xd1ffffff] [ 0.650501] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.650503] pci_bus 0000:02: resource 0 [io 0x6000-0x6fff] [ 0.650505] pci_bus 0000:02: resource 1 [mem 0xd6b00000-0xd6cfffff] [ 0.650507] pci_bus 0000:02: resource 2 [mem 0xd6d00000-0xd6efffff 64bit pref] [ 0.650509] pci_bus 0000:03: resource 0 [io 0x8000-0x8fff] [ 0.650511] pci_bus 0000:03: resource 1 [mem 0xd2000000-0xd3ffffff] [ 0.650513] pci_bus 0000:03: resource 2 [mem 0xd6f00000-0xd70fffff 64bit pref] [ 0.650515] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff] [ 0.650517] pci_bus 0000:04: resource 1 [mem 0xd6000000-0xd67fffff] [ 0.650519] pci_bus 0000:04: resource 2 [mem 0xd7100000-0xd72fffff 64bit pref] [ 0.650521] pci_bus 0000:05: resource 0 [io 0x9000-0x9fff] [ 0.650523] pci_bus 0000:05: resource 1 [mem 0xd4000000-0xd5ffffff] [ 0.650525] pci_bus 0000:05: resource 2 [mem 0xd7300000-0xd74fffff 64bit pref] [ 0.650527] pci_bus 0000:06: resource 0 [io 0xa000-0xafff] [ 0.650529] pci_bus 0000:06: resource 1 [mem 0xd6800000-0xd68fffff] [ 0.650531] pci_bus 0000:06: resource 2 [mem 0xd6900000-0xd69fffff 64bit pref] [ 0.650533] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7 window] [ 0.650534] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff window] [ 0.650536] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.650538] pci_bus 0000:06: resource 7 [mem 0x000c0000-0x000dffff window] [ 0.650540] pci_bus 0000:06: resource 8 [mem 0xc0000000-0xfebfffff window] [ 0.651445] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.651516] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0 [ 0.652262] PCI: CLS 32 bytes, default 64 [ 0.652349] Trying to unpack rootfs image as initramfs... [ 2.184070] Freeing initrd memory: 71764K [ 2.185147] Initialise system trusted keyrings [ 2.185175] Key type blacklist registered [ 2.185277] workingset: timestamp_bits=36 max_order=20 bucket_order=0 [ 2.187805] zbud: loaded [ 2.188155] integrity: Platform Keyring initialized [ 2.188161] Key type asymmetric registered [ 2.188164] Asymmetric key parser 'x509' registered [ 2.188187] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 2.188309] io scheduler mq-deadline registered [ 2.190190] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 2.190213] intel_idle: MWAIT substates: 0x220 [ 2.190219] intel_idle: ACPI _CST not found or not usable [ 2.190821] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.190974] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 2.191800] Linux agpgart interface v0.103 [ 2.192013] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 2.192280] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 2.192282] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 2.192430] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.192617] mousedev: PS/2 mouse device common for all mice [ 2.192675] rtc_cmos 00:01: RTC can wake from S4 [ 2.192934] rtc_cmos 00:01: registered as rtc0 [ 2.192971] rtc_cmos 00:01: setting system clock to 2023-05-04T19:55:07 UTC (1683230107) [ 2.193018] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs [ 2.193032] intel_pstate: CPU model not supported [ 2.193058] ledtrig-cpu: registered to indicate activity on CPUs [ 2.193662] NET: Registered protocol family 10 [ 2.207500] Segment Routing with IPv6 [ 2.207543] mip6: Mobile IPv6 [ 2.207548] NET: Registered protocol family 17 [ 2.207634] mpls_gso: MPLS GSO support [ 2.207903] microcode: sig=0x6fd, pf=0x1, revision=0xa4 [ 2.207911] microcode: Microcode Update Driver: v2.2. [ 2.207918] IPI shorthand broadcast: enabled [ 2.207946] sched_clock: Marking stable (2205871213, 1877852)->(2278598402, -70849337) [ 2.208083] registered taskstats version 1 [ 2.208090] Loading compiled-in X.509 certificates [ 2.218094] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 2.276707] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 2.276736] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' [ 2.276782] zswap: loaded using pool lzo/zbud [ 2.277000] Key type .fscrypt registered [ 2.277002] Key type fscrypt-provisioning registered [ 2.277087] AppArmor: AppArmor sha1 policy hashing enabled [ 2.279716] Freeing unused decrypted memory: 2036K [ 2.281226] Freeing unused kernel image (initmem) memory: 2668K [ 2.302808] Write protecting the kernel read-only data: 22528k [ 2.304207] Freeing unused kernel image (text/rodata gap) memory: 2040K [ 2.304611] Freeing unused kernel image (rodata/data gap) memory: 624K [ 2.370104] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.370120] x86/mm: Checking user space page tables [ 2.433935] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.433948] Run /init as init process [ 2.433950] with arguments: [ 2.433952] /init [ 2.433953] with environment: [ 2.433954] HOME=/ [ 2.433956] TERM=linux [ 2.433957] BOOT_IMAGE=/boot/vmlinuz-5.10.0-22-amd64 [ 2.553503] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 2.553565] ACPI: Power Button [PWRB] [ 2.553705] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 2.566743] Floppy drive(s): fd0 is 1.44M [ 2.566861] ACPI: Power Button [PWRF] [ 2.616015] FDC 0 is a post-1991 82077 [ 2.636950] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x000000000000042C-0x000000000000042D (\GP2C) (20200925/utaddress-204) [ 2.636960] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.637004] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 2.707399] ACPI: bus type USB registered [ 2.707448] usbcore: registered new interface driver usbfs [ 2.707468] usbcore: registered new interface driver hub [ 2.707490] usbcore: registered new device driver usb [ 2.718823] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 2.737876] SCSI subsystem initialized [ 2.762281] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.789467] r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control [ 2.796763] ehci-pci: EHCI PCI platform driver [ 2.796989] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 2.796999] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 2.800926] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported [ 2.833318] uhci_hcd: USB Universal Host Controller Interface driver [ 2.834819] ehci-pci 0000:00:1d.7: irq 23, io mem 0xd6a04000 [ 2.850793] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 2.850915] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 2.850918] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.850920] usb usb1: Product: EHCI Host Controller [ 2.850922] usb usb1: Manufacturer: Linux 5.10.0-22-amd64 ehci_hcd [ 2.850924] usb usb1: SerialNumber: 0000:00:1d.7 [ 2.851125] hub 1-0:1.0: USB hub found [ 2.851136] hub 1-0:1.0: 8 ports detected [ 2.867725] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.867743] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 2.867755] uhci_hcd 0000:00:1d.0: detected 2 ports [ 2.867782] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000bc00 [ 2.867886] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10 [ 2.867890] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.867892] usb usb2: Product: UHCI Host Controller [ 2.867894] usb usb2: Manufacturer: Linux 5.10.0-22-amd64 uhci_hcd [ 2.867896] usb usb2: SerialNumber: 0000:00:1d.0 [ 2.868123] hub 2-0:1.0: USB hub found [ 2.868152] hub 2-0:1.0: 2 ports detected [ 2.868381] ehci-pci 0000:06:01.2: EHCI Host Controller [ 2.868393] ehci-pci 0000:06:01.2: new USB bus registered, assigned bus number 3 [ 2.868478] ehci-pci 0000:06:01.2: irq 16, io mem 0xd6800000 [ 2.873625] r8169 0000:05:00.0 eth0: RTL8168b/8111b, 00:1d:7d:c7:76:51, XID 380, IRQ 19 [ 2.873631] r8169 0000:05:00.0 eth0: jumbo features [frames: 4074 bytes, tx checksumming: ko] [ 2.875768] libata version 3.00 loaded. [ 2.880780] sata_sil24 0000:03:00.0: version 1.1 [ 2.881660] ata_piix 0000:00:1f.1: version 2.13 [ 2.882842] ehci-pci 0000:06:01.2: USB 2.0 started, EHCI 1.00 [ 2.882949] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 2.882952] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.882955] usb usb3: Product: EHCI Host Controller [ 2.882956] usb usb3: Manufacturer: Linux 5.10.0-22-amd64 ehci_hcd [ 2.882958] usb usb3: SerialNumber: 0000:06:01.2 [ 2.886427] hub 3-0:1.0: USB hub found [ 2.886442] hub 3-0:1.0: 4 ports detected [ 2.900739] r8169 0000:05:00.0 enp5s0: renamed from eth0 [ 2.900797] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 2.900814] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4 [ 2.900826] uhci_hcd 0000:00:1d.1: detected 2 ports [ 2.900855] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b000 [ 2.901126] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10 [ 2.901130] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.901132] usb usb4: Product: UHCI Host Controller [ 2.901134] usb usb4: Manufacturer: Linux 5.10.0-22-amd64 uhci_hcd [ 2.901136] usb usb4: SerialNumber: 0000:00:1d.1 [ 2.901352] hub 4-0:1.0: USB hub found [ 2.901365] hub 4-0:1.0: 2 ports detected [ 2.901848] ehci-pci 0000:06:02.2: EHCI Host Controller [ 2.901860] ehci-pci 0000:06:02.2: new USB bus registered, assigned bus number 5 [ 2.901946] ehci-pci 0000:06:02.2: irq 20, io mem 0xd6801000 [ 2.902423] scsi host0: sata_sil24 [ 2.905484] scsi host1: ata_piix [ 2.905537] [drm] radeon kernel modesetting enabled. [ 2.905655] radeon 0000:01:00.0: vgaarb: deactivate vga console [ 2.905738] scsi host2: sata_sil24 [ 2.905848] ata1: SATA max UDMA/100 host m128@0xd3004000 port 0xd3000000 irq 17 [ 2.905852] ata2: SATA max UDMA/100 host m128@0xd3004000 port 0xd3002000 irq 17 [ 2.906515] Console: switching to colour dummy device 80x25 [ 2.907029] [drm] initializing kernel modesetting (JUNIPER 0x1002:0x68B8 0x1682:0x2990 0x00). [ 2.907101] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than pnp 00:08 [mem 0x000cf600-0x000cffff] [ 2.907109] caller pci_map_rom+0x7c/0x1d0 mapping multiple BARs [ 2.907251] ATOM BIOS: JUNIPER [ 2.907326] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used) [ 2.907329] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF [ 2.907338] [drm] Detected VRAM RAM=1024M, BAR=256M [ 2.907339] [drm] RAM width 128bits DDR [ 2.907543] [TTM] Zone kernel: Available graphics memory: 1523672 KiB [ 2.907546] [TTM] Initializing pool allocator [ 2.907554] [TTM] Initializing DMA pool allocator [ 2.907572] scsi host3: ata_piix [ 2.907582] [drm] radeon: 1024M of VRAM memory ready [ 2.907583] [drm] radeon: 1024M of GTT memory ready. [ 2.907603] [drm] Loading JUNIPER Microcode [ 2.907661] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/JUNIPER_pfp.bin [ 2.907675] ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 2.907678] ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 2.907697] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/JUNIPER_me.bin [ 2.907725] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/JUNIPER_rlc.bin [ 2.907783] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/JUNIPER_smc.bin [ 2.907789] [drm] Internal thermal controller with fan control [ 2.907844] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 2.912034] scsi host4: ata_piix [ 2.913014] scsi host5: ata_piix [ 2.913104] ata5: SATA max UDMA/133 cmd 0xd000 ctl 0xd400 bmdma 0xe000 irq 19 [ 2.913106] ata6: SATA max UDMA/133 cmd 0xd800 ctl 0xdc00 bmdma 0xe008 irq 19 [ 2.918783] ehci-pci 0000:06:02.2: USB 2.0 started, EHCI 1.00 [ 2.919857] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 2.919862] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.919865] usb usb5: Product: EHCI Host Controller [ 2.919867] usb usb5: Manufacturer: Linux 5.10.0-22-amd64 ehci_hcd [ 2.919869] usb usb5: SerialNumber: 0000:06:02.2 [ 2.922621] hub 5-0:1.0: USB hub found [ 2.922636] hub 5-0:1.0: 4 ports detected [ 2.924525] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 2.924540] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6 [ 2.924553] uhci_hcd 0000:00:1d.2: detected 2 ports [ 2.924596] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b400 [ 2.924718] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10 [ 2.924721] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.924723] usb usb6: Product: UHCI Host Controller [ 2.924725] usb usb6: Manufacturer: Linux 5.10.0-22-amd64 uhci_hcd [ 2.924727] usb usb6: SerialNumber: 0000:00:1d.2 [ 2.925180] hub 6-0:1.0: USB hub found [ 2.925355] hub 6-0:1.0: 2 ports detected [ 2.925741] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 2.925751] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 7 [ 2.925759] uhci_hcd 0000:00:1d.3: detected 2 ports [ 2.925782] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000b800 [ 2.926231] [drm] radeon: dpm initialized [ 2.926368] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/CYPRESS_uvd.bin [ 2.926413] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 2.926563] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10 [ 2.926567] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.926570] usb usb7: Product: UHCI Host Controller [ 2.926572] usb usb7: Manufacturer: Linux 5.10.0-22-amd64 uhci_hcd [ 2.926574] usb usb7: SerialNumber: 0000:00:1d.3 [ 2.927658] hub 7-0:1.0: USB hub found [ 2.927777] hub 7-0:1.0: 2 ports detected [ 2.929049] uhci_hcd 0000:06:01.0: UHCI Host Controller [ 2.929074] uhci_hcd 0000:06:01.0: new USB bus registered, assigned bus number 8 [ 2.929087] uhci_hcd 0000:06:01.0: detected 2 ports [ 2.929129] uhci_hcd 0000:06:01.0: irq 19, io base 0x0000a000 [ 2.930482] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10 [ 2.930486] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.930489] usb usb8: Product: UHCI Host Controller [ 2.930491] usb usb8: Manufacturer: Linux 5.10.0-22-amd64 uhci_hcd [ 2.930493] usb usb8: SerialNumber: 0000:06:01.0 [ 2.930747] hub 8-0:1.0: USB hub found [ 2.930929] hub 8-0:1.0: 2 ports detected [ 2.931817] uhci_hcd 0000:06:01.1: UHCI Host Controller [ 2.931827] uhci_hcd 0000:06:01.1: new USB bus registered, assigned bus number 9 [ 2.931837] uhci_hcd 0000:06:01.1: detected 2 ports [ 2.931873] uhci_hcd 0000:06:01.1: irq 18, io base 0x0000a400 [ 2.931955] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10 [ 2.931958] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.931960] usb usb9: Product: UHCI Host Controller [ 2.931962] usb usb9: Manufacturer: Linux 5.10.0-22-amd64 uhci_hcd [ 2.931964] usb usb9: SerialNumber: 0000:06:01.1 [ 2.932688] hub 9-0:1.0: USB hub found [ 2.932700] hub 9-0:1.0: 2 ports detected [ 2.933053] uhci_hcd 0000:06:02.0: UHCI Host Controller [ 2.933062] uhci_hcd 0000:06:02.0: new USB bus registered, assigned bus number 10 [ 2.933071] uhci_hcd 0000:06:02.0: detected 2 ports [ 2.933098] uhci_hcd 0000:06:02.0: irq 18, io base 0x0000a800 [ 2.933741] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10 [ 2.933745] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.933747] usb usb10: Product: UHCI Host Controller [ 2.933749] usb usb10: Manufacturer: Linux 5.10.0-22-amd64 uhci_hcd [ 2.933751] usb usb10: SerialNumber: 0000:06:02.0 [ 2.933957] hub 10-0:1.0: USB hub found [ 2.933968] hub 10-0:1.0: 2 ports detected [ 2.935012] uhci_hcd 0000:06:02.1: UHCI Host Controller [ 2.935033] uhci_hcd 0000:06:02.1: new USB bus registered, assigned bus number 11 [ 2.935043] uhci_hcd 0000:06:02.1: detected 2 ports [ 2.935070] uhci_hcd 0000:06:02.1: irq 16, io base 0x0000ac00 [ 2.935146] usb usb11: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10 [ 2.935149] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.935151] usb usb11: Product: UHCI Host Controller [ 2.935153] usb usb11: Manufacturer: Linux 5.10.0-22-amd64 uhci_hcd [ 2.935155] usb usb11: SerialNumber: 0000:06:02.1 [ 2.935351] hub 11-0:1.0: USB hub found [ 2.935361] hub 11-0:1.0: 2 ports detected [ 2.943420] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000). [ 2.943536] radeon 0000:01:00.0: WB enabled [ 2.943539] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 [ 2.943542] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c [ 2.943994] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 [ 2.944302] radeon 0000:01:00.0: radeon: MSI limited to 32-bit [ 2.944356] radeon 0000:01:00.0: radeon: using MSI. [ 2.944384] [drm] radeon: irq initialized. [ 2.961081] [drm] ring test on 0 succeeded in 1 usecs [ 2.961089] [drm] ring test on 3 succeeded in 2 usecs [ 3.084944] ata6.00: HPA detected: current 976771055, native 976773168 [ 3.084951] ata6.00: ATA-8: STM3500418AS, CC3D, max UDMA/133 [ 3.084954] ata6.00: 976771055 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 3.085333] ata3.00: ATAPI: TSSTcorpDVD-ROM SH-D162D, SB03, max UDMA/33 [ 3.085618] ata3.01: HPA detected: current 240119615, native 240121728 [ 3.085621] ata3.01: ATA-7: Maxtor 6Y120P0, YAR41BW0, max UDMA/133 [ 3.085623] ata3.01: 240119615 sectors, multi 16: LBA [ 3.085902] ata5.00: HPA detected: current 488395055, native 488397168 [ 3.085906] ata5.00: ATA-8: Hitachi HDP725025GLA380, GM2OA52A, max UDMA/133 [ 3.085908] ata5.00: 488395055 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 3.086105] ata5.01: HPA detected: current 488395055, native 488397168 [ 3.086109] ata5.01: ATA-8: Hitachi HDP725025GLA380, GM2OA52A, max UDMA/133 [ 3.086111] ata5.01: 488395055 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 3.106771] usb 1-3: new high-speed USB device number 2 using ehci-pci [ 3.138767] usb 3-1: new high-speed USB device number 2 using ehci-pci [ 3.146784] [drm] ring test on 5 succeeded in 1 usecs [ 3.146793] [drm] UVD initialized successfully. [ 3.147293] [drm] ib test on ring 0 succeeded in 0 usecs [ 3.147374] [drm] ib test on ring 3 succeeded in 0 usecs [ 3.317182] tsc: Refined TSC clocksource calibration: 2009.658 MHz [ 3.317191] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1cf7d1c5890, max_idle_ns: 440795238470 ns [ 3.317232] [drm] ib test on ring 5 succeeded [ 3.317496] usb 5-1: new high-speed USB device number 2 using ehci-pci [ 3.318146] [drm] Radeon Display Connectors [ 3.318150] [drm] Connector 0: [ 3.318151] [drm] DP-1 [ 3.318153] [drm] HPD4 [ 3.318155] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c [ 3.318156] [drm] Encoders: [ 3.318157] [drm] DFP1: INTERNAL_UNIPHY2 [ 3.318159] [drm] Connector 1: [ 3.318160] [drm] HDMI-A-1 [ 3.318161] [drm] HPD5 [ 3.318163] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c [ 3.318164] [drm] Encoders: [ 3.318165] [drm] DFP2: INTERNAL_UNIPHY2 [ 3.318166] [drm] Connector 2: [ 3.318167] [drm] DVI-I-1 [ 3.318168] [drm] HPD1 [ 3.318170] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c [ 3.318171] [drm] Encoders: [ 3.318172] [drm] DFP3: INTERNAL_UNIPHY1 [ 3.318173] [drm] CRT2: INTERNAL_KLDSCP_DAC2 [ 3.318174] [drm] Connector 3: [ 3.318175] [drm] DVI-I-2 [ 3.318176] [drm] HPD6 [ 3.318178] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c [ 3.318179] [drm] Encoders: [ 3.318181] [drm] DFP4: INTERNAL_UNIPHY [ 3.318182] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 3.320222] clocksource: Switched to clocksource tsc [ 3.407125] usb 1-3: New USB device found, idVendor=0409, idProduct=005a, bcdDevice= 1.00 [ 3.407131] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.407521] hub 1-3:1.0: USB hub found [ 3.407698] usb 3-1: New USB device found, idVendor=2040, idProduct=9950, bcdDevice= 1.00 [ 3.407701] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.407703] usb 3-1: Product: WinTV Nova-DT [ 3.407705] usb 3-1: Manufacturer: Hauppauge [ 3.407707] usb 3-1: SerialNumber: 4028917118 [ 3.407768] hub 1-3:1.0: 4 ports detected [ 3.417294] [drm] fb mappable at 0xC034D000 [ 3.417297] [drm] vram apper at 0xC0000000 [ 3.417298] [drm] size 5242880 [ 3.417300] [drm] fb depth is 24 [ 3.417301] [drm] pitch is 5120 [ 3.417406] fbcon: radeondrmfb (fb0) is primary device [ 3.444437] Console: switching to colour frame buffer device 160x64 [ 3.448262] radeon 0000:01:00.0: [drm] fb0: radeondrmfb frame buffer device [ 3.462968] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0 [ 3.475680] usb 5-1: New USB device found, idVendor=2040, idProduct=9950, bcdDevice= 1.00 [ 3.475686] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.475689] usb 5-1: Product: WinTV Nova-DT [ 3.475698] usb 5-1: Manufacturer: Hauppauge [ 3.475700] usb 5-1: SerialNumber: 4028916467 [ 4.958801] ata1: SATA link down (SStatus 0 SControl 0) [ 7.011631] ata2: SATA link down (SStatus 0 SControl 0) [ 7.012832] scsi 1:0:0:0: CD-ROM TSSTcorp DVD-ROM SH-D162D SB03 PQ: 0 ANSI: 5 [ 7.039632] scsi 1:0:1:0: Direct-Access ATA Maxtor 6Y120P0 1BW0 PQ: 0 ANSI: 5 [ 7.040136] scsi 4:0:0:0: Direct-Access ATA Hitachi HDP72502 A52A PQ: 0 ANSI: 5 [ 7.040600] scsi 4:0:1:0: Direct-Access ATA Hitachi HDP72502 A52A PQ: 0 ANSI: 5 [ 7.041046] scsi 5:0:0:0: Direct-Access ATA STM3500418AS CC3D PQ: 0 ANSI: 5 [ 7.128483] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/32x cd/rw xa/form2 cdda tray [ 7.128490] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 7.174973] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 7.175550] sd 4:0:0:0: [sdb] 488395055 512-byte logical blocks: (250 GB/233 GiB) [ 7.175569] sd 4:0:0:0: [sdb] Write Protect is off [ 7.175572] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 7.175599] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7.175755] sd 1:0:1:0: [sda] 240119615 512-byte logical blocks: (123 GB/114 GiB) [ 7.175772] sd 1:0:1:0: [sda] Write Protect is off [ 7.175775] sd 1:0:1:0: [sda] Mode Sense: 00 3a 00 00 [ 7.175801] sd 1:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7.176010] sd 4:0:1:0: [sdc] 488395055 512-byte logical blocks: (250 GB/233 GiB) [ 7.176028] sd 4:0:1:0: [sdc] Write Protect is off [ 7.176031] sd 4:0:1:0: [sdc] Mode Sense: 00 3a 00 00 [ 7.176056] sd 4:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7.176455] sd 5:0:0:0: [sdd] 976771055 512-byte logical blocks: (500 GB/466 GiB) [ 7.176472] sd 5:0:0:0: [sdd] Write Protect is off [ 7.176475] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 7.176500] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7.201754] sdd: sdd1 sdd2 sdd3 [ 7.202406] sdc: sdc1 [ 7.215056] sd 5:0:0:0: [sdd] Attached SCSI disk [ 7.218315] sdb: sdb1 sdb2 < sdb5 > [ 7.223101] sd 4:0:1:0: [sdc] Attached SCSI disk [ 7.231086] sd 4:0:0:0: [sdb] Attached SCSI disk [ 7.275541] sda: sda1 [ 7.319412] sd 1:0:1:0: [sda] Attached SCSI disk [ 7.657911] random: lvm: uninitialized urandom read (4 bytes read) [ 7.691603] random: lvm: uninitialized urandom read (4 bytes read) [ 7.949461] device-mapper: uevent: version 1.0.3 [ 7.949588] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 7.951331] random: lvm: uninitialized urandom read (2 bytes read) [ 8.730522] PM: Image not found (code -22) [ 9.125963] random: crng init done [ 9.125969] random: 2 urandom warning(s) missed due to ratelimiting [ 9.154955] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 9.577605] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 10.898295] systemd[1]: Inserted module 'autofs4' [ 11.142091] systemd[1]: systemd 247.3-7+deb11u2 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 11.158933] systemd[1]: Detected architecture x86-64. [ 11.185114] systemd[1]: Set hostname to <sorbus>. [ 13.479671] systemd[1]: /lib/systemd/system/plymouth-start.service:16: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed. [ 14.250391] systemd[1]: Queued start job for default target Multi-User System. [ 14.267348] systemd[1]: Created slice system-getty.slice. [ 14.267993] systemd[1]: Created slice system-modprobe.slice. [ 14.268489] systemd[1]: Created slice User and Session Slice. [ 14.268641] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 14.268975] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 14.269098] systemd[1]: Reached target Remote File Systems. [ 14.269131] systemd[1]: Reached target Slices. [ 14.269321] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 14.269550] systemd[1]: Listening on LVM2 poll daemon socket. [ 14.280097] systemd[1]: Listening on Syslog Socket. [ 14.280330] systemd[1]: Listening on fsck to fsckd communication Socket. [ 14.280464] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 14.280816] systemd[1]: Listening on Journal Audit Socket. [ 14.281033] systemd[1]: Listening on Journal Socket (/dev/log). [ 14.281298] systemd[1]: Listening on Journal Socket. [ 14.284686] systemd[1]: Listening on udev Control Socket. [ 14.284922] systemd[1]: Listening on udev Kernel Socket. [ 14.286559] systemd[1]: Mounting Huge Pages File System... [ 14.288632] systemd[1]: Mounting POSIX Message Queue File System... [ 14.290649] systemd[1]: Mounting Kernel Debug File System... [ 14.292628] systemd[1]: Mounting Kernel Trace File System... [ 14.293041] systemd[1]: Finished Availability of block devices. [ 14.296241] systemd[1]: Starting Set the console keyboard layout... [ 14.298451] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 14.300653] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 14.303060] systemd[1]: Starting Load Kernel Module configfs... [ 14.305283] systemd[1]: Starting Load Kernel Module drm... [ 14.318689] systemd[1]: Starting Load Kernel Module fuse... [ 14.421767] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 14.421881] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 14.424962] systemd[1]: Starting Journal Service... [ 14.512845] systemd[1]: Starting Load Kernel Modules... [ 14.514588] systemd[1]: Starting Remount Root and Kernel File Systems... [ 14.523116] systemd[1]: Starting Coldplug All udev Devices... [ 14.526019] fuse: init (API version 7.32) [ 14.527684] systemd[1]: Mounted Huge Pages File System. [ 14.528145] systemd[1]: Mounted POSIX Message Queue File System. [ 14.528529] systemd[1]: Mounted Kernel Debug File System. [ 14.528877] systemd[1]: Mounted Kernel Trace File System. [ 14.529655] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 14.530357] systemd[1]: modprobe@configfs.service: Succeeded. [ 14.530829] systemd[1]: Finished Load Kernel Module configfs. [ 14.531389] systemd[1]: modprobe@drm.service: Succeeded. [ 14.531811] systemd[1]: Finished Load Kernel Module drm. [ 14.532381] systemd[1]: modprobe@fuse.service: Succeeded. [ 14.532784] systemd[1]: Finished Load Kernel Module fuse. [ 14.534734] systemd[1]: Mounting FUSE Control File System... [ 14.536857] systemd[1]: Mounting Kernel Configuration File System... [ 14.540006] systemd[1]: Mounted FUSE Control File System. [ 14.542616] systemd[1]: Mounted Kernel Configuration File System. [ 14.770469] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling. [ 14.820435] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro [ 14.823973] systemd[1]: Finished Remount Root and Kernel File Systems. [ 14.935857] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 14.935981] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 14.938255] systemd[1]: Starting Load/Save Random Seed... [ 14.940917] systemd[1]: Starting Create System Users... [ 14.941493] systemd[1]: Started Journal Service. [ 15.208640] systemd-journald[259]: Received client request to flush runtime journal. [ 15.740797] lp: driver loaded but no devices found [ 15.879215] ppdev: user-space parallel port driver [ 15.967543] parport_pc 00:04: reported by Plug and Play ACPI [ 15.967631] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 16.063033] lp0: using parport0 (interrupt-driven). [ 18.368345] audit: type=1400 audit(1683230123.672:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=300 comm="apparmor_parser" [ 18.760105] audit: type=1400 audit(1683230124.064:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session" pid=301 comm="apparmor_parser" [ 18.760118] audit: type=1400 audit(1683230124.064:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session//chromium" pid=301 comm="apparmor_parser" [ 18.811537] audit: type=1400 audit(1683230124.116:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=303 comm="apparmor_parser" [ 18.864913] audit: type=1400 audit(1683230124.168:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=304 comm="apparmor_parser" [ 19.086140] audit: type=1400 audit(1683230124.388:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=306 comm="apparmor_parser" [ 19.086149] audit: type=1400 audit(1683230124.388:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=306 comm="apparmor_parser" [ 19.086153] audit: type=1400 audit(1683230124.388:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=306 comm="apparmor_parser" [ 19.184661] audit: type=1400 audit(1683230124.488:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=305 comm="apparmor_parser" [ 19.184672] audit: type=1400 audit(1683230124.488:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=305 comm="apparmor_parser" [ 21.575630] intel_rng: FWH not detected [ 22.049321] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 22.191607] leds_ss4200: no LED devices found [ 22.227805] platform coretemp.0: Using relative temperature scale! [ 22.231075] sr 1:0:0:0: Attached scsi generic sg0 type 5 [ 22.233223] sd 1:0:1:0: Attached scsi generic sg1 type 0 [ 22.235435] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 22.237548] sd 4:0:1:0: Attached scsi generic sg3 type 0 [ 22.238930] sd 5:0:0:0: Attached scsi generic sg4 type 0 [ 22.239213] platform coretemp.0: Using relative temperature scale! [ 22.310785] mc: Linux media interface: v0.10 [ 22.457340] videodev: Linux video capture interface: v2.00 [ 22.692595] iTCO_vendor_support: vendor-support=0 [ 22.864219] intel_powerclamp: No package C-state available [ 22.946291] snd_bt87x 0000:06:00.1: bt87x0: Using board 1, analog, digital (rate 32000 Hz) [ 23.394067] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 23.394139] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460) [ 23.394639] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 25.171970] bttv: driver version 0.9.19 loaded [ 25.171977] bttv: using 8 buffers with 2080k (520 pages) each for capture [ 25.172084] bttv: Bt8xx card found (0) [ 25.173378] bttv: 0: Bt878 (rev 17) at 0000:06:00.0, irq: 20, latency: 32, mmio: 0xd6900000 [ 25.173406] bttv: 0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb [ 25.173409] bttv: 0: using: Hauppauge (bt878) [card=10,autodetected] [ 25.175975] bttv: 0: Hauppauge/Voodoo msp34xx: reset line init [5] [ 25.209243] tveeprom: Hauppauge model 44805, rev C111, serial# 2321503 [ 25.209247] tveeprom: tuner model is Philips FI1246 MK2 (idx 11, type 1) [ 25.209250] tveeprom: TV standards PAL(I) (eeprom 0x10) [ 25.209253] tveeprom: audio processor is None (idx 0) [ 25.209255] tveeprom: has no radio [ 25.209257] bttv: 0: Hauppauge eeprom indicates model#44805 [ 25.209260] bttv: 0: tuner type=1 [ 25.924513] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in cold state, will try to load a firmware [ 25.987697] bttv: 0: audio absent, no audio device found! [ 25.991463] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input4 [ 26.162567] usb 3-1: firmware: direct-loading firmware dvb-usb-dib0700-1.20.fw [ 26.251189] tuner: 10-0061: Tuner -1 found with type(s) Radio TV. [ 26.367177] dib0700: firmware started successfully. [ 26.570234] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC888: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 26.570242] snd_hda_codec_realtek hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 26.570247] snd_hda_codec_realtek hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 26.570250] snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0 [ 26.570253] snd_hda_codec_realtek hdaudioC0D2: dig-out=0x1e/0x0 [ 26.570256] snd_hda_codec_realtek hdaudioC0D2: inputs: [ 26.570261] snd_hda_codec_realtek hdaudioC0D2: Rear Mic=0x18 [ 26.570265] snd_hda_codec_realtek hdaudioC0D2: Front Mic=0x19 [ 26.570268] snd_hda_codec_realtek hdaudioC0D2: Line=0x1a [ 26.570271] snd_hda_codec_realtek hdaudioC0D2: CD=0x1c [ 26.570274] snd_hda_codec_realtek hdaudioC0D2: dig-in=0x1f [ 26.594708] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5 [ 26.594891] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 26.595023] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 26.595168] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 26.595295] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 26.595426] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 26.595556] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 26.595691] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 26.595893] snd_hda_intel 0000:00:1b.0: device 1458:a002 is on the power_save denylist, forcing power_save to 0 [ 26.741989] tuner-simple 10-0061: creating new instance [ 26.741996] tuner-simple 10-0061: type set to 1 (Philips PAL_I (FI1246 and compatibles)) [ 26.743480] bttv: 0: Setting PLL: 28636363 => 35468950 (needs up to 100ms) [ 26.782817] bttv: PLL set ok [ 26.783632] bttv: 0: registered device video0 [ 26.783826] bttv: 0: registered device vbi0 [ 26.899028] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in warm state. [ 26.899137] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 26.899417] dvbdev: DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T) [ 26.899430] usb 3-1: media controller created [ 26.900710] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered. [ 26.966791] Adding 999420k swap on /dev/mapper/sorbus--vg-swap_1. Priority:-2 extents:1 across:999420k FS [ 27.031678] usb 3-1: DVB: registering adapter 0 frontend 0 (DiBcom 3000MC/P)... [ 27.031690] dvbdev: dvb_create_media_entity: media entity 'DiBcom 3000MC/P' registered. [ 27.098792] MT2060: successfully identified (IF1 = 1229) [ 27.665040] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 27.665277] dvbdev: DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T) [ 27.665289] usb 3-1: media controller created [ 27.666535] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered. [ 27.682830] usb 3-1: DVB: registering adapter 1 frontend 0 (DiBcom 3000MC/P)... [ 27.682844] dvbdev: dvb_create_media_entity: media entity 'DiBcom 3000MC/P' registered. [ 27.687692] MT2060: successfully identified (IF1 = 1238) [ 28.494789] Registered IR keymap rc-dib0700-rc5 [ 28.495197] rc rc0: Hauppauge Nova-T 500 Dual DVB-T as /devices/pci0000:00/0000:00:1e.0/0000:06:01.2/usb3/3-1/rc/rc0 [ 28.495301] rc rc0: lirc_dev: driver (null) registered at minor = 0, scancode receiver, no transmitter [ 28.495363] input: Hauppauge Nova-T 500 Dual DVB-T as /devices/pci0000:00/0000:00:1e.0/0000:06:01.2/usb3/3-1/rc/rc0/input13 [ 28.497258] dvb-usb: schedule remote query interval to 50 msecs. [ 28.497265] dvb-usb: Hauppauge Nova-T 500 Dual DVB-T successfully initialized and connected. [ 28.504440] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in cold state, will try to load a firmware [ 28.504520] usb 5-1: firmware: direct-loading firmware dvb-usb-dib0700-1.20.fw [ 28.721062] dib0700: firmware started successfully. [ 29.235044] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in warm state. [ 29.235159] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 29.235285] dvbdev: DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T) [ 29.235294] usb 5-1: media controller created [ 29.236556] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered. [ 29.377683] usb 5-1: DVB: registering adapter 2 frontend 0 (DiBcom 3000MC/P)... [ 29.377707] dvbdev: dvb_create_media_entity: media entity 'DiBcom 3000MC/P' registered. [ 29.382424] MT2060: successfully identified (IF1 = 1204) [ 29.943054] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 29.943269] dvbdev: DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T) [ 29.943278] usb 5-1: media controller created [ 29.944541] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered. [ 29.957902] usb 5-1: DVB: registering adapter 3 frontend 0 (DiBcom 3000MC/P)... [ 29.957919] dvbdev: dvb_create_media_entity: media entity 'DiBcom 3000MC/P' registered. [ 29.962896] MT2060: successfully identified (IF1 = 1207) [ 30.608257] Registered IR keymap rc-dib0700-rc5 [ 30.610373] rc rc1: Hauppauge Nova-T 500 Dual DVB-T as /devices/pci0000:00/0000:00:1e.0/0000:06:02.2/usb5/5-1/rc/rc1 [ 30.610673] rc rc1: lirc_dev: driver (null) registered at minor = 1, scancode receiver, no transmitter [ 30.610837] input: Hauppauge Nova-T 500 Dual DVB-T as /devices/pci0000:00/0000:00:1e.0/0000:06:02.2/usb5/5-1/rc/rc1/input14 [ 30.611244] dvb-usb: schedule remote query interval to 50 msecs. [ 30.611251] dvb-usb: Hauppauge Nova-T 500 Dual DVB-T successfully initialized and connected. [ 30.613438] usbcore: registered new interface driver dvb_usb_dib0700 [ 38.643612] vboxdrv: loading out-of-tree module taints kernel. [ 38.644507] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel [ 38.664703] vboxdrv: Found 2 processor cores [ 38.665153] vboxdrv: fAsync=0 offMin=0x30c offMax=0x2094 [ 38.765356] vboxdrv: TSC mode is Synchronous, tentative frequency 2009658826 Hz [ 38.765360] vboxdrv: Successfully loaded version 6.1.44 r156814 (interface 0x00320000) [ 39.163001] VBoxNetFlt: Successfully started. [ 39.224892] VBoxNetAdp: Successfully started. [ 39.953956] kauditd_printk_skb: 7 callbacks suppressed [ 39.953960] audit: type=1400 audit(1683230145.256:19): apparmor="DENIED" operation="capable" profile="/usr/sbin/cupsd" pid=593 comm="cupsd" capability=12 capname="net_admin" [ 40.279290] RTL8211B Gigabit Ethernet r8169-0-500:00: attached PHY driver [RTL8211B Gigabit Ethernet] (mii_bus:phy_addr=r8169-0-500:00, irq=IGNORE) [ 40.309554] r8169 0000:05:00.0 enp5s0: Link is Down [ 40.843970] audit: type=1400 audit(1683230146.148:20): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=699 comm="cups-browsed" capability=23 capname="sys_nice" [ 41.881983] r8169 0000:05:00.0 enp5s0: Link is Up - 100Mbps/Full - flow control rx/tx [ 41.882001] IPv6: ADDRCONF(NETDEV_CHANGE): enp5s0: link becomes ready
Lots of information about the detection and initialization of the various devices in here...
Benchmark
To provide a reference comparison for this era of systems, let's run some benchmarks...
BogoMips
The BogoMips (Wikipedia) pseudo-benchmark has a behaviour where the score is related to the processor clock speed, and has an easily available collection of results from a range of systems (see BogoMips mini-Howto).
Linux 2.6.24, Ubuntu 8.04 LTS (Hardy Heron) for x86:
Calibrating delay using timer specific routine.. 4022.53 BogoMIPS (lpj=8045075) Calibrating delay using timer specific routine.. 4019.32 BogoMIPS (lpj=8038643) Total of 2 processors activated (8041.85 BogoMIPS).
Linux 4.15.0, Ubuntu 18.04 LTS (Bionic Beaver) for x86_64:
Calibrating delay loop (skipped), value calculated using timer frequency.. 4019.33 BogoMIPS (lpj=8038676) smpboot: Total of 2 processors activated (8038.67 BogoMIPS)
Linux 5.10.0, Debian Linux 11 (bullseye) for x86_64:
[ 0.102761] Calibrating delay loop (skipped), value calculated using timer frequency.. 4019.31 BogoMIPS (lpj=8038632) [ 0.241149] smpboot: Total of 2 processors activated (8038.63 BogoMIPS)
These results are in line with the collection of results in the mini-Howto, and our BogoMips results collection.
OpenSSL
The OpenSSL library of cryptographic methods provides a means to test the performance of the methods. Using this we can get a feel for the computational performance of a system, and comparisons with real hardware and other emulations can show how well a particular emulation performs. Since we are mainly interested in old hardware, we'll test using two of the older methods: MD5 and RSA.
- Ubuntu 8.04 LTS (Hardy Heron) for x86
- Ubuntu 18.04 LTS (Bionic Beaver) for x86_64
- Debian Linux 11 (bullseye) for x86_64
Ubuntu 8.04 LTS (Hardy Heron) for x86, with the distribution supplied:
$ openssl version OpenSSL 0.9.8g 19 Oct 2007
Let's see how MD5 and RSA do:
$ openssl speed md5
Doing md5 for 3s on 16 size blocks: 4031698 md5's in 3.00s
Doing md5 for 3s on 64 size blocks: 3263023 md5's in 3.00s
Doing md5 for 3s on 256 size blocks: 2081289 md5's in 3.00s
Doing md5 for 3s on 1024 size blocks: 842184 md5's in 3.00s
Doing md5 for 3s on 8192 size blocks: 129160 md5's in 3.00s
OpenSSL 0.9.8g 19 Oct 2007
built on: Thu Jun 19 20:00:16 UTC 2008
options:bn(64,32) md2(int) rc4(idx,int) des(ptr,risc1,16,long) aes(partial) blowfish(idx)
compiler: gcc -fPIC -DOPENSSL_PIC -DZLIB -DOPENSSL_THREADS -D_REENTRANT -DDSO_DLFCN -DHAVE_DLFCN_H -DL_ENDIAN -DTERMIO -O3 -march=i686 -Wa,--noexecstack -g -Wall -DOPENSSL_BN_ASM_PART_WORDS -DOPENSSL_IA32_SSE2 -DSHA1_ASM -DMD5_ASM -DRMD160_ASM -DAES_ASM
available timing options: TIMES TIMEB HZ=100 [sysconf value]
timing function used: times
The 'numbers' are in 1000s of bytes per second processed.
type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes
md5 21502.39k 69611.16k 177603.33k 287465.47k 352692.91k
$ openssl speed rsa
Doing 512 bit private rsa's for 10s: 18069 512 bit private RSA's in 10.00s
Doing 512 bit public rsa's for 10s: 238736 512 bit public RSA's in 10.00s
Doing 1024 bit private rsa's for 10s: 3923 1024 bit private RSA's in 10.00s
Doing 1024 bit public rsa's for 10s: 90110 1024 bit public RSA's in 10.01s
Doing 2048 bit private rsa's for 10s: 725 2048 bit private RSA's in 10.01s
Doing 2048 bit public rsa's for 10s: 29138 2048 bit public RSA's in 10.00s
Doing 4096 bit private rsa's for 10s: 120 4096 bit private RSA's in 10.07s
Doing 4096 bit public rsa's for 10s: 8817 4096 bit public RSA's in 10.00s
OpenSSL 0.9.8g 19 Oct 2007
built on: Thu Jun 19 20:00:16 UTC 2008
options:bn(64,32) md2(int) rc4(idx,int) des(ptr,risc1,16,long) aes(partial) blowfish(idx)
compiler: gcc -fPIC -DOPENSSL_PIC -DZLIB -DOPENSSL_THREADS -D_REENTRANT -DDSO_DLFCN -DHAVE_DLFCN_H -DL_ENDIAN -DTERMIO -O3 -march=i686 -Wa,--noexecstack -g -Wall -DOPENSSL_BN_ASM_PART_WORDS -DOPENSSL_IA32_SSE2 -DSHA1_ASM -DMD5_ASM -DRMD160_ASM -DAES_ASM
available timing options: TIMES TIMEB HZ=100 [sysconf value]
timing function used: times
sign verify sign/s verify/s
rsa 512 bits 0.000553s 0.000042s 1806.9 23873.6
rsa 1024 bits 0.002549s 0.000111s 392.3 9002.0
rsa 2048 bits 0.013807s 0.000343s 72.4 2913.8
rsa 4096 bits 0.083917s 0.001134s 11.9 881.7
Extracting the relevant figures for comparisons:
- OpenSSL speed MD5 8,192 bytes: 352,692.91k
- OpenSSL speed RSA 4,096 bytes sign/s: 11.9
- OpenSSL speed RSA 4,096 bytes verify/s: 881.7
And an additional set of reference values.
Since this is a 32-bit distribution, this performance will reflect the speed of 32-bit x86 workloads rather than the 64-bit x86_64 workloads the CPU is capable of handling.
Ubuntu 18.04 LTS (Bionic Beaver) for x86_64, with the distribution supplied:
$ openssl version OpenSSL 1.1.1 11 Sep 2018
Let's see how MD5 and RSA do:
$ openssl speed md5
Doing md5 for 3s on 16 size blocks: 10137453 md5's in 3.00s
Doing md5 for 3s on 64 size blocks: 6419619 md5's in 3.00s
Doing md5 for 3s on 256 size blocks: 3052044 md5's in 3.00s
Doing md5 for 3s on 1024 size blocks: 989067 md5's in 3.00s
Doing md5 for 3s on 8192 size blocks: 135526 md5's in 2.99s
Doing md5 for 3s on 16384 size blocks: 68211 md5's in 3.00s
OpenSSL 1.1.1 11 Sep 2018
built on: Mon Mar 22 11:42:42 2021 UTC
options:bn(64,64) rc4(16x,int) des(int) aes(partial) blowfish(ptr)
compiler: gcc -fPIC -pthread -m64 -Wa,--noexecstack -Wall -Wa,--noexecstack -g -O2 -fdebug-prefix-map=/build/openssl-nwsL4a/openssl-1.1.1=. -fstack-protector-strong -Wformat -Werror=format-security -DOPENSSL_USE_NODELETE -DL_ENDIAN -DOPENSSL_PIC -DOPENSSL_CPUID_OBJ -DOPENSSL_IA32_SSE2 -DOPENSSL_BN_ASM_MONT -DOPENSSL_BN_ASM_MONT5 -DOPENSSL_BN_ASM_GF2m -DSHA1_ASM -DSHA256_ASM -DSHA512_ASM -DKECCAK1600_ASM -DRC4_ASM -DMD5_ASM -DAES_ASM -DVPAES_ASM -DBSAES_ASM -DGHASH_ASM -DECP_NISTZ256_ASM -DX25519_ASM -DPADLOCK_ASM -DPOLY1305_ASM -DNDEBUG -Wdate-time -D_FORTIFY_SOURCE=2
The 'numbers' are in 1000s of bytes per second processed.
type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes 16384 bytes
md5 54066.42k 136951.87k 260441.09k 337601.54k 371314.04k 372523.01k
$ openssl speed rsa
Doing 512 bits private rsa's for 10s: 64678 512 bits private RSA's in 10.00s
Doing 512 bits public rsa's for 10s: 1062053 512 bits public RSA's in 10.00s
Doing 1024 bits private rsa's for 10s: 20933 1024 bits private RSA's in 10.00s
Doing 1024 bits public rsa's for 10s: 362425 1024 bits public RSA's in 9.99s
Doing 2048 bits private rsa's for 10s: 3017 2048 bits private RSA's in 10.00s
Doing 2048 bits public rsa's for 10s: 102684 2048 bits public RSA's in 9.99s
Doing 3072 bits private rsa's for 10s: 955 3072 bits private RSA's in 10.00s
Doing 3072 bits public rsa's for 10s: 47916 3072 bits public RSA's in 10.00s
Doing 4096 bits private rsa's for 10s: 417 4096 bits private RSA's in 10.02s
Doing 4096 bits public rsa's for 10s: 26295 4096 bits public RSA's in 9.99s
Doing 7680 bits private rsa's for 10s: 53 7680 bits private RSA's in 10.11s
Doing 7680 bits public rsa's for 10s: 8117 7680 bits public RSA's in 10.00s
Doing 15360 bits private rsa's for 10s: 9 15360 bits private RSA's in 10.23s
Doing 15360 bits public rsa's for 10s: 2057 15360 bits public RSA's in 10.00s
OpenSSL 1.1.1 11 Sep 2018
built on: Mon Mar 22 11:42:42 2021 UTC
options:bn(64,64) rc4(16x,int) des(int) aes(partial) blowfish(ptr)
compiler: gcc -fPIC -pthread -m64 -Wa,--noexecstack -Wall -Wa,--noexecstack -g -O2 -fdebug-prefix-map=/build/openssl-nwsL4a/openssl-1.1.1=. -fstack-protector-strong -Wformat -Werror=format-security -DOPENSSL_USE_NODELETE -DL_ENDIAN -DOPENSSL_PIC -DOPENSSL_CPUID_OBJ -DOPENSSL_IA32_SSE2 -DOPENSSL_BN_ASM_MONT -DOPENSSL_BN_ASM_MONT5 -DOPENSSL_BN_ASM_GF2m -DSHA1_ASM -DSHA256_ASM -DSHA512_ASM -DKECCAK1600_ASM -DRC4_ASM -DMD5_ASM -DAES_ASM -DVPAES_ASM -DBSAES_ASM -DGHASH_ASM -DECP_NISTZ256_ASM -DX25519_ASM -DPADLOCK_ASM -DPOLY1305_ASM -DNDEBUG -Wdate-time -D_FORTIFY_SOURCE=2
sign verify sign/s verify/s
rsa 512 bits 0.000155s 0.000009s 6467.8 106205.3
rsa 1024 bits 0.000478s 0.000028s 2093.3 36278.8
rsa 2048 bits 0.003315s 0.000097s 301.7 10278.7
rsa 3072 bits 0.010471s 0.000209s 95.5 4791.6
rsa 4096 bits 0.024029s 0.000380s 41.6 2632.1
rsa 7680 bits 0.190755s 0.001232s 5.2 811.7
rsa 15360 bits 1.136667s 0.004861s 0.9 205.7
Extracting the relevant figures for comparisons:
- OpenSSL speed MD5 8,192 bytes: 371,314.04k
- OpenSSL speed RSA 4,096 bytes sign/s: 41.6
- OpenSSL speed RSA 4,096 bytes verify/s: 2,632.1
And an additional set of reference values.
Debian Linux 11 (bullseye) for x86_64, with the distribution supplied:
$ openssl version OpenSSL 1.1.1n 15 Mar 2022
Let's see how MD5 and RSA do:
$ openssl speed md5 rsa
Doing md5 for 3s on 16 size blocks: 10102235 md5's in 3.00s
Doing md5 for 3s on 64 size blocks: 6470641 md5's in 3.00s
Doing md5 for 3s on 256 size blocks: 3055212 md5's in 3.00s
Doing md5 for 3s on 1024 size blocks: 992166 md5's in 3.00s
Doing md5 for 3s on 8192 size blocks: 135580 md5's in 3.00s
Doing md5 for 3s on 16384 size blocks: 68190 md5's in 3.00s
Doing 512 bits private rsa's for 10s: 67192 512 bits private RSA's in 10.00s
Doing 512 bits public rsa's for 10s: 1017864 512 bits public RSA's in 10.00s
Doing 1024 bits private rsa's for 10s: 22024 1024 bits private RSA's in 10.00s
Doing 1024 bits public rsa's for 10s: 355239 1024 bits public RSA's in 9.99s
Doing 2048 bits private rsa's for 10s: 3067 2048 bits private RSA's in 10.00s
Doing 2048 bits public rsa's for 10s: 102377 2048 bits public RSA's in 10.00s
Doing 3072 bits private rsa's for 10s: 967 3072 bits private RSA's in 10.01s
Doing 3072 bits public rsa's for 10s: 48270 3072 bits public RSA's in 10.00s
Doing 4096 bits private rsa's for 10s: 419 4096 bits private RSA's in 10.01s
Doing 4096 bits public rsa's for 10s: 27490 4096 bits public RSA's in 10.00s
Doing 7680 bits private rsa's for 10s: 53 7680 bits private RSA's in 10.07s
Doing 7680 bits public rsa's for 10s: 8120 7680 bits public RSA's in 10.00s
Doing 15360 bits private rsa's for 10s: 9 15360 bits private RSA's in 10.20s
Doing 15360 bits public rsa's for 10s: 2057 15360 bits public RSA's in 10.01s
OpenSSL 1.1.1n 15 Mar 2022
built on: Sun Feb 5 21:23:17 2023 UTC
options:bn(64,64) rc4(16x,int) des(int) aes(partial) blowfish(ptr)
compiler: gcc -fPIC -pthread -m64 -Wa,--noexecstack -Wall -Wa,--noexecstack -g -O2 -ffile-prefix-map=/build/openssl-8bYUb4/openssl-1.1.1n=. -fstack-protector-strong -Wformat -Werror=format-s
ecurity -DOPENSSL_USE_NODELETE -DL_ENDIAN -DOPENSSL_PIC -DOPENSSL_CPUID_OBJ -DOPENSSL_IA32_SSE2 -DOPENSSL_BN_ASM_MONT -DOPENSSL_BN_ASM_MONT5 -DOPENSSL_BN_ASM_GF2m -DSHA1_ASM -DSHA256_ASM -DS
HA512_ASM -DKECCAK1600_ASM -DRC4_ASM -DMD5_ASM -DAESNI_ASM -DVPAES_ASM -DGHASH_ASM -DECP_NISTZ256_ASM -DX25519_ASM -DPOLY1305_ASM -DNDEBUG -Wdate-time -D_FORTIFY_SOURCE=2
The 'numbers' are in 1000s of bytes per second processed.
type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes 16384 bytes
md5 53878.59k 138040.34k 260711.42k 338659.33k 370223.79k 372408.32k
sign verify sign/s verify/s
rsa 512 bits 0.000149s 0.000010s 6719.2 101786.4
rsa 1024 bits 0.000454s 0.000028s 2202.4 35559.5
rsa 2048 bits 0.003261s 0.000098s 306.7 10237.7
rsa 3072 bits 0.010352s 0.000207s 96.6 4827.0
rsa 4096 bits 0.023890s 0.000364s 41.9 2749.0
rsa 7680 bits 0.190000s 0.001232s 5.3 812.0
rsa 15360 bits 1.133333s 0.004866s 0.9 205.5
Extracting the relevant figures for comparisons:
- OpenSSL speed MD5 8,192 bytes: 370,223.79k
- OpenSSL speed RSA 4,096 bytes sign/s: 41.9
- OpenSSL speed RSA 4,096 bytes verify/s: 2749.0
And an additional set of reference values.
From the three runs of each method performed, the performance looks to be similar to that seen with the OpenSSL 1.1.1 included with Ubuntu 18.04 LTS.
No comments:
Post a Comment